Тёмный

2012 Honda Odyssey Popping, Knocking or Creaking in the Front While Turning at Low Speeds 

Jeremy Gardner
Подписаться 169
Просмотров 121 тыс.
50% 1

This video is a how-to for fixing a popping or creaking sound from happening when turning at low speeds in a 2012 Honda Odyssey van. The Honda Service Bulletin is SB# 11-038.
The type of grease used was:
Shin-Etsu Grease (P/N: 08798-9013)
www.amazon.com/Genuine-Honda-...
TSB 11-038 - Popping, Knocking, or Creaking in the Front While Turning at Low Speeds
Applies To: 2011 Odyssey - ALL
2012 Odyssey - From VIN 5FNRL5H..CB000001 thru 5FNRL5H..CB088499
Service Bulletin PDF Link:
www.urvi.net/forumfiles/SB/A11...
techinfo.honda.com/Rjanisis/pu...

Авто/Мото

Опубликовано:

 

6 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@jeffreystarnes9500
@jeffreystarnes9500 6 лет назад
Mine was the sway bar link. After taking the tire off I could turn the wheel while touching the sway bar link and feel it pop. After changing with a Moog k750304 from Advance auto it’s fixed.
@YousefGhalib
@YousefGhalib 7 лет назад
Awesome video thank you very much! Own a 2012 odyssey with the same symptoms. It's already out of warranty but hopefully this would help with the squeaking noise from front suspension. I'll give it a try.
@jakubbobkowski8615
@jakubbobkowski8615 6 лет назад
Did this help with your problem?
@laurenwalker3437
@laurenwalker3437 6 лет назад
Dude, could you get on with it? Half your video is jacking your vehicle.
@FreedOrDieTrying
@FreedOrDieTrying 5 лет назад
Actually it's 85% of his video.
@morrisl7
@morrisl7 5 лет назад
welcome to youtube auto repair!
@cspc2570
@cspc2570 2 года назад
Yes we know what a jack does for Pete's sake
@milanimorales2645
@milanimorales2645 2 года назад
He's giving you time to get snacks and popcorn.
@jptrainor
@jptrainor Год назад
I had creaking, starting about a year ago, when turning at low speed and accelerating from a stop in a 2010 Odyssey (model year prior to that addressed by TSB 11-038). Greasing the top of the front struts resolved it. I'm surprised that the strut bump stops are in contact with the top of the strut body. Maybe that happens as the springs age and sag a bit? I used Honda Shin Etsu silicone grease, as described in TSB 11-038. Any silicone grease is likely just as good, but this was a good excuse to get myself a tube of Honda's famed Shin Etsu silicone grease. p.s. I didn't check the strut nuts, there was no need, but I have had one loosen on another car and it produced a distict clunk noise that was nothing like the creaking noise caused by bump stops contacting the strut damper body.
@rightyouareken7587
@rightyouareken7587 6 лет назад
Did this didn't work. Finally brought it in to Honda. The customer service guy knew exactly what it was and said that he sees a couple vans a month with the problem. The splines on the shaft of the steering column need to be greased. His opinion was that when it was assembled they put too little grease and it dries out. They fixed the issue and no more popping, creaking or pinging. They charged me $189 and took 3 hours. I'll call that a win. :)
@Galileo9.81
@Galileo9.81 5 лет назад
You mean the u-joint?
@Keashane
@Keashane 5 лет назад
Can u take a picture where exactly?
@peterredekop8624
@peterredekop8624 3 года назад
Doing this definitely doesn't take 3 hours, half hour max
@PermacultureLongboarder
@PermacultureLongboarder 2 года назад
@@peterredekop8624 he was at the dealership they probably had a line of cars in front of his. So far I've heard splines, cv, and the sway bar...
@michellepartin3686
@michellepartin3686 Год назад
Did your sound like this? I am going crazy trying to figure this out! ru-vid.com/group/PLn5IhraTCbZSbd6RztpjkoFJHt03DNU91
@tworth1953
@tworth1953 5 лет назад
Check the sway bar end links, mine go our once a year.
@johnpavon799
@johnpavon799 2 года назад
Great Video!
@ACDC4LIFE
@ACDC4LIFE 3 года назад
You may need to tighten the front center nut on struts also there’s been issues with them coming un-torqued & it causes a popping sound also my 2011 Odyssey EX was lose on the drivers side.
@meridianjumper
@meridianjumper 2 года назад
Good call. I have seen this center nut loosen up after replacement struts were installed and not properly torqued and verified.
@ACDC4LIFE
@ACDC4LIFE 2 года назад
@@meridianjumper update: mine were still stock just needed to be re-torqued all good now.
@romanrebisz4205
@romanrebisz4205 2 года назад
I look at my a is was lose too
@freddiebebop
@freddiebebop 6 лет назад
I knew someone that had one of these for 3 Days with less than a thousand miles on it and it started doing that. the dealer did a warranty replacement on the column and the new one started doing it after 6 months.
@salekiosk
@salekiosk 3 года назад
While accelerating here. Thanks! Other video on here said to take apart more stuff. Good to know this is easier and quick!! How about the back ones? Same?
@allthisfitsverywell4203
@allthisfitsverywell4203 2 года назад
Same
@meridianjumper
@meridianjumper 2 года назад
Same. This might not be the fix as there are multiple causes of this type of noise. This video was for the noise from the strut.
@Emperor_1971
@Emperor_1971 4 года назад
It’s also the steering knuckle by the gas pedals too you also need to grease that too here n there it’s annoying as the front struts are
@meridianjumper
@meridianjumper 2 года назад
Good call. I might do a follow up video for the steering knuckle too.
@temle7489
@temle7489 6 лет назад
Hi. Can I use lithium grease? or it has to be silicone base? I have the lithium grease at home. Thanks.
@meridianjumper
@meridianjumper 3 года назад
Genuine Honda 08798-9013 Silicone Grease is what I used in order to follow Honda instructions.
@NMSB38
@NMSB38 5 лет назад
Would help to hear the sound you are talking about. I'm trying to diagnose sounds coming from my 2012 Oddysey
@meridianjumper
@meridianjumper 5 лет назад
NMSB38 Its hard to get it on video or audio. It is a pop sound from that area of the van. It can be “felt” more than heard sometimes in the steering wheel.
@bigpoppapump4060
@bigpoppapump4060 4 года назад
I have a problem with my pilot I hear sow thing metal hitting metal ur it sounds like it's a piece of metal gangi v n when I hit a Lil rough street then I hear the clanking sound of metal on metal. All my feint suspension is brand new the away bar li ka r good only thing I didn't change out was the struts/shocks. The noise is coming from the front driver side
@michellepartin3686
@michellepartin3686 Год назад
Did you get the noise resolved? Did it sound like this?ru-vid.com/group/PLn5IhraTCbZSbd6RztpjkoFJHt03DNU91
@JuanMendoza-fk5se
@JuanMendoza-fk5se 5 лет назад
I have the same issue is this a permanent fix or how can fix this for good. Dealer has said this a normal thing but I high doubt it. I will use grease hopefully this will take care of the issue. I have a 2012 Honda Odyssey.
@meridianjumper
@meridianjumper 5 лет назад
Juan Mendoza I have only had to do this 2 times so far on the stock struts. I have about 15.000 miles before it will be time to change the struts out.
@edgarjimenez6345
@edgarjimenez6345 4 года назад
You should’ve shown putting on the grease. Also what kind of grease did you use?
@meridianjumper
@meridianjumper 3 года назад
Genuine Honda 08798-9013 Silicone Grease
@RodrinBird
@RodrinBird 7 лет назад
I live in an apartment building and my 2013 Odyssey, whenever going up in floors on the parking lot and I turn the wheel to the left, I hear a clunking noise coming from what seems to be the right front suspension. I thought it was the CV joint, but after seeing this, I'm not too sure now. This seems to be an easy fix since Honda wants to charge me $135 just to diagnose the noise. However, if I do bring the TSB to them, they should do it for free no?
@meridianjumper
@meridianjumper 7 лет назад
gowdaflow , I think it would be something to ask but all dealerships are different. Good luck, I hope this helped maybe get you in the right direction.
@RodrinBird
@RodrinBird 7 лет назад
Hello, just wanted to follow up on this issue. I read the SB 11-038 and was wondering if you re-torqued the self-locking nut on top damper as mentioned on the SB (only for '11 models I know) or did if you simply applied the grease on top of the damper body? Was the noise eliminated on your car after you did this? Let me know, Thanks.
@meridianjumper
@meridianjumper 6 лет назад
I did check the torque but it wasn't out of spec. I did the video for my 2012 van. Good catch.
@ElvisHunky317
@ElvisHunky317 6 лет назад
Strut mount or CV axle
@victorortega5158
@victorortega5158 3 года назад
Hey bro what Kane of grease do you use for that shock
@meridianjumper
@meridianjumper 3 года назад
Genuine Honda 08798-9013 Silicone Grease.
@craigconner3343
@craigconner3343 7 лет назад
How has your van been since you've performed this TSB 11-038? Did it fully resolve this issue? Thanks.
@meridianjumper
@meridianjumper 7 лет назад
So far I have not had any issues out of the noise since I did this Service Bulletin. I currently have roughly 52,000 miles on it. I did have the dealership fix the issue back a few years ago and then I did it again on my own (prompted this video). I think this will be something that we will have to do every so often. Its an easy process so I don't think it will be that big of a deal. I hope you have good luck with your repair.
@budgettech5526
@budgettech5526 4 года назад
@@meridianjumper what kind of grease did you use?
@meridianjumper
@meridianjumper 4 года назад
@@budgettech5526 I used the recommended grease in the service bulletin. Shin-Etsu Grease (P/N: 08798-9013). www.amazon.com/dp/B00GD49GTS/ref=cm_sw_em_r_mt_dp_U_8Aa0EbWXQBXKY
@budgettech5526
@budgettech5526 4 года назад
@@meridianjumper thanks for the reply
@andyflynn5783
@andyflynn5783 7 лет назад
Thank you for your video. May I ask what type of grease you used? Thanks
@meridianjumper
@meridianjumper 7 лет назад
I used some thermal wheel bearing grease for the time being but I returned to Honda and got the real stuff to that the Service Bulletin called for in case the noise comes back again.
@meridianjumper
@meridianjumper 3 года назад
Genuine Honda 08798-9013 Silicone Grease
@romanrebisz4205
@romanrebisz4205 2 года назад
Hey I just did that to my after market shocks wish I gat OEM ALL READY TO JUST Switch MOOG 12 odyssey SWITCH
@romanrebisz4205
@romanrebisz4205 2 года назад
Only work one day
@gregreitan3634
@gregreitan3634 2 года назад
What! The wheel pivots left and right on two points, the lower ball joint and the strut bearing at the top of the spring. Its either one or the other part making noise while turning the wheel. Normally the strut bearing is bad if popping noise while turning. Look up bad strut bearing video to see spring binding and popping because of bad bearing.
@meridianjumper
@meridianjumper 2 года назад
This might not be the fix as there are multiple causes of this type of noise. This video is for the noise from the strut which Honda released a service bulletin for.
@golfish8589
@golfish8589 Год назад
01 odyssey. At highway speed the van veers right when foot taken off accelerator. The steering wheel a actually ticks slightly left when this happens. Then the van corrects itself when accelerator is pressed again. And goes back to straight. There is tiny tie-rod play both sides. Tires have even wear. Van cluncks front left when accelerating after coming to a complete stop. Front and upper right motor mounts were just replaced. My nephew replaced both struts and springs about a month ago. Passrnger side vertical control arm bushing has some cracking. Van has 191,000 miles. All rubber suspension bushings were replaced at 135,000. Plus motor and tranny mounts.
@meridianjumper
@meridianjumper Год назад
Have you taken your van in for an alignment check?
@golfish8589
@golfish8589 Год назад
@@meridianjumper i plan to do a quick alignment check with strings. And rotate tires I did another check today. All bushings seem ok. I am getting a clunk from driver side inner tie-rod. Both inner tie-rods have movement. But very slight. The van gets squirrely when lifting of accelerator. It just doesn't feel like an out of alignment issue. I will be gone for a week. I will try to update later. Thanks for input
@golfish8589
@golfish8589 Год назад
So I just replaced both sides inner and outer tie-rods. And still have movement and clunking. It turns out the lower control arm horizontal bushing is clunking when grabbing left and right side of tire and torquinig it back and forth. I removed the bolt and rotated the lower control arm out. The bushing looks fine. But the bolt is very loose when slid back into the bushing. This is where all the play and knocking is coming from. Should there be a brass sleeve inside the bushing?
@meridianjumper
@meridianjumper Год назад
@@golfish8589 Generally speaking there should be some sort of metal tube that runs through the center of the rubber part of the bushing to give it some rigidity. Most of the time when you purchase something with a bushing, the metal tube/support should already be installed. However, I have seen it on fewer occasions where the manufacturer doesn't install that tube and relies on the customer/end user to push it through the rubber.
@golfish8589
@golfish8589 Год назад
@@meridianjumper There is a inner tube with id of real close to 9/16 inches a ok looking bolt with real close to .5 od. Two auto stores near me will have bushing for me to compare in the morning. I may stop by Ace Hardware and pick up a 9/16 bolt and see if it fits. The inner tube does not look worn
@yoda55555
@yoda55555 3 года назад
Thank you sir.
@meridianjumper
@meridianjumper 2 года назад
You're welcome. I am glad it worked for you.
@ElvisHunky317
@ElvisHunky317 6 лет назад
Strut mount
@joshvida
@joshvida 7 лет назад
Did this, didn't work. Replaced both struts, didn't work. At a loss now. Sounds like a creaky pirate ship when I'm turning at low speeds, and gets worse if I hit the gas slightly. I think it's the CV axles. We'll see....
@isaaclugo4635
@isaaclugo4635 7 лет назад
Joshua Vida it is the cv axels left and right they go bad.
@conniebhimireddyrealtor3018
@conniebhimireddyrealtor3018 7 лет назад
Thanks for posting this!!
@avsararas
@avsararas 7 лет назад
Lower ball joints.
@t4mboy123
@t4mboy123 6 лет назад
its the driveshaft
@Garagejunky09
@Garagejunky09 6 лет назад
@joshua Vida, was it the Axle?
@johnsteele8073
@johnsteele8073 2 года назад
Is this a joke? Like literally what's that supposed to do?
@shkodra09
@shkodra09 6 лет назад
all info is here . techinfo.honda.com/Rjanisis/pubs/SB/A11-038.PDF
@mariosantiago7671
@mariosantiago7671 5 лет назад
Good video but to volume to low
@meridianjumper
@meridianjumper 3 года назад
Sorry, crappy phone and was one of my first videos with it outside. Getting better gear for future videos.
@billhodges6547
@billhodges6547 4 года назад
Tried this, didn’t work for me. If your Ody sounds like an old pirate ship with creaking at low speed turns it’s the drive axels and wasn’t too bad to fix.
@jcontradiction
@jcontradiction 4 года назад
did you replace the drive axles? Turning my odyssey is clunking in low speed or parked.
@billhodges6547
@billhodges6547 4 года назад
jcontradiction yeah I replaced them over the weekend and it fixed the creaking and popping noises. Both drive axels looked perfectly fine and the boots were not bad.
@michellepartin3686
@michellepartin3686 Год назад
@@billhodges6547 did it sound like this? ru-vid.com/group/PLn5IhraTCbZSbd6RztpjkoFJHt03DNU91 I am 1500+ in chasing this sound. Today I had shocks and struts replaced...sound continues.
@freddiebebop
@freddiebebop 6 лет назад
issue is within the steering column typical foreign junk get rid of it before the trans explodes.
@ElvisHunky317
@ElvisHunky317 6 лет назад
Strut mount
Далее
Иран и Израиль. Вот и всё
19:43
Просмотров 1,5 млн
ТРУБОЧКА СКВОЗЬ НОС 😳
00:40
Просмотров 178 тыс.
Я тоже так могу
00:12
Просмотров 1,2 млн
2011 - 2017 Honda odyssey common issues
9:58
Просмотров 34 тыс.
Samsung Dishwasher Leak Fix (DW80F800UWS)
4:31
Просмотров 58 тыс.
2012 Honda Odyssey Spark Plug Replacement
11:05
Просмотров 98 тыс.
10 Common Problems Of A Honda Odyssey (2011 - 2020)
7:16
Odyssey Vibration Saga
36:43
Просмотров 70 тыс.
2004 Honda Odyssey front end noise
14:06
Просмотров 10 тыс.
honda make clunking noise at bump stop
5:30
Просмотров 168 тыс.
⫷ Clicking / Clunking While Turning, Solved! ⫸
2:48
Honda Odyssey noises
7:24
Просмотров 13 тыс.