Level your jeep with this How to Video!!!! Drop a comment below if you have any questions and dont forget to like, SUBSCRIBE and share with your frineds!!!!
Excellent video. I did this on my 2017 dodge durango gt. This kicked my butt. I had to take the sway bar off because it was interfering with the tie rods. Any ideas what I can do for a sway bar?
I have a 19 JGC and have this kit which I plan to do this spring. The locktite is a good idea but I would also remove the rotor(it's held on by a o-ring). The insructions show removing the knuckle. Every video I have seen of this is different but yours is helpfull. Thanks.
@@BSBASSIN I just pulled the wheel off and what I thought was plating is aluminium. The 2019's have a alloy lower control arm and knuckle. No hammering! I have to figure out how to get the tierod and upper balljoint out without damage. Mine is a Hemi powered Limited with the tow package/Nivomat shocks, the ass end is exactly 2 inches higher than the front (measured @ wheelwells) and I want it leveled. Thanks again for the video and any advice is always greatly appreciated.
Just did this job... My suggestion is to not reuse the locking nuts that are used in the upper control arm and tie rod. My other suggestion is to make sure you have a ball joint separator because you can only beat on your car so much before you accidently break things. If I would have had these things available it would have been much easier.
Awesome guide!! I hate to be a nuisance, but could you write up a list of all tools you'll need (maybe a "must-haves" list, and a "nice-to-haves" list?) to install this kit? Thanks!!!
Thanks for the detailed video. I'm thinking of doing this on my 2020 JGC. I was told that I would have to do a front wheel alignment after the install, do you agree?
I have someone else installed the leveling kit for me so now I want to replace the struts, do I have to do the trimming of the bolts like you did? Thank you in advance
I have a 2013 grand cherokee I put the leveling kit rc 2.5 in front but my shock absorbers have already decomposed, DO you think that i need to buy longer ones or with the originals it should me ok.?
I put on the RC 2.5" kit on my 2018 GC w/stock 18" wheels. Do you happen to remember what his tire size was he put on? Looks like he has 20" wheels. Thx
Great work man. If you don’t mind me asking, what did you charge to do this? I’m considering DIY versus paying a shop. Or, any shot you’re in Chicago area? I’d gladly go to you
@98th Meridian please watch video everything is in the video. I install leveling kits o. So many different suv, trucks, and even subaru cars I cannot remember everything from every one
