2020 Chevy Silverado Tech Tip: How to Remove Panels From the Dashboard

Подписаться 17 тыс.

Просмотров 90 тыс.

50% 1

In this quick demo, we're showing how to remove the panels in the center of a 2020 Chevy Silverado dashboard. In this model, we had two blank panels next to the USB port and the cigarette lighter. We wanted to use one of the panels for a switch to control the strobe lights on this truck. Before installing a switch, we wanted to ensure that there wasn't anything behind the spot where we were going to drill, so we removed the panels. Watch the video to see how to remove the panels in the dashboard.
We hope this video helps you with your install! If it did, drop a comment, give us a like and make sure to subscribe to our channel!
For more information about our strobe lights or installation services, please visit our website at www.wickedwarnings.com. If you have any questions, please send us an email at info@wickedwarnings.com.
Contact Us:
info@wickedwarnings.com
www.wickedwarnings.com
Follow Wicked Warnings:
/ wickedwarnings
/ wickedwarnings
And remember to subscribe to our RU-vid Channel to see our latest builds!

Авто/Мото

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 108

@jarrettboswell822 Год назад

Awesome video. I popped my left one in and couldn’t figure out how to get it back into place.After watching the video I could just pop the USB out and snap the left one in from the back. Thanks for the insight!!

@WickedWarnings Год назад

Glad it helped!

@briankeller2640 Год назад

Good to know. My son was sitting in the middle seat and pushed his knee against it and it popped in. I have been trying to figure out how to get it back in place for 8 months now without taking the whole dash apart.

@egovan2191 Год назад

Exactly what happen to me lol

@rendonjmtb Год назад

How did you guys pop the usb ? My left one pup out also

@jonathanjones4590 11 месяцев назад

But how do you put it back in. The one that snaps in the back? So do I need to remove the whole panel to pop it back in?

@terryferguson4067 3 года назад

This was an EXCELLENT little piece of information. I am installing a brake controller in that very spot the "pushes back" instead of pulling out. Very timely and helpful.

@WickedWarnings 3 года назад

Glad it helped!

@OIE82 2 года назад

You probably thought about making a video after you had it all apart, still, watching it come apart would have been a big help. But you got me closer than I was before your video so thanks.

@WickedWarnings 2 года назад

Time is the battle we all fight. It's always more time i want.

@nacho8063 3 года назад

Thank you for making this video, this was a great help!!!

@WickedWarnings 3 года назад

Glad it was helpful!

@lordofsalmon Год назад

Thank you so much for making this video, it was exactly what I needed to know!

@WickedWarnings Год назад

Great! Glad it helped.

@virtigo31 Год назад

Swapping a jump seat for a center console soon so I'm looking up how to wire the splitter harness. I think this video will prove to be extremely helpful! Thank you

@WickedWarnings Год назад

Thanks for your comment! Keep watching for more great content.

@derrickowroten399 3 года назад

I m glad you provided me right that I can go back and add the options I didn't get in mine

@WickedWarnings 3 года назад

Glad we could help

@Nygmatic89 4 года назад

This helps, I’m gonna install a brake controller with a knob on that tab that pushes in so You probably saved me from scarring my plastic lol thanks for posting!!

@WickedWarnings 4 года назад

Glad I could help

@DDH516 3 года назад

exactly what I was looking for. Thank you

@WickedWarnings 3 года назад

Glad I could help!

@WhosAmI 3 года назад

Saved me from the same scars. Appreciate y’all so much!

@WickedWarnings 3 года назад

Our pleasure!

@TheChiefTEK 3 года назад

Loved the video. Very helpful. My right panel is blank with wiring. Going to add additional USB in that one.

@WickedWarnings 3 года назад

Glad it helped

@milesgreer4520 3 года назад

Thank you guys!!! I’m currently waiting for my 2020 Chevy custom trail boss to come in off the truck to the dealership! And I hate I’m missing features from the LT All Star. Have you guys noticed anything else that would be helpful about the infotainment or center console before I start toying around with it?? This video itself earned my subscribe!

@WickedWarnings 3 года назад

Thanks for the subscribe. any tech tip videos we have will be in the DIY folder under videos on our website wickedwarnings.com

@fixitdanner 2 года назад

Thank you so much I really appreciate you showing how!!!

@WickedWarnings 2 года назад

Glad it was helpful!

@lito311 2 года назад

This really helped me. Thanks for sharing!

@WickedWarnings 2 года назад

Glad it helped!

@lancedooley7558 3 года назад

Appreciate it man. I have a 21 gmc 2500 and i plan on doing a clean gmrs radio mount in between the two things on the side. I thought they came out like this. Good video man.

@WickedWarnings 3 года назад

Glad I could help

@jimm2442 Год назад

You helped me and I really appreciate it, Thank you!

@WickedWarnings Год назад

Great! Glad this helped!

@seanconlin8712 4 года назад

Thanks for the great tip...I'm currently looking for a new vehicle and plan on mounting warning lights on it this will help thank you George

@WickedWarnings 4 года назад

Glad it helped

@mtower235 3 года назад

Awesome you saved me some aggravation on my 2021 trail boss I’m putting in a brake controller

@WickedWarnings 3 года назад

Great to hear!

@jaylukan2108 Год назад

Excellent information in this video.

@WickedWarnings Год назад

Thanks for your comment. Keep watching for more great content!

@danaadams1492 3 года назад

Thanks so much. Very helpful!

@WickedWarnings 3 года назад

Glad it was helpful!

@curtispoehlein2766 3 года назад

Helped for sure! Thanks!

@WickedWarnings 3 года назад

Glad it helped!

@brodienation 4 года назад

Definitely helped. About to add a 110 to that blank spot on the right

@WickedWarnings 4 года назад

Glad we could help

@jeremysimpson1432 2 года назад

How was the outcome? I want to do the same.

@bizarwick 4 года назад

Was actually very helpful

@WickedWarnings 4 года назад

Great, glad you liked it.

@gpiper123 Год назад

Thanks for the tip about the one panel needing to be pushed in.

@WickedWarnings Год назад

Thanks for your comment. Keep watching for more great content!

@christophercuenca9145 5 месяцев назад

It helped me thank u.

@bobnardo26 4 года назад

Thanks for the video, exactly what I was looking for cuz Im considering doing so customization. Do you remember if the wires to the blank panels were hot?

@WickedWarnings 4 года назад

No, sorry

@blessedup3352 4 года назад

This definitely help me, I have a lower trim model and I needed to see the wiring so I can attempt to upgrade some of the hardware I didn’t get, usb C, 110 Volt, so thank bro...

@WickedWarnings 4 года назад

Glad I could help

@carreonsgv 4 года назад

Definitely did help out👍

@WickedWarnings 4 года назад

Glad we could help!

@wadehausman100 Год назад

Did help thank you sir

@WickedWarnings Год назад

Great to hear!

@deltonrushing3003 4 года назад

George, could you make a video on removing the sunvisor clips of a 2014+ Chevy/GMC Silverado/Tahoe/Sierra/Yukon?

@WickedWarnings 4 года назад

We will make a note of the request.

@Mike-re7sq 2 года назад

Thank you 🙌🙌

@WickedWarnings 2 года назад

Thanks for commenting, keep watching for more great content.

@famous6652 2 года назад

Thank you!!!!!

@WickedWarnings 2 года назад

You're welcome!

@jakeraymer5179 4 года назад

Supper helpful!!! I have a 2020 Gmc and there isnt any videos like that yet.

@WickedWarnings 4 года назад

Great to hear!

@ferndogg4427 3 года назад

Ik, I wanna connect a 110v outlet to mines

@shereebrown3232 Год назад

Do you have. Video of you popping them back in?

@WickedWarnings Год назад

No sorry.

@efrenvargas3506 Год назад

Thanks it help me

@WickedWarnings Год назад

Great to hear!

@WethepeopleFreedom76 3 года назад

Could you upgrade to 110v outlet? I thought there was an additional switch to turn the outlet on and off with the trucks equipped with the outlet from the factory

@WickedWarnings 3 года назад

Not sure, sorry

@IamMugs 3 года назад

You're in the wrong profession dude.. you need to be on a radio station lol

@WickedWarnings 2 года назад

Thanks for commenting, keep watching for more great content. Id love to pursue that...LOL

@patriciamcdonaldfortier170 2 года назад

Hi Can I purchase and change out my USB that is not working properly on my 20 Silverado ? Changed out generic cords, etc. I bought a $25 Samsung cord in case it was generic cords. The only conclusion is that it's the port itself that has issues. Suggestions on where to get a compatible USB port ? This is not in my wheelhouse; my brother can help me install it. Thanks in advance.

@WickedWarnings 2 года назад

YES YOU CAN....either order a new port from dealer or an aftermarket port on amazon and wire in. Its easy to swap.

@justisheitz1038 2 года назад

So I’m struggling to put the left panel back in how am I supposed to put this in exactly my nalgene flew forward Bc someone decided to slam on the breaks to take a right turn this making me hit my breaks none of the tabs are broken it’s just I can figure out how to put it back in place

@WickedWarnings 2 года назад

It snaps in from behind. You need ot take the other panels OUT then use a tool to snap that panel in by pressing BEHIND it. For EVERYONE who keeps commenting about this......that is as easy as it was.

@bionicbob1285 11 месяцев назад

How did you put the LEFT piece back in. if it pushes in. you would have to install it from inside the dash. How do you push it back out forward?

@WickedWarnings 11 месяцев назад

It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.

@jenniffersearcy8692 10 месяцев назад

If i was trying to get the one pannel that pushes in back in place would i need to open another panel beside it and push it from the inside?

@WickedWarnings 10 месяцев назад

Yes, it snaps in from behind. So you would open another one and then use a tool to snap that panel in by pressing behind it.

@jefferypeterman4603 Год назад

Thanks

@WickedWarnings Год назад

👍

@juniorv.3049 Год назад

I almost broke the button that pushes back to be removed. Thanks!

@WickedWarnings Год назад

Glad this helped!

@itsashietshow9476 10 месяцев назад

How do you put the left one back in if it's out like shown on video?

@WickedWarnings 10 месяцев назад

It snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.

@jimwright3870 Год назад

how do I get the panel on the left back in place

@WickedWarnings Год назад

It snaps in from behind. You need to take the other panels OUT then use a tool to snap that panel in by pressing BEHIND it.

@briandeveney305 9 месяцев назад

The one on the left that snaps in the back I accidentally pushed in. How can I reset it?

@WickedWarnings 9 месяцев назад

It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.

@dannymay4687 Год назад

The piece you have to push in, is there a way to get it clipped back into place without taking apart the dash?

@WickedWarnings Год назад

It snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.

@valerierodriguez2750 Год назад

How do you put the far left one back?

@WickedWarnings Год назад

It snaps in from behind. You need to take the other panels OUT then use a tool to snap that panel in by pressing behind it.

@DanielMartinez-xf4wv 10 месяцев назад

0:33 on that blank panel, do you know how to put it back?

@WickedWarnings 10 месяцев назад

The right one snaps in from the front so you can just push it back into place. The left one snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.

@Tom-ic7hw 9 месяцев назад

accidentally pushed the backward one in how do I get it back in place

@WickedWarnings 9 месяцев назад

It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.

@davidedenfield1166 2 месяца назад

soo I've read your reply to 104 questions. and it seems that you need to pop out another panel, use a tool and snap the left panel in from the back? is this correct? lol jk jk. good video you saved me from a full disassemble.

@WickedWarnings 2 месяца назад

LOL thanks for checking the comments and glad this helped!