Thank you for your video! You made it look relatively easy, and it was. The hardest part was getting my stock radio out: the right side "wing" that holds the stereo in place had flared out so far that the removal keys could never get on the outside of it to squeeze it in to pull out. Had to Dremel that side out. And that was after removing the temp control panel below it to try to get more room to maneuver. That took about three hours. But it all works. Thanks again.
Hyped Up Onofre both bought at Best Buy. Visit www.metraonline.com and input your car info and it will show you the part number for the kit you need depending if its a single din or double din your installing. Reference that model number on Best Buy's website and you should be able to order the kit and harness from the online or if you'd like go to your local Best Buy car audio installation department
Matthew Miller if it's a single din radio your installing the radio will have a metal sleeve which will slide into the dash kit and will need to be secured by bending some tabs on the sleeve. If it's a double din radio the kit will have the proper ISO brackets included which you will use to mount the new double din radio onto the kit