Тёмный
No video :(

2010 Chevy Cobalt Intermediate steering shaft replacement 

Mike Legary
Подписаться 90
Просмотров 50 тыс.
50% 1

This is my first attempt at a how to video some spots are out of focus sorry but for the most part it turned out pretty good

Опубликовано:

 

21 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@stephencurry8552
@stephencurry8552 2 года назад
LOL! A few years have passed, I am not privelaged by watching your video. Thank you.
@chrispage9973
@chrispage9973 3 года назад
Saved me a bunch of time and money bud. Great vid even 2+ years later!
@PappaSmurf69
@PappaSmurf69 5 лет назад
this just started on my 2007, perfect timing too, best video i've found on doing this. thanks bud
@moondog67100
@moondog67100 5 лет назад
your welcome ....good luck mate
@grigv.5205
@grigv.5205 2 года назад
Great! Thanks to guys like you who makes those kind of vids so we don't waste our time and money. 👍 I got same problem btw.
@the.notorious_kk7710
@the.notorious_kk7710 3 года назад
Appreciate this video. Was trying to diagnose the problem myself and was thinking either CV axle or power steering motor. Glad I saw this.
@Pyrosiege
@Pyrosiege 2 года назад
Thanks for the video! Definitely easier than I thought it would be. They did the TSB on my 2008 but it started doing it again a few years later. Such a pain..
@EndofanAge
@EndofanAge 5 лет назад
About to partake on this endeavor myself thanks for the great video
@moondog67100
@moondog67100 5 лет назад
good luck
@phattony9057
@phattony9057 4 года назад
Just finished doing this job on my Pontiac g5 gt mine looked just the same was about to break.. also did the front struts and sway bar links and rear shocks also brakes and rotors all around...also an oil change and fog light replacement
@adrianmatthews9325
@adrianmatthews9325 5 лет назад
Doing mine today, thanks for the reference material.
@cycler2004
@cycler2004 4 года назад
Excellent video sir!!! I have a 2007 HHR that I need to tackle. This video helped me a great deal. Cheers!!!
@joshuarobinson2233
@joshuarobinson2233 2 года назад
Excellent video! Doing this to my 2010 malibu this weekend! Thanks for the information, mines just as bad. Very scary to drive with!
@mr.boostang2064
@mr.boostang2064 5 лет назад
Awesome video, my 09 cobalt has made a clunky sound while braking and going over bumps for years now, I'll check this shaft out to see how it looks.
@raymondwagoner4896
@raymondwagoner4896 5 лет назад
Mine is to the point of turning the wheel it locks up.
@theroyalcrownedtiger2946
@theroyalcrownedtiger2946 4 года назад
I have a Cobalt, with mine the control arm bushings ( hockey puck shaped bushings ) were causing the clunking sounds when going over bumps, and sometimes when braking, after the control arms were replaced, no more clunking sounds.
@theroyalcrownedtiger2946
@theroyalcrownedtiger2946 4 года назад
Keep in mind you can get just the control arm bushings by itself.
@mrfranciscojuarez187
@mrfranciscojuarez187 5 лет назад
Thanks for taking the time to make this video.
@jameswarner5428
@jameswarner5428 5 лет назад
Thanks so much... super first how to... helped a lot.. keep it up.
@luisgamez9941
@luisgamez9941 4 года назад
Just a thought nut if you're working on your vehicle might want to get longer extensions and a impact driver just makes some things a whole lot easier.
@cutehumor
@cutehumor 5 лет назад
My 2009 cobalt is making a clicking sound when turning the wheel at a stop. There is also vibration coming from the steering wheel when applying the brakes. It's not the front pads/rotors, I changed those out and it still vibrates. I'm going to check my steering shaft this weekend. I don't want to crash with my family in the car. You are not the only person to mention how rusty this shaft got and the joint looseness. It appears only two bolts hold this in place, but like you said it's a big pain in the ass to get it out. Thanks for the video
@billlangdon193
@billlangdon193 5 лет назад
Clicking is probably CV axle. They click when turning if they are bad. Will also cause viberation
@billlangdon193
@billlangdon193 5 лет назад
One more thing to mention is I have bought new rotors that were warped from the factory. Never take any thing for granted. I replaced 3 power steering pumps because 2 were junk from a reputable auto parts store
@just__dave
@just__dave Год назад
I have an 07 with the infamous “Clunk” happening. I’ve replaced just about every single suspension component thinking one of those must be the culprit. Low and behold, the clunk persists. Not a total loss, those things were in need of replacement anyway, but next up is the intermediate shaft. If that doesn’t fix it, I’m going to replace the entire rack & pinion. Beyond that, a good shove over a steep cliff ought to fix the problem. 😅
@MrShitrope
@MrShitrope Год назад
beware of crappy parts,cough dorman and cardone got same car ask me how i know lol
@just__dave
@just__dave Год назад
@@MrShitrope agreed. Duralast aka Didn’tlast is another one. The clunk is gone. I think it was a combination of warped brake rotors and wheel bearings that were starting to go bad. Replaced both at the same time and now no more clunk. But now my tires need replacing. If it’s not one thing it’s another.
@MrShitrope
@MrShitrope Год назад
@@just__dave moog premium bearings last about 60.000km then start growling again,just out of warranty grrrr, il jus rip em out at 50.000kms and get new ones on warranty thats what you got to do these days!!! friggin crappy parts
@trazy38
@trazy38 4 года назад
i used a swivel 13mm and 24 inch extension, then a 12 inchx1/2 stainless rod and 4lb hammer to pop it off
@stevenyoung3247
@stevenyoung3247 4 года назад
SAME PROBLEM YOU ARE A SAINT
@trazy38
@trazy38 4 года назад
i did struts, shocks, bearings, swaybar links, cobtrolarms, tierods, steeribg rack,
@jeremybode3129
@jeremybode3129 4 года назад
There is a trick because it telescopes and old ones freeze up and its impossible to get off without cutting it in half. I found that out. Mine was about to snap also.
@Radienleo
@Radienleo 4 года назад
Cobalts have a stupid amount of suspension issues endless steering issues, if you can do it by learning from people like this person more power to you....you CAN do it yourself...save money and try.... I own a 2007 with 40'000 miles on it and its had both lower control arms and rear struts replaced now this issue 100% is the next problem. I'v had the power steering assist replaced along with the key/ignition recall..its endless folks. From a new car frame tested in Europe LONG before making its way replacing the Caviler in the USA you'd think Chevy had there sh** together but here we are..Proudly made in mexico south of texas for US dupes willing to buy it.
@moondog67100
@moondog67100 4 года назад
Yepp I have replaced all that stuff I will never buy a cobalt again
@dylanrich5256
@dylanrich5256 2 года назад
My 08 cobalt LT coupe has 245,000 miles and still runs fantastic. Drove it to a few different states no problem. About to do this job today 👍
@alexanderpaul5087
@alexanderpaul5087 5 лет назад
I just did this replacement. Picked up the part off rock auto. I followed all instructions. My only concern is that I had my wheels straight and my steering wheel straight. But when I went to do a test drive when I try to drive straight the car goes to the left a little not much. You think an alignment or wheel balance is needed? I would hate to do a do-over with this part
@moondog67100
@moondog67100 5 лет назад
You should get an alignment. when I did my first one I was off by a couple of teeth on the shaft so rather then take it all apart I opted to get an alignment. let me know how you make out
@outlawwill5483
@outlawwill5483 Год назад
I spent 2 hours trying to get it out so hopefully this video will help
@pedrovelasquez5121
@pedrovelasquez5121 5 лет назад
thank you, very good video
@brucebourget9508
@brucebourget9508 3 года назад
Again this anouther one of those parts chevy should be recalling as well as electric powersteering. I vote for the regular old style pump and rack design . At least you can still steer the car easily , if it failed. as long as your rolling even the slowest roll each an every one of us needs to complain . I dont like spending over a grand an then some for the fix
@nick6834
@nick6834 4 года назад
Dude, Thank you
@Ndesantis212
@Ndesantis212 3 года назад
Did this solve your steering clunk? I have the same noise, also a good amount of play in the wheel
@moondog67100
@moondog67100 3 года назад
yes this solved my problem 100 percent
@johnnyversaci7091
@johnnyversaci7091 4 года назад
Chevy blows should be a recall, dangerous as fuck and common
@nickimm12
@nickimm12 3 года назад
Yah tru also the fuel line should be recalled everywhere but according to chevy its vin specific ok how tf is my fuel leak exactly the same leake they recalled fuck chevy n I'm a die hard Chevy guy
@johnnyversaci7091
@johnnyversaci7091 3 года назад
@@nickimm12 for real that same cobalt I did the intermediate shaft on has a fuel leak somewhere in guessing it's the line like you're saying lol
@nickimm12
@nickimm12 3 года назад
Yah buddy its normally a leak near the rear of the car driver side follow the silver line from rear door back it by the rear tire / exhaust it's due to the heat blanket shield thing holds moisture best thing I'd say to buy is on ebay there nylon lines an it comes with new fuel filter n its direct replacement instead of metal lines the lines include both fuel line an vent line I payed 140 like ebay but seriously fuck metal lines an grab those it fixes whole line engine bay the whole way to the fuel filter
@skipkuchta1357
@skipkuchta1357 4 года назад
This is the second time I have changed my steering shaft on my g5 . The shaft is no problem. I have watched a few videos and no one shows the boot install as this is the most difficult phase. Any tips
@Engels_Family
@Engels_Family 3 года назад
Haha, this is this exact reason I am going through these videos. Seeing who has the best technique but so far, they seem to skip that step
@Nezdude87
@Nezdude87 2 года назад
@@Engels_Family any luck? I'm searching now 😂
@bhirmiz
@bhirmiz 3 года назад
Did you use a GM part or other after market brand also did the issue ever come back of owning the vehicle?
@jonathanryan2915
@jonathanryan2915 5 лет назад
I had to do the same exact thing to my 2001 Cavalier
@anthonydimanno5419
@anthonydimanno5419 3 года назад
Hi Mike will this also work for a 2006 Chevy impala have the same issue in the steering?
@MexicanNYAmerican
@MexicanNYAmerican 5 лет назад
Please tell me if this would be the same process for a 2009 Chevy Malibu LS 4cyl
@scratchwm11
@scratchwm11 4 года назад
Yep
@210king
@210king 2 года назад
Did you hav clunking over bumbs and when braking ?
@moondog67100
@moondog67100 2 года назад
Yes every time
@Sitota_muluneh
@Sitota_muluneh 2 года назад
hey an old steering wheel shaft can make steering wheel vibrat when breaking the car while u drive?
@moondog67100
@moondog67100 2 года назад
It can… but I would rule out alignment issues first
@johntaki2704
@johntaki2704 4 года назад
What are the torque specs???
@eyeonart6865
@eyeonart6865 4 года назад
How to replace steering column?
@wisamyousif450
@wisamyousif450 2 года назад
I have the same sound in my 2005 Chevy Malibu do I have to replace it?!
@moondog67100
@moondog67100 2 года назад
I would because if it breaks while you are driving then you loose your steering
@johnnyversaci7091
@johnnyversaci7091 4 года назад
Whered u get the part
@moondog67100
@moondog67100 4 года назад
amazon
@TheLCWorks
@TheLCWorks 5 лет назад
What was the size and length of that bolt you had to remove in the steering linkage? I have misplaced mine and I don't even know what I'm looking for...
@moondog67100
@moondog67100 5 лет назад
if my memory serves me correctly I believe it was 1 inch in length fine thread and 13 mm head
@TheLCWorks
@TheLCWorks 5 лет назад
Makes sense. It seems that mine has dematerialized drom existence, I've been up all night searching for this thing for reassembly, and not a trace.
@robobo2650
@robobo2650 2 года назад
Directions unclear. Mother stuck under front tire.
@johnnyversaci7091
@johnnyversaci7091 4 года назад
I feel like I've seen 40 year old cars with better looking steering shaft, the one I just took out is a little over 10..gm is such garbage, must be using the shittiest Chinese parts they can get their hands on. Plus my friends 2 year old Trax needs a new turbo apparently
Далее
Cobalt / G5  Intermediate Steering Shaft
16:44
Просмотров 106 тыс.
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
الذرة أنقذت حياتي🌽😱
00:27
Просмотров 14 млн
CV-AXLE REPLACEMENT (2005-2010 CHEVY COBALT)
3:56
Просмотров 80 тыс.
Chevy Cobalt Rattle in Steering
3:25
Просмотров 59 тыс.
Cobalt No Electric Power Steering, EPS
19:59
Просмотров 334 тыс.
Saturn Ion Intermediate Steering Shaft Replacement
4:43
Chevy Cobalt top half of steering column removal
8:34
How To Diagnose A Bad Inner Tie Rod
6:11
Просмотров 583 тыс.