2010-2016 Ram truck cabin air filter kit from genosgarage.com 

Whoever gave this video a "dislike" obviously doesn't own one of these trucks.... You did a great job.

I really appreciate people like you taking the time to help folks work on their own vehicles. THANKS!

Great job indeed. I was wondering how my truck is ALWAYS dusty inside. Now I know!! I had no idea there was an cabin filter and I looked throughout my user guide several times. I bought a new oil filter and the guy asked in I needed a cabin filter and after a long story...I now know how to do it - and I'm a female! Love my Dodge and my Hemi!!! My cabin filter is cut-out but NO FILTER!!! And the sales guy never told me about this. I know so much more about my truck now and I'm certain I would be a GREAT Dodge sales rep - not that I want to be! Thanks for all you help and I'll be getting that filter in no time!! Keep up the great work!

Thank you so much for your profressional and very informative videos. Being in Australia it is hard finding qualified RAM mechanics in my area so really appreciate your efforts.

You do an excellent job of explaining the steps, and not skipping over the mundane stuff that isn't mundane to us laymen. Thanks

Congratulations David. Your info is great. I have a 2013 and was disappointed that it didn't have a cabin filter , now it's going to get one.

Worked for my 2016 RAM 1500 as well. Thanks for the great video! Only a 15 minute job for me.

Thank you, Thank you! I had checked a couple of other sites and of course no help! You informed me that I indeed did not have a door to install the filter I wanted to change! Great job, and thank you again!

David another great Video I've got a 2014 with 319,650 on it and you've helped me keep her going strong

Very well made and useful video. Thanks for taking the time to do this. I've got a 2010 Ram and I plan on doing this upgrade this weekend. God bless!

I'm five years late but great video! Been thinking about doing this to my 14 Ram Laramie, thanks!

I just installed this on my 2010 3500. To facilitate using the box-cutter, I first drilled about eight small holes where I needed to go, then just connected up the holes with the cutter. A 15-min job. Thanks for all the tips. (PS: My evaporator, replaced yesterday by a shop after 94k miles, didn't have any mud on the backside like you've shown, but boy was it ever riddled with refrigerant leaks!)

Getting my ac evap core replaced today and will definitely be getting the cabin filter. Tks for the great how to video!!

Just bought this kit and like so many times before, once again your video is the “go to” for me. Thanks for this. 👍🏼👍🏼🇨🇦

Great video, installed mines today. Be patient and cut, cut, cut. It works great.

This is one of the Best Tech I ve seen

Nobody does it better on utube, very informative an to the point👍

Awesome vid. I couldn't wait to order a kit via the mail so I cut out a piece of filter (8"X8") from a large home HVAC filter that I purchased at HomeDepot. Installed it and put two strips of Duct tape across the door opening making sure to seal it around the edges well. Works just fine.

thank you ! I have learned and accomplished so much from your dedication and knowledge.

Thank God for your videos. You saved me a ton of time and money! Thank you from the Jersey Shore!

This was an Outstanding Video on how to do this. I will certainly be doing it myself. Thanks!

Another great video young man thank you

Excellent ,Just installed in my 2009 Ram 1500 ,Great How To !

Thank You So Much for Posting . Very clear and informative.

Yeah, I've been so busy lately that I forgot that this is something I wanted to do... So, since I have a 2010 3500, and you are "The Man", well, not "THEE" Man, but, definitely one of them, here I go... Thanks for the How to Videos, Hope the Family is doing well !!!!!

Great video, with easy instructions on how to install it 👍👍

thanks for the video,I just bought a 16 Laramie ,would have never guessed it didnt have an in cabin air filter,will be doing this very soon.

Great video for new owners dodge thanks

Awesome video

I have followed your instruction and I did a successful installation, thank you

One of the easiest mods ever! Chrysler uses the same cabin filter door across a ton of vehicle platforms! Once I got the filter in there the clips were nice and tight! Absolutely awesome!

This is fantastic information and a wonderful video! Thank you!

Much needed upgrade 👍👍

Good info David .

Great video. Thanks very much for keeping it clean. GOD BLESS.

Dude your amazing!!!! Thank you!!!!!

Thank you for the video, very helpful!

great video and explanation on what causes the air flow to reduce and hinder the cooling man!

Your videos are awesome

Thank you I will be fixing my AC. FILTER...💯

Great video. Will add the filter to my 2014 Cab and Chassis

Thank you. God bless you

Excellent!

Great vid very thorough

AWESOME!!! THANK YOU!!! excellent video!!

I did this mod on my 2009 Ram, bought the kit from Genos. They included a catalog and a couple freebies in the box(nice touch) You will definitely notice less dust in the vehicle. Be careful not to drop cut pieces inside. It's a tight fit, you might have to bent it and wiggle it in. I would recommend k&n filter or any reusable filter as they are expensive. Very good video instructions

Thank you good sir!!

Great video, thanks for the info. I'm definitely going to order one.

Thank you.

Awesome …thanks for this 🙌🏻🙌🏻🙌🏻🙌🏻

Great video

Thank you, Great Vid. Helped a lot. I thought I was losing my mind trying to get the non-existent filter out. What was dodge thinking. Saved them how much a truck and upset a lot of customers.

Thanks doing mine today

Great job....thanks...2011 Ram

I'm gonna start off with a NEW blade and see how it goes. Good video. Thanks. I really thought a 2014 Ram 1500 Laramie would have had a cabin filter. SMH.

Great job 👍

My 2012 3500 started leaking freon in 2021 at about 60,000 miles. It was 1200 bucks to fix. Now sometimes, it smells like freon just when you turn the AC on.. Sometimes not. But after spending 1200 bucks, I'm not real happy. Thanks for this video showing how to put in the filter. I wonder why Dodge built the opening but decided to not install a cheap filter. At least we have videos like this!!!

My cousin, a friend and I done this back in 2012 to a '10 1500, '11 3500 and a '12 2500. The friend got the doors from the dealer and the filters came from one of the chain auto parts stores. If I remember correctly it was the filter for a 2010 dodge caliber that we used. everything fit perfect but my only complaint was the reduced airflow from the vents even with the filter in the correct flow direction. I wasn't that much of a drop but it was noticeable compared to no filter.

thank you

Just wanted to say that I have watched several of your video's and I want to say thanks for your time and effort. I have a 2015 ram 1500 and you do an excellent job explaining you video's very easy to follow and to the point. Thanks again.

Very cool

Just checked my 2016 3500. No Door or Filter. Will be putting in one ASAP. Thank You.

Thanks --- used a box cutter but had some small pieces fall in, had to remove blower motor to make sure all pieces were out. So be careful. Heating up the box cutter sounds like a great idea. It was very easy to remove the blower motor -remove 1 panel and 3screws and it comes right out. Thanks for the video.

Thank you for sharing, The soldering gun looks to big to get in to do the job and way to hot. I modified a Weller (pencil type) soldering iron tip to except a modified #11 Ex-ado blade and made a easy perfect cutout without any loose derby getting down into the fan. I cut down a new larger cabin filter I had left over from a car I sold on my band saw. Size 7.25" X 8" and about .75" thick. I used duct tape instead of the $18 leaky front plate with the easy to brake off plastic latches. Duck tape was designed for air ducks and a 9" strip seals tightly.

great video sir.

Great video thanks. I'll be checking out Geno's.

Thank you so much amazing video great help

GREAT !!! THANK YOU SO MATCH!!!!!!!!!!!!!!!!!!!!

Great video like always👍

Fyi, the mopar filter kit comes with a crappie filter. I ordered a much better filter (Purolator Boss) at the same time I ordered the kit. Was happy I did.

Thanks,excelent, good explanación,clear,and undertable,thanks,fron,san benito tx.

cool not to far out .... I find that the right top corner is a bit of a pain to cut out as you don't have much room after I done the cut out I found out that there was no filter in the box i'm guessing either Chrysler didn't put one in or the previous owner had it removed by dropping the dash by a mechanic either way I now have a filter in and my air flow is much cleaner thank you so much for your help & videos they are very helpful

Buen video GRACIAS ... good job.. thanks

Nice install brother just order mine i have a 15 sport and it has the same set up to install cabin air filter

Thanks you super video!

Still boggles me that dodge did not take the 10 minutes like the awesome mechanic did to install the filter from factory. Thanks again on this video.

I was going to get this kit for my 2017 and low and behold it has the door and filter already installed.... for once Dodge Engineers did something right my last one had nothing and dust was a nightmare

Yes, Thank you. I found out at 70K miles my wifes truck needs this modification. 2015 Ram didn't come with the door.

Appreciate ya keeping this video up. 👍 Quick question - how to determine correct install if filter lacks an arrow? Most filters on Amazon no longer have an arrow (in 2023). My used 2011 RAM 2500 didn’t have a cabin filter installed so followed your instructions and saved $70 labor at Dealership. 🥳🎉💰

Thak you great video!!!

very good very good

Man thats absolulty the best video ive found for dash removal. Clogged Evaporator i never thought of wow what a mess that thing was. Im having heat issues in mu 2010 w/ 6.7 getting ready to pull it apart. This just made me more comfortable attempting it. Question if the evap coil was that bad what did the heater core look like ?

*eye brows rise* Ran out to my 2014 RAM (bought used) on lunch hour. No air filter. Thanks MotorCity Mechanic. I'm going to do this up soon. In the mean time, I'm going to shake my fist at FCA.

Okay everyone. I did this thing with new razors and such. It is not as easy as this video suggests. 1: Wear gloves, I couldn’t tell where I was so I had to take mine off. Got a few cuts from banging around while trying to make the cuts. 2: get a light in there to help you see what you’re doing. My hands and equipment made so many blind spots. 3: it’s not easy to cut through that plastic. The two top corners are reinforced. You’ll want to try to cut perpendicular. The top corners are going to give you some trouble. 4: the filter that comes with the kit is crap. Search and order a good filter before you do this. 5: the cover door does not want to go on easily. Hook the left side then use a tool to push the right side (very important) CLIP in. It is very hard but push on the clip release to get it to latch. 6: you will have to wrestle the filter in if you purchase a good one. 7: okay good luck and once you start you’ll have to finish. 😀. Oh and it took me about an hour and I had to do a lot of contorting. Hope this info helps someone. Please share this because there are a lot of videos on how to do this and I cannot post on all. 😀

Great video. My only question is, I got the kit form geno's garage and did the things according to your instructions. All seems ok except that the cover does not snap in place, is it suppose to? Thanks for your help.

I traded my 2010 Avenger in for a 2014 ram 1500 quad cab after watching this video I did check to see if my truck a/c filter has or has not been changed found out just looking where it's located at it has not been changed before I ordered the kit from Geno's I should be getting it within a week

Thanks, Just bought a 2012 1500. can that coil be inspected when this opening is made? curious as the age of the truck

Great video thanks for the info, any Geno's is the only place to get 6.7 ram parts

Thanks for this video. What the heck was Chrysler thinking (or were they?) when they didn't already have this feature with the quick release door? kinda sucks they got to make their customers cut the door out.

heat up that box cutter and a torch ;) How hard is it to check the heater core to see if its plugged? I have a bore scope. Love geno's too!

I purchased this kit a few months ago. It cut pretty easy, but upon turning on the AC today I heard a whistling sound coming from the glove box. When I arrived home the door is not staying attached to the box. The clips are not broken but it doesn't stay clipped.

A multi tool will work as well to cut Plastic !

thanks for the info i will be doing mine asap

Great video and very well detailed as always. My only question is why would they make a compartment where one would have to literally cut it and replace it with a plate? Seems backwards to a prestigious truck not so?

So there's no need to cut out that step down below the large rectangle?

Thanks so much. Delivery Geno's Garage to Canada to? Or is in Canada something similar? Michael

Great video! I have an '06 Ram 2500 MegaCab (diesel) with terrible A/C performance. Even with the fan on high, all it does is make more noise with very little increase in actual air flow! Wondering if the condenser is clogged like you showed or if there is another fix? I don't want to drop my dash, but I also don't want to take it to a dealer to fix it $$$. Any shops you recommend in So. Cal. to do something like this? Thanks!

Hey bud I have a question my 2016 ram 3500 6.7 is making a high squeal when in the throttle and when using exaust brake. Which I use a lot as I tow about 18k lbs all The time please let me know your thoughts thank you 🙏🏻

I see he the broken tab from trying to mess with it before it got taken in to the shop, too. Now I don’t feel like a jerk.

Great video. Kinda sucks that RAM did not take this small step to help preserve the life of the AC system. Seems like one way to get repair business for their dealerships.