2011-2013 Kia Sorento Driver's & Passenger's Front Door Panel Removal 2011 2012 2013 

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Good luck on your project! Please consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Good luck on your project

Happened to me, let me tell you it fcking sucked 😂😂😂

What happens if window gets stuck fully down and now window won't work at all? Does opening door panel allow you to manually "pull" the window back up? Gonna be rainy season soon! 😂

@@stephentang8536 In order to do that you would need to remove the window motor and then reinstall it to keep it up. Chances are the window motor is bad. I have a video showing how to remove the window motor. Good luck on your project!

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel!

@@TheInteriorAutoMechanic I did that before the video ended 😂 thanks again😊

Once you remove the door panel, you will see the metal panel that the window motor attaches to. From what I can tell, you must drill out the pop rivets all the way around the metal piece to access the innards of the door. It's a poor design in my opinion, but that's how it's made. If you do not have the tools to drill out the pop rivets safely, I would highly recommend taking it to a mechanic to have them do it. It will need to be put back together with pop rivets again. Please consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel. Good luck on your project!

Happy to help! Please consider liking the video and subscribing to the channel!

Hi Joshua, you will need to remove the door panel to give you as few headaches as possible when accessing your mirror. Technically you don't have to remove it but when it comes to removing/replacing the bolts it will make your life so much easier. The amount of time you will spend fighting the bolts out and back in could just be spent removing the panel and making the whole process easier. Here is my video on how to remove your door mirror ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ij9n5MkJdWM.html Please consider liking the videos and subscribing to the channel. If you have any other questions feel free to ask away. Good luck on your project!

Happy to help! Please consider liking the video and subscribing to the channel!

Happy to help! Yep it should be as simple as that! Please consider liking the video and subscribing to the channel!

Happy to help! Good luck on your project! Please consider liking the video and subscribing to the channel!

Happy to help! Please Consider liking the video and subscribing to the channel!

Happy to help! Please consider liking the video and subscribing to the channel!

Please consider liking the video and subscribing to the channel!

Mine did not have a bulb in it it was just a reflector.

You will most likely have to drill out the pop rivets that attach it to the door. I cannot say for certain because I never took ours completely apart. In my opinion it's a really bad design. I'd recommend taking it to a mechanic just to make sure you don't cause any damage.

Hi thanks for your question. Unfortunately the answer to your question is not going to be one that you're going to want to hear. More than likely you were door latch has frozen up. 9 times out of 10 you end up having to break the door panel to access the inside mechanisms of the door. You may get lucky and be able to remove the door panel without breaking it but most of the time it ends up getting broken. I would highly recommend taking it to a mechanic if you are not mechanically inclined just because this can be quite a task. Good luck on your project!

@@TheInteriorAutoMechanic that's what I was afraid of, and what I had been reading in some forums. Thanks for the heads up and confirming!

Unfortunately there is no real easy way to do this. You may have to end up breaking the door panel to get inside. I would recommend taking it to a mechanic and seeing what they can do so hopefully the door panel doesn't get destroyed unless absolutely necessary.

@@TheInteriorAutoMechanic thanks for the response, I was afraid of that answer but didn't see any other way, thanks

@@jeremylogsdon8596happy to help!

Your latch mechanism is jammed. You may have to take it to a mechanic and they can work on it. It may require removing the seat and attempting to remove the door panel, chances are it will break so be prepared for that. It's not the shops fault if it does, its just very tough to remove without breaking it without the door opening. Once they are in there they will have to gain access to the latch mechanism.

@@TheInteriorAutoMechanicCut into the door panel. I figured I try to minimize damage to front (dash near) screw and the back screw area to see if I can remove panel. Thank you.

@@rea8755 Happy to help!

The Motor and switch should be the same on a 2011. You can always contact your local dealership parts department to double check. Good luck on your project!

Was the fuse blown?

@@TheInteriorAutoMechanic no we fixed the fuse. It’s our window relay switch that needs to be fix

@@angelamackey5504 ok that's why I asked fuses do not typically go bad for no reason chances are the fuse was fine. Your relay should be located in the fuse box under the hood.

@@TheInteriorAutoMechanic where would it be exactly in the fuse box?

@@angelamackey5504 look inside the lid of the fuse box there should be a print out inside showing where it's at.

I will measure them tomorrow and let you know

@@TheInteriorAutoMechanic thankyou. I just bought a 2011 sorento . Still Fixing minor things. Any idea why steering controls may not be working?

@@mackla88 No problem at all happy to help! Could be as something as simple as a fuse or the controls on the wheel could be bad. Is the radio a stock unit?

@@TheInteriorAutoMechanic it came with an aftermarket android radio. "It is plug an play with existing sockets" however the buttons dont light up. Or have any function When i tried to set up the commands

@@mackla88 I just was able to measure the door speakers for you It looks like they are a 7.5" speaker and as far as your radio and your steering wheel controls most aftermarket radios will not work with the factory steering controls unless you buy an adapter for it to make it work.

@@GoodKarmaWellness please consider liking the video and subscribing to the channel!