2004 Honda Pilot 3.5l New Fuel Pump, Crank No Start, Cause and Effect?

Подписаться 8 тыс.

Просмотров 21 тыс.

50% 1

Today we have a 2004 Honda Pilot 3.5l with a new fuel pump and the customer said it is a crank no start. Follow along as we try to figure out this mess. OEM pumps are indefinitly backordered at the time of filming. I called 6 dealers.
Join this channel to get access to perks:
/ @robertdotterer
Tools Used:
Snapon Zeus
www.snapon.com/EN/US/Diagnost...
High Current Probe with Custom Lead
www.aeswave.com/High-Current-...
Autel MaxiSYS MS909:
www.aeswave.com/Autel-MaxiSYS...
DIY Test Light
• How to make your own L...
Adjustable Insulation Piercing Test Clip with B-plug Inputs
www.aeswave.com/Adjustable-In...
Power Probe Master Combo Kit (PPkit04)
www.aeswave.com/Power-Probe-M...
Fuel Volume Tester (Not The One I Have)
MV5545 Fuel System Test Kit
www.aeswave.com/MV5545-Fuel-S...
Precision Low Amp Probe
shop.snapon.com/product/VERDI...
Picoscope 4425:
www.aeswave.com/PicoScope-442...
0:00 Intro
0:30 We Got A Dead Battery :(
1:30 Doing A Relative Compression
3:40 Live Data / Active Tests
4:43 Testing The Fuel Pump
5:37 Hooking Up The Power Probe
10:22 Voltage Dropped!
11:23 New Relay
13:54 Bad Ground? Looking at A Diagram
14:55 Checking Voltages
17:04 Fuel Pump Curret!!!
19:05 Fixing The Ground
20:40 Checking Relay Voltage
2142 We Found A Problem
24:10 New Fuel Pump
24:40 New Fuel Pump Current
28:33 Testing FUel Pump Pressure and Volume
34:00 Used OEM Fuel Pump Testing

Авто/Мото

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@alexandriabowe 2 года назад

Another awesome diag Rob. You're meticulous in your approach testing not guessing. I am learning so much every time I watch one of your videos.

@RobertDotterer 2 года назад

Thank you, it means a lot.

@8power0 2 года назад

THAT WAS AN OUTSTANDING DIAG,, I ALMOST WISHED IT DIDN'T END,, THANKS FOR YOUR TIME !!!!!!!!

@RobertDotterer 2 года назад

Thank you!

@alrifainidal 2 года назад

sometimes used parts better than new junk parts, nice work I was watching you doing this with all my attention. great job Mate

@RobertDotterer 2 года назад

Thank you for your support!

@christophermccullough431 2 года назад

Hell yeah!! I'm glad I stumbled on this video. Good job running diag bro.

@neverstoplearning382 2 года назад

This one was a really good one. Thanks for sharing it.

@RobertDotterer 2 года назад

Thank you for taking the time to watch!

@cmack5713 Месяц назад

Great video buddy!!!

@OneLegged-honda-mechanic 2 года назад

Good one! I get tired of AM parts, but I still use them (sparingly). When availability is so much easier/faster than dealer and plus some dealer parts discontinued or back ordered you end up with little options.

@RobertDotterer 2 года назад

I also get tired of issues too. It sucks when you cant get something that at least works the way it is supposed to.

@craighanson6755 2 года назад

Great use of the Power Probe 4

@RobertDotterer 2 года назад

Thank you!

@rbarr1200 2 года назад

Awesome. Great work.

@RobertDotterer 2 года назад

Thank you.

@EATSLEEPFARM 2 года назад

You killin it hear lately bro👍

@RobertDotterer 2 года назад

I don't know about that. I think these cars are killing me.

@EATSLEEPFARM 2 года назад

@@RobertDotterer 😂 I heard that. Still all the same your showin out man your wide array of skills is amazing. Keep these vids comin!!

@ErnestoKiller 7 месяцев назад

Excelent muchas gracias

@RobertDotterer 7 месяцев назад

Thanks for watching

@robertgorge1152 Год назад

Good job

@weshawkins7165 2 года назад

I’ve watched your channel, South Main Auto, Pine Hollow Diagnostics and Watch Wes Work and you all seem to have one thing in common lately and that’s crappy aftermarket parts. Now who gets the bill for your time changing out bad pumps? Also shows the importance of using a scope.

@RobertDotterer 2 года назад

Crappy aftermarket parts always cause issues. People do not realize that they are usually no where near the quality of an OEM part. Thank you for taking the time to watch!

@johanvanbelzen8565 2 года назад

How about the 2 dead holes in the beginning of the video you showed with the relative compresion waveform? The cranking sound suddenly beter halfway the video. Btw, i never exspected this outcome. Like it!!👌

@RobertDotterer 2 года назад

I think it may have been from the car sitting for a few months or if someone was spraying something in the motor. We could have had washed out cylinders.

@arthurfricchione8119 2 года назад

Rob another good one. I had a similar problem on my 99 Accord 3.0. The circuit board inside the relay the solder joints crack from heat and stress. I reflowed the solder joints and it’s working fine. Purchased a new relay just in case. Thanks for sharing Artie 👍🎄

@RobertDotterer 2 года назад

I thought about reflowing it I just didn't know if there was any other issues.

@arthurfricchione8119 2 года назад

@@RobertDotterer looked like it was pretty well cooked. I wonder if the pump amperage cooked it. Hope your feeling better 👍

@bartscave 2 года назад

The Delphi site specs show the pump draw for that application is 10A. Surprised the oem model is so much less.

@RobertDotterer 2 года назад

I don't trust their site. If you look up just the pump I think it says 5amps then somehow the assembly shows 10a.

@454lando 2 года назад

Incredible diag., how much time did you put into it? Keep up the good work

@RobertDotterer 2 года назад

Probably had about 3h of diag in this one because of the multiple issues. This took more than most.

@danman9017 2 года назад

i wonder how many amp the pump draw when you aply direct voltage to it with the power prob

@RobertDotterer 2 года назад

Good question.

@arthurfricchione8119 Год назад

Rob thanks for sharing. Didn’t now the they are designed for ethanol. This relays are notoriously known to crack. You can just reflow the solder joint. I keep a spare relay just in case for my Hondas. Rob you still have your premium channel? I’ll check it out. Would like to signup for it Artie 👍

@RobertDotterer Год назад

Yea it's still there. I want to get more content for it. There is a lot there already.

@arthurfricchione8119 Год назад

@@RobertDotterer thanks Rob I’m going to join to support you. 👍

@shinigamidaiko666 2 года назад

Where did you get that test light you had connected to the pump??

@RobertDotterer 2 года назад

I made it. The video should be linked in the description for it.

@kennethcedeno6022 11 месяцев назад

Does the aftermarket fuel pump consume more gas that it should ?

@RobertDotterer 11 месяцев назад

If it did it would just return to the tank through the regulator. It wouldn't hurt anything.

@waynemustache8367 2 года назад

Dude drops the relay before putting it in. An calls it a bad relay 😅

@RobertDotterer 2 года назад

😂

@kennethcedeno6022 Год назад

So what was the problem? Fuel pump main relay?

@RobertDotterer Год назад

That and the aftermarket fuel pump, and the wire melting in the connector

@kennethcedeno6022 11 месяцев назад

@@RobertDotterer The aftermarket fuel pump would consume more gas?

@nickayivor8432 Год назад

What do you call INTELLECTUAL AND PRODIGY AND SUBSTANTIAL ADD ONE MORE KNOWLEDGEABLE THE ANSWER IS ROBERT DOTTERER My teacher Tutorial brilliant video amazing footage thank you very much helpful information video Take care and have a great Evening ACCOMPLISHED ROBERT DOTTERER From Nick Ayivor from London England UK 🇬🇧

@diymisfit_Mechanic_UDX404 2 года назад

One problem causing more problems

@RobertDotterer 2 года назад

Yea, it got interesting really fast. I never had to buy a used pump before.

@ShitWrangler 2 года назад

@@RobertDotterer honda oem pumps are pricey too but seem to have a reputation for lasting, and if an unskilled technician fires the parts cannon on a honda fuel pump it's pricey. i've had it happen for a civic, $200 aftermarket, $600 used oem or $800 new oem. best to get a oem for that one from all youtube mechanics, so may as well listen.

@RobertDotterer 2 года назад

Oem is always best. I couldn't get a new oem one. They are indefinitely back ordered.