Hello everyone, welcome back to the Shed!
In this video, I am going to be removing the old rubber clutch hose from my Gen 6 VFR800 VTEC and replacing it with a nice shiny new one supplied by HEL Performance.
The hose on this bike is the original one fitted since the bike was new so far as I can tell, so this is one of those jobs that I really should be turning my attention to, if only to prevent a premature failure whilst out on the road; and as I have replaced the brake hoses, it seems weird not to give the clutch the same treatment!
The link to the clutch bleeding process can be found at the link below.
• Bleeding And Replacing...
I bought the line direct from HEL Performance at the link below, I actually bought it during the Black Friday Sale. HEL Performance have traditionally given a generous 40% discount every year so if you can wait until the next one then there is quite a hefty saving to be made.
They offer these lines in a variety of different colours too!
www.helperformance.com/honda-...
The vacuum pump that I use to bleed the system afterwards
ebay.us/alKJSK
All links to products are affiliate links for which I will receive a small commission on any purchase made, at no additional cost to you.
I hope that you enjoy the video.
Don't forget to like, subscribe and comment for future content from Kev's Shed!
If you wish to offer support to my channel and enable me to continue to bring you quality content then please check out my Patreon page at the following link - www.patreon.com/user?u=67741595 - Thank you.
Join me on the socials at the following links
Kev's Shed on Facebook - / 561477094498994
Kev's Shed on Instagram - / kevins_shed
Kev's Shed on Twitter - / catakev79
28 май 2022