2012-2015 Honda Civic Mass Air Flow Sensor / MAF Cleaning 

Also with those boxes that you can take the top off can be easier ro remove if you pull the top first

It's an easy job. Removing the air filter box might be a little complicated.

Why did you replace the window switch control? It would make more sense to replace the lock switch control. Unless you meant you replaced the master control. You didn't mention which lock isn't working, so I'll assume all door locks are not working. I'll also assume it's power lock and not manual. If I ran into this problem first step I would do is check the fuse. If fuse is good, second step I would do is test the power wire going to the door lock actuator to see if there's power. Removing one of the actuators from the car and manually test it wouldn't be a bad idea. If it works, then you know it's just not getting either power or ground or both.

@@WelkingVue thanks brother I will do

Probably is your good at recognizing bird singing.

@@WelkingVue your video was very informative by the way

what's the minute and second into the video? I'll take a look.

@ 4:21 in the background the cable that connects to sensor.

@@bucome736 If you're talking about the GREEN clip, I disconnected it at about 42 second into the video. I use a long bent needle nose plier.