2022+ WRX Wheel Stud Replacement + Wheel Spacers

Подписаться 54 тыс.

Просмотров 17 тыс.

50% 1

‪@aeroflowdynamics‬ Wheel Spacers: www.aeroflowdynamics.com/coll...
Use code KEVINVO for 5% off your Aeroflow Dynamics order!
Wheel Stud Installer: amzn.to/3DEkRlX
ARP Wheel Studs: amzn.to/43s8vHS
Last time we worked on the WRX, we ran into the issue of not being able to remove the wheel locks. We're getting them off today and we're replacing them with some ARP wheel studs so I don't have to worry about that issue. Once we get the new studs installed we can get the Aeroflow Dynamics Wheel Spacers installed and see how they look!
Driven Media Carbon Fiber & Overlays:
► www.driven.media/shop
22+ WRX
►www.driven.media/shop/22-suba...
GR86/BRZ
►www.driven.media/shop/22-toyo...
Discounts
Dress Up Bolts
► Use code KV23 to get 10% off on www.dressupbolts.com
3D Floor Mats
► Use code "KEVIN3D10" to get $10 off on 3dmatsusa.com/?You...
Import Bible
► Use code KV23 to get 10% off on importbible.com/?aff_id=kev
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Bride Stradia III Seats
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Front Lower Control Arms
Cusco Adjustable Rear Lower Control Arms
Cusco Adjustable Rear Toe Arms
Cusco Rear Trailing Arms
Cusco Rear Upper Lateral Control Arms
ARP Extended Wheel Studs
5mm Wheel Spacers (Front)
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune w/ Graham from Boosted Performance Tuning
Compressive Tuning Carbon Fiber Engine & Fusebox Cover
DressUpBolts Stage 1 Engine Bay Titanium Hardware Kit
Perrin CAI
Verus Engineering AOS
Verus Engineering Oil, Coolant, Washer Fluid, Brake Fluid Caps, and Cam Sensor Covers
Tomei Type D Dual Exit Catback Exhaust
Circuit Demon Custom Headlights
JDM Clear Sidemarkers
Twins Carbon CF Center Console, AC Vent, Steering Wheel Covers
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemicsound.com/7tnnmu
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Авто/Мото

Опубликовано:

18 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@swoodworth8553 11 месяцев назад

Mr. Vo, you are truly the great explainer. I am an Abuelo who has a 22 WRX Limited in white and love it..the grandkid loves it even more, I taught him how to drive a stick on this car. Keep up the wonderful work you do…thanx for sharing.

@KevinVo 11 месяцев назад

Glad to hear you're enjoying the car, thanks for watching!!

@KKiguchi 11 месяцев назад

These frequent and helpful uploads really boost my week

@KevinVo 11 месяцев назад

Glad you're enjoying them!

@dougie041991 11 месяцев назад

I agree! One of the fee channels I look forward to!

@dexstrat9229 11 месяцев назад

When taking wheel lugs off with a tire iron my dad taught me to literally stand on top of the edge of the tire iron in order to get enough force to undo it. Works like a charm

@KevinVo 11 месяцев назад

Done that before but not on my cars haha I'd be worried the nut would suddenly loosen very quickly and the tire iron would fly off into the car or my shin.

@ehern87 3 месяца назад

They always tend to torque the s out of these things at shops. Another thing, is the angle of the wrench/iron whatever. Usually you can place it in a way that allows you to lean back and push with your legs giving you way more power

@Menace_sti 11 месяцев назад

Milwaukee all day. Time to look at your tool set sir. Itll take off even a axle nut with ease. But awesome video kev can wait for more wrx content

@joestasi8329 11 месяцев назад

Flush fitment right there, nice job it looks much better!

@jptothetree 11 месяцев назад

ARP studs are my favorite invisible upgrade that I've done to my 2020 WRX! They are awesome. Highly recommend them

@hotwheeleveryday 11 месяцев назад

Nice work Kevin. Watching you work and listening to your explanations gives me the confidence to try some of these things myself. 2022 BRZ Limited Automatic

@ApolloWRX23 9 месяцев назад

Very nice video and I love how the wheels sit!

@NicolasCageIsActuallyARobot 9 месяцев назад

Do you know the torque specs for the front and rear caliper carrier bolts?

@rickyr3268 11 месяцев назад

Another quality upload 🤌🏾

@KevinVo 11 месяцев назад

I try I try!

@Tomas.X 6 месяцев назад

Great video. Hoped to see a walkthrough on the VB ahead of doing this next spring. I assumed everyhing would be pretty straightforward - always nice confirming, though! The wheel studs snapping in my experience is from cross-threading when my cars have been in the shop. From little shops to the dealer (and I really like mine) at some point everywhere any car of mine has gone I've had a crossthreaded nut. Not all resulted in breaks...most were just high-resistance and tiny bits of metal falling out. Nuts go on with fingers and torque wrenches, nothing else. Also: everyone should own a 1.25 tap/die and clean up the stud threads and wheel nuts every so often. Again...cleaning. Not saying re-thread! If it's that bad, replace it. Here in the snowbelt it's especially important.

@stevef3521 11 месяцев назад

Nice work! Mechanics have said no wheel spacers on my FR-S as they’re bad on the stock suspension. Advice/opinions on spacers for stock wheels and suspension to make it flush?

@TimothySmith 11 месяцев назад

Looks really good for the cost. What aftermarket specs would I need to achieve the same look without spacers? I don’t know the stock offset + spacer difference. I’d like to stick with 17’s because I want rally golds for a more rugged look. Just don’t know what wheel width + offset I’d need for this flush look!

@nodrogkam 11 месяцев назад

I am so impressed the key and the lock nuts did not strip with that much torque placed on em. You kept a pretty good angle on it so kudos to you. If that's how it came from the factory, I would be mind blown.

@KevinVo 11 месяцев назад

I honestly was convinced they wouldn't come off without some sort of issue.

@nodrogkam 11 месяцев назад

@@KevinVo anyone who has suffered from the same or similar issue likely thought you were 'done for' as well....lol. good stuff though!

@FujiboHeavy 11 месяцев назад

Nice man! Def invest in 1/2 breaker bar! Perfect to break loose those over tightened nuts 😅

@ScottWakeman119 11 месяцев назад

Looking good - great video! Super helpful! You can use an impact to loosen lug nuts. Just need to make sure you're not using chrome sockets, those can shatter badly. The black sockets are meant to be heat treated and may crack, but won't shatter like a grenade :-) Just shouldn't use an impact to tighten them, or if you do only to the point they make contact with the wheel. From there use a torque wrench.

@KevinVo 11 месяцев назад

Lug nuts, yes, but I don't think wheel locks take well to being impacted as I've seen the face of them break off. As for impact sockets, I actually have impact sockets I just quickly grabbed that one.

@sangmollinder3543 9 месяцев назад

very good job !

@astromanofficial 11 месяцев назад

outstanding

@jefferys9593 10 месяцев назад

Yep notice the difference , looks a lot better.

@adamshomo3354 11 месяцев назад

No flack from me for not ripping on the oem locking nuts. You bought a brand new car and had no replacement ready for the lock nuts, I’d have been sketched out too until I had a set of replacement studs to back me up. Digging the spacers on there, wasn’t sure how aeroflows spacers held up compared to Perrin or isc spacers. Hopefully they hold on for you. Great video as always. 🙏🏻

@KevinVo 11 месяцев назад

Thanks for watching!!

@fearlessknight1343 11 месяцев назад

Was there any difference in the stock vs aftermarket wheel studs that required you to install the spacers? or would the factory studs work fine? Love the content! Keep it coming. New to modding :)

@KevinVo 11 месяцев назад

Not required for the spacers. I just replaced them for peace of mind.

@Gregsheppo66 6 месяцев назад

If your wheel nuts are too tight to loosen by hand use your foot & step on the wheel brace. Works a charm. 👍 Here in Australia wheel spacers are illegal for some strange reason.

@letsgobrandon7799 11 дней назад

I'm doing this next weekend Kevin is an alignment in store for me after this modification?

@ShotEmUpGood 2 месяца назад

Hey Kevin, I'm curious about the sacrificial lug nut you used to install the studs. Is it an open lug nut?

@midiwrx 11 месяцев назад

How far will you go with the build? Will you do bbk and coils? Man I Love the content. I’m a New fan, definitely better explanation and so thorough and in depth. So easy to follow and your camera work is seriously the best. Some videos out there are all over the place, feels like watching cloverfield haha I loved how you stabilised the camera before you showed the offset difference. So detailed bro. Keep it up.

@KevinVo 11 месяцев назад

Glad you're enjoying the videos!! This will just be a clean daily driver. Trying to keep it relatable to most of my viewers.

@stinkydognuts 11 месяцев назад

hey kevin i was looking to buy the drl side markers from AEMtuners from one of your older videos but the link doesn’t work… is there any way they are still purchasable ?

@C3R3ALKILLA 10 месяцев назад

Great vid! Can you let me know what lift you were using in the video? Thanks.

@KevinVo 10 месяцев назад

Thanks! Glad you figured it out!

@chocOneOOne Месяц назад

That was a lot of ooga ooga's to get those off

@PsychoCPU 11 месяцев назад

Did the spacers have any impact on handling characteristics? Tight turn in, like in a parking lot? I wanna do spacers on my '21 but was a little on the fence about how it would impact it.

@KevinVo 11 месяцев назад

It'll be negligible.

@mig1nc 10 месяцев назад

What jacks are those?

@ayeits_jp 11 месяцев назад

We live to learn. The only way we learn is by making mistakes 👍🏻

@jesusflo34 11 месяцев назад

So I have some 20MM wheel spacers I wanted to install anda buddy told me I need to trim wheel studs. I didnt think I did, any input?

@WRX_Panda 11 месяцев назад

@kevinVo what do you think about the stock breaks? I personally think they are awful. STI brembo kit upgrade or wait for Brembo kit to be available?

@KevinVo 11 месяцев назад

I would suggest upgrading pads and fluid first to see how that feels before going to a BBK.

@troycheesman6923 11 месяцев назад

I like it very nice 😮

@albert328 11 месяцев назад

these are cool but isn't it the usual practice to get a set of 9.5" +38? (I went with Advan RG4 9.5" +45)

@rogerkingdev 11 месяцев назад

Hi! My buddy broke a a wheel stud on his brand new impreza when he went to change out his wheels! Unrelated question, Im looking to get some quick jacks my self. Does your driveway have a slight slope?

@KevinVo 11 месяцев назад

It has a slight slope to the side but that's about it.

@JohnnyBlaze710 11 месяцев назад

What made you choose that type of wheel spacer compared to the traditional ones you mentioned?

@KevinVo 11 месяцев назад

Ease of use. If I used the traditional ones I would need to install the extended wheel studs and then get open ended lug nuts.

@jaypee024 2 месяца назад

Where did you get that lift? I need haha

@chrisyoung2188 4 месяца назад

Does it sling mud on the car ?

@iain1969 2 месяца назад

I don't think you were 'wrong'. Those wheel nuts should never have required that much torque to loosen. I was waiting for the crack as the stud broke!

@NellysaintsSROP 11 месяцев назад

I use the jack handle as a breaker bar extension. 2-1 saves us money and now the breaker bar is compact easy to store.

@kenvasquez3604 11 месяцев назад

Idk what they are called but are those air powered jack worth it ? Also where do you suggest I get one?

@KevinVo 11 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DJqrO2KuIa4.html

@leftyo9589 11 месяцев назад

you know the lot clown at the dealership they had put those locking nuts on just borrowed an impact from one of the wrenches, and just let it buck.

@Panzerlang 10 месяцев назад

You used a wratchet-wrench for that? FMG.

@jasmy-canada 11 месяцев назад

Yo Kevin! Are you going to build the Toyota behind the WRX also ? Would love some overland stuff 😅

@KevinVo 11 месяцев назад

It's only 2wd 😅

@amoni1959 11 месяцев назад

Will hammering the studs out like that damage the wheel bearings?

@KevinVo 11 месяцев назад

The bearings see much more abuse than a couple pings with a hammer haha if you're really worried about it I'm sure there's a specific tool to do it.

@amoni1959 11 месяцев назад

@@KevinVo fuck it. I been wanting to upgrade my studs too. Hammer it is. 👍🏾

@NVRRVN 11 месяцев назад

It needs some Volk bronze wheels 😅

@108Hawke 11 месяцев назад

I wouldn't say you were wrong. Logic would say if you could remove all the other lugs nuts by hand then the lock nuts should also be able to be removed by hand. If you had to use a big breaker bar on only the lock nuts then they were over torqued.

@KevinVo 11 месяцев назад

Can't argue with you there!

@swoodworth8553 11 месяцев назад

Forgot to ask my question. My tire guy told me he will not even put tires on a car with wheel spacers, claims they are dangerous… what are your thoughts?

@KevinVo 11 месяцев назад

Properly installed spacers are not dangerous. They're actually very widely used even in the racing community.

@janglyechoes 11 месяцев назад

Never knew Argenby is a GR86 Enthusiast.

@KevinVo 11 месяцев назад

🤣🤣🤣

@SHiFTDI3S3L 11 месяцев назад

While it is an option, I normally skip the whole wheel spacer thing and save up straight to the wheels with the correct offset. It's just more money to spend on a temporary thing that you could just spend toward the permanent thing. It also adds another point of failure, which I'm also not comfortable with. Building a car requires patience. Sometimes you just have to stay stock until enough money comes in to make sure you don't spend extra money on half measures.

@KevinVo 11 месяцев назад

What if people just like the stock wheels?😢

@SHiFTDI3S3L 11 месяцев назад

@@KevinVo I've never encountered someone who's told me "nah the stock ones are better". 😆

@conspiracy8119 11 месяцев назад

Probably this video was not meant for you..😢

@SHiFTDI3S3L 11 месяцев назад

@@conspiracy8119 Still watched it.

@t3ap0t_wr3x 11 месяцев назад

Idiot? Not at all. My dad watched me struggle for almost an hour once before handing me the jack handle to put on the breaker bar. We never stop learning as long as our minds are willing.

@Wrx.Saddie 11 месяцев назад

They put more torque on his wheel lock than the car produces 😂

@KevinVo 11 месяцев назад

LOLOLOL

@fernandoquiceno 4 месяца назад

I think you’re very trusting leaving your car on your Jack over night.

@KevinVo 4 месяца назад

You worried of people taking parts off?

@fernandoquiceno 4 месяца назад

@@KevinVo More concerned of the $1500 Jack missing or even the car itself. Someone out there will always like your stuff more. Don’t wanna give an opportunity.

@AFwitchdoctor 11 месяцев назад

Your not dumb. Shit like this happens. Glad you didn't snap a bolt!

@KevinVo 11 месяцев назад

Me too! What a relief haha

@TheRisenOne777 10 месяцев назад

You just needed a stronger impact and it would have gotten them off easy👌🏼

@bknoxx 2 месяца назад

no one suggested heat lol.,.

@seanphillips9272 11 месяцев назад

No wheel nut should take that much effort. If it does then Subaru need to look into their factory torque settings! 110Nm is perfect. 130Nm max. Any more than that is NG!

@mrch33sehed93 11 месяцев назад

Note to self: Check for wheel locks if buying new WRX 🧐👍 Also, are you curious what Subaru is gonna announce at Subiefest regarding the BRZ or do you already know?

@KevinVo 11 месяцев назад

It's likely going to be a TS or some special edition that doesn't really change too much. I'd expect a performance package similar to the GR86 Trueno Edition but with different aesthetic pieces obviously.

@mrch33sehed93 11 месяцев назад

@KevinVo makes sense. Id like to see em do a TS for the VB chassis or the Impreza RS seeing as there's no current STI

@lukesantobuono8283 11 месяцев назад

lol get a Milwaukee and it'll come off

@jonuldrick 7 месяцев назад

This pains me seeing a torque wrench being used as a breaker bar. I was hoping I was wrong on the last video I just watched.

@KevinVo 7 месяцев назад

It's not a torque wrench...

@jeffrey3498 11 месяцев назад

I've found that the smarter a person is, the less common sense they possess, which means they weren't really that smart in the first place. 😂👍

@KevinVo 11 месяцев назад

🤣🤣🤣

@andrewharris7868 11 месяцев назад

You're not an idiot. What's the chances somebody's going to have a breaker bar if they catch a flat on the side of the road.. 3:18

@KevinVo 11 месяцев назад

I definitely don't keep one in my car haha

@andrewharris7868 11 месяцев назад

@@KevinVo we need a PSA for new WRX owners 😂

@DKarGarage 9 месяцев назад

Thats lil too tight

@anthonyrobitaille8963 11 месяцев назад

Your lug nut where way overtorqued. This impact gun is good for a least 250 lbs of torque and you where struggling with your long bar...

@JasonNugent 11 месяцев назад

No hate from me at all, dude. There was no reason for those wheel locks to be on that tight.

@240sxdriver 11 месяцев назад

Only thing I can give you crap for is using hand tool sockets on an impact. I know MOST people are going to say it's fine but after having friends go to the ER from the socket exploding, I can only suggest using proper impact sockets. Thankfully they aren't too expensive unlike a hospital bill! Sunex sockets from amazon have treated me well and fit snug to the fasteners to help avoid major marring.

@KevinVo 11 месяцев назад

I actually do have impact sockets haha but the 19mm impact didn't go far enough on the lug nut I was using 😅

@2023startingCA 11 месяцев назад

the price of AFD's spacer is toooo expensive...

@wrxrcr1 11 месяцев назад

Those studs should be replaced in the event somebody thought that they could reuse them. I know you replaced your studs but for anyone watching.They are way past the yield point and entered the plastic phase.

@kchan333 11 месяцев назад

Ain't nothing happening with that tiny impact...lol

@KevinVo 11 месяцев назад

If they weren't over-torqued it'd take them off! haha

@kchan333 11 месяцев назад

@@KevinVo need an uga dugga... not 0.25 uga dugga. lol

@SonNguyen-mk2wq 11 месяцев назад

Shouldn't need that much leverage. Imagine getting a flat on the highway. You're supposed to be able to change your tires with a basic tire iron, not a pole vault.

@KevinVo 11 месяцев назад

Yeah no way those were coming off with the tire iron haha

@kaboom8979 11 месяцев назад

hehe first!

@KevinVo 11 месяцев назад

🎁

@kaboom8979 11 месяцев назад

@@KevinVo 😊

@dougie041991 11 месяцев назад

Kevin, you are weak and need to hit the gym! 😅 jk your channel is always full of valuable information. 1) the spacers definitely help fill out those wheel wells. 2) you should be a teacher or instructor, if you aren't already. Like maybe be a mechanic instructor. And maybe for any kind of boxer engine since your channel centers around them. Unless you consider yourself an all around mechanic

@KevinVo 11 месяцев назад

I don't have the patience to teach people! Haha jk I'm teaching through my RU-vid 🤣

@DCportraits 11 месяцев назад

You're not an idiot or wrong or weak, the torque spec should be no more than 90 ft/lbs. Dealerships just spray and pray when it comes to impacting your nuts back on. I've run into aluminum wheels that are nearly fused to hubs because dealerships and mechanics just blast the nuts on and call it a day and then your weak wristed friends are stuck on the side of a road because they can't get their wheels off their car to fix a flat. guuuuhhhhhhhhhhh

@KevinVo 11 месяцев назад

Yeah, I'd say there was an excess amount of ugga duggas used.

@aerowick4643 11 месяцев назад

Nah you didn't do anything wrong. Those wheel locks shouldn't be on that tight

@viraj1313 11 месяцев назад

All the crap in the world!

@KevinVo 11 месяцев назад

Not gonna lie, this confused me at first 🤣

@viraj1313 11 месяцев назад

@@KevinVo Dad jokes got you haha, I love that you show even the failures! We all have them and this is a great reminder for me, still feeling like an amateur from time to time :)