Тёмный

2015-2021 Challenger Axial LED Side Marker Lights; Smoked Review & Install 

AmericanMuscle Dodge
Подписаться 23 тыс.
Просмотров 12 тыс.
50% 1

An excellent way to update the exterior styling of your 2015-2021 Dodge Challenger is with a pair of Axial Smoked LED Side Marker Lights. These Side Marker Lights feature a razor sharp LED strip that replaces the unsightly hot spot of the factory lights. These Axial Side Marker Lights not only look fantastic, but they are also much brighter than the weak stock incandescent lights for increased visibility day or night.
Quality Construction. Axial manufactures its Side Marker Lights with injected-molded ABS plastic housings for durability, and use smoked polycarbonate lenses for aggressive good looks. These Side Marker employee high output, red (rear) and amber (front) SMD LED strip lighting for super bright illumination. Axial ensures that its Side Marker Light housings are weather sealed to prevent dirt and moisture from harming the state of the art electronics found inside.
Plug-and-Play Installation. Axial designed its LED Side Marker Lights to be a direct plug and play upgrade for your Challenger's original factory lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of your new LED Side Markers and snap them in place of the old ones. It's that simple!muscle.am/304oS2E
0:00 - Review
1:51 - Tools Needed
2:10 - Install
Item CH3216
----------------------------------------------------------------
Follow American Muscle for all the latest Challenger and Charger Content:
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger or Charger: muscle.am/2ztDN5R

Авто/Мото

Опубликовано:

 

11 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@AmericanMuscleDodge
@AmericanMuscleDodge 2 года назад
Shop these Axial LED Marker Lights: muscle.am/304oS2E Subscribe for Daily Challenger and Charger Videos: muscle.am/2TXrfwf
@greenhornetkato4837
@greenhornetkato4837 2 года назад
Thanks for that 411 Man
@Kamal_AL-Hinai
@Kamal_AL-Hinai 2 года назад
Good to see you Justin!
@frederickgrayson5177
@frederickgrayson5177 Год назад
I got these in clear and I like them. One thing I do wish is that they were reflective like the stock units. I believe that having reflectors visible from the side is a DOT (federal) requirement.
@Kamal_AL-Hinai
@Kamal_AL-Hinai 2 года назад
I bought those and they are AMAZING!
@AmericanMuscleDodge
@AmericanMuscleDodge 2 года назад
Glad to hear you're happy with them! Thanks for watching! -Zach
@piggy_5.764
@piggy_5.764 2 года назад
I picked up the clear. These are great!!
@AmericanMuscleDodge
@AmericanMuscleDodge 2 года назад
Glad you like them! -Zach
@TEXASBOYZ-mu4yo
@TEXASBOYZ-mu4yo 2 года назад
Do they make them for the widebody?
@greenhornetkato4837
@greenhornetkato4837 2 года назад
So if you have a 2014 Challenger this product won't work?
@AmericanMuscleDodge
@AmericanMuscleDodge 2 года назад
These lights will not work on any Challenger older than 2015. They would not work on a 2014. -Zach
@biffbarely7045
@biffbarely7045 Год назад
I wish that was street legal, I'd love to do it for my car.
@ralphowens4510
@ralphowens4510 Год назад
What's not street legal about it?
@biffbarely7045
@biffbarely7045 Год назад
@@ralphowens4510 Federal law mandates you must have amber and red reflectors on all vehicles (to determine length & direction of the vehicle). You're probably safe as long as your car is running and your lights are on, but when you park it you risk citations for that lack of reflectors. Where I'm from cops are extremely petty about vehicle code.
@ralphowens4510
@ralphowens4510 Год назад
@@biffbarely7045 the law only states that if you have a light it must be functional, nothing about reflectors. Been driving a truck for 25 years and pretty much know the laws
@biffbarely7045
@biffbarely7045 Год назад
@@ralphowens4510 Not sure why, but my posts keeps getting deleted. They are required under Standard No. 108; Lamps, reflective devices, and associated equipment. See table III.
@kennyharp4125
@kennyharp4125 7 месяцев назад
@@ralphowens4510 wrong...NHTSA is amending the side marker requirements contained in the Federal Motor Vehicle Safety Standard (FMVSS) on lamps, reflective devices and associated equipment for vehicles 80 inches or more in width and less than 30 feet long. This final rule adopts the amendments proposed in the Notice of Proposed Rulemaking (NPRM), published on December 4, 2012. These amendments will restore the side marker photometry requirements for motor vehicles under thirty feet in length that were in place prior to the 2007 final rule that reorganized the standard. Restoration of the side marker requirements will have no negative impact on safety or function and will allow motor vehicle manufacturers to avoid unnecessary modifications to their side marker lamps with no added safety or functional benefit.
@averyhaferman3474
@averyhaferman3474 2 года назад
I couldn't fucking pop the lights out at all. I spent about 5 minutes with my god darm arm being squished under the hood fumling around pushing on it and fucking feeling around for some sort of release
@marcos45923
@marcos45923 2 года назад
Did you ever pop it out? I heard there's an easier way by going through the fender liner instead of the engine bay.
@averyhaferman3474
@averyhaferman3474 2 года назад
@@marcos45923 yeah I got the out a few days ago actually. Saw a forum online how to remove them. Really simple once you actually know 😅
@theannouncerdad
@theannouncerdad 2 года назад
@@marcos45923 Mine are on the way, I also saw you can go through the fender liner just like on a Charger. Seems much easier!
@marcos45923
@marcos45923 2 года назад
@@theannouncerdad Yeah, I had to go that route for the front driver side marker. The front driver side marker was easier to reach through the engine bay. Just have someone with thinner arms help you lol.
@theannouncerdad
@theannouncerdad 2 года назад
@@marcos45923 Do the rivets just pop out? Or do you need a tool? I have a Charger too and on that the fender liner rivets/snaps just popped out using a butter knife.
@that1guy668
@that1guy668 2 года назад
This is such a minimal feature. Lol id focus on the actual headlights and taillights
@that1guy668
@that1guy668 2 года назад
Oh my god it literally looks no different. What a waste of money. And if you want smoked markers. Just tint them?!?! I swear my tinted side markers look 10x better and it was probably around 7 dollars of tint material off amazon
@frederickgrayson5177
@frederickgrayson5177 Год назад
Tinting the factory side markers doesn't make them hugely brighter like these are. And tint doesn't extend the illumination over the full length of the unit.
@ralphowens4510
@ralphowens4510 Год назад
@@frederickgrayson5177 exactly, the stock lights only have 3 little bulbs in the middle where the ones I have feature 2 strips from front to rear.
@JustinsGarage
@JustinsGarage Год назад
These are what I consider a must have mod on any of the newer chargers and challengers. Tinting them looks like you tinted them, this mod really makes them stand out.
Далее
Does size matter? BEACH EDITION
00:32
Просмотров 5 млн
Cat Plays with Window Washer
00:22
Просмотров 2,1 млн
DODGE CHALLENGER RT OUTRUNS POLICE!  *GETS AWAY*
17:58
Просмотров 270 тыс.
Попрошайка на BMW😅 #shorts
0:42
Просмотров 4,9 млн
впихнул турбину в глушитель
1:00