2005 Toyota Corolla CE Rear Drum&Shoe and Wheel Cylinder Replacement 

Nice thorough explanation. Top tip taping friction material. Professional & detailed. Lubed support tabs that most people skip. Thank you. 🏆

4/7/24. Thanks for the amazing tutorial. God Bless you great job

Thank you very much for this video. You make it look so easy . I normally have a problem with the high tension return springs. Great video. 👍🏻

Good video good explanation watching you from Africa Zambia.

You should use a shoe lace to pull a spring on your left hand and use your plier to guide it in with your right hand.

Thoroughly done.

My 2005 Corolla has been making a low 'brrrrrr' or low soft grind 'brrr' sound from the rear when I brake. The front pads were changed recently and the rear pads a few years back. Someone told me the rear wheel cylinders are wearing out. Not sure if hearing this sound means I need new rear wheel cylinders.

When setting/removing springs I found using a hook tool robust enough to pull the spring if you have the hand strength.

Nice video ! Could you please tell me what mm wrench is for the bleeder screw and the mm wrench for the brake line coupling nut that connects to the rear cylinder there.Thanks

Thanks for the video!

GOOD JOB, THANK YOU 😎👍🏾

Well explained.

Excellent video, but question? What happens if you accidentally hit the cylinder while it's pitched off and some brake fluid leaks out on both sides of the rear brakes? Are the cylinders now damaged? Also when this happened, the shoe's opened and I am not able to squeeze them together to close the cylinder. Should I bleed the line to alleviate the pressure in the line?

You Mentioned to Bleed Rear Brake first on Far Right Side then Left then Right Front then Left. Which side of Car Front or Back looking to Start Right Side?

I have never had to take of the springs to do the cylinder, with a big screw driver you just pryopen one of the sides and you can remove and install new one like that

What is the part number for the wheel cylinder you used?

Don't use a cutter plier on springs and things you intend to reuse.

I need help I put a new cylinder and it busts within 5 minutes of driving

21:00

Replacement the spring kit every time. They are cheap.

21:00