2UZ Swap Tacoma Long Term Update, Fuel Mileage and Weight

Подписаться 79 тыс.

Просмотров 80 тыс.

50% 1

This video is sponsored by Craftsman and the Craftsman Overdrive Tool Set #ad
Did I ruin this Tacoma by swapping the 2Uz into it? The short answer is NO!! This truck is so much fun to drive, but a lot of you have asked a pile of specific questions about it. So here is a quick update video update.
I have been daily driving my 2UZ Swapped Tacoma for a few months now, and it is AMAZING. Having the V8 under the hood with the 5 speed manual trans is a perfect combo. I do need to make a couple changes to the truck to make it perfect, but before I jump into those jobs I wanted to drop in here and leave you with an update and answers to the most common questions I get about the truck.
Get Your Stickers Here
bigtiregarage.myshopify.com/
Coffee Cups Here
big-tire-garage.creator-sprin...
Best Wheel Base for Off Road Rig
• Best Wheel Base for Of...
What Happened to the Suzuki Samurai
• What Happened to the S...
My Favorite Builders
• What happened to the 6...
Learning CNC Plasma
• Learning CNC Plasma, W...
Where to get the goods:
Welders: esab.com/us/nam_en/
Plasma Table: www.fastcutcnc.com/
Fab Files: www.diyoffroad.com/
#fabrication #offroad #vlog
For merch visit www.bigtiregarage.com
Follow me on social
IG: / ianfrombigtiregarage
FB: / iansbigtiregarage
DISCLAIMER: Due to factors out of the control of the Big Tire Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Big Tire Garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Big Tire Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Big Tire Garage

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 251

@spatton7875 8 месяцев назад

So I owned an 06' tacoma and an 04' 4runner with the 4.7 at the same time and I have come to the conclusion that Toyota absolutely dropped the ball by not building this truck. Had they made the 2uz available in the tacoma they would have absolutely owned the small truck market. More so than they already did. They would not have been able to make them fast enough. I loved me tacoma but I could get better mileage and far better drivability in the 4runner.

@freecanadaplease 8 месяцев назад

This is why I own 1st gen tundras

@humpday2267 День назад

I also have a first gen tundra. Currently in the process of 4wd swapping it with a j shift t case.

@mschulz55 8 месяцев назад

Love the 4.7 swap always thought it would be a sensible swap in an FJ. 18 mpg seems very good I’d be happy

@mitchellsnider4198 28 дней назад

Very comparable to the mileage I get in my V6 manual FJ, so I agree!

@petepeters5630 4 месяца назад

My inspiration! I’ve had a 2007 small cab Taco for a few years and wanted more engine. Bought a 2004 Tundra last week for $1,300 and the project Begins!! Thanks for all the great info.

@pyro323 8 месяцев назад

Bro that Toyota sounds amazing! I watched your show on Spike TV and it's good to see you're still doing the same stuff!

@BigTireGarage 8 месяцев назад

More to come!

@RayRay-pg3fx 8 месяцев назад

Ian, Thank you for stopping by the Power Probe booth at SEMA. It was great to hear how you use our tools.

@BigTireGarage 8 месяцев назад

You bet!

@PaulKaiser42 8 месяцев назад

Great to have you back! Glad the rig is working so very well👍🏻

@robfox5892 8 месяцев назад

I just can't even with this truck. So much cool in one package of goodness. LOVE IT!

@BigTireGarage 8 месяцев назад

You and me both!

@katreniaclark 8 месяцев назад

Great to see that you are good. Truck is really nice for a toy.

@jeeplife4209 8 месяцев назад

Super excited for the LS swap for a JK. I’m currently acquiring parts for an LS swap into my 2door JK. I live only 15 minutes from your shop so you might see it around one day.

@dainperrault585 8 месяцев назад

This thing is sweet! Can’t wait to see more of this thing!

@aaronhendrickson7524 8 месяцев назад

Ian! I watch you all the time on FourWheeler and didn't know you had a RU-vid channel. You are one of my favorites on MotorTrend, I love how you explain and show everything your are doing on whatever you are working on and your craftsmanship is amazing! I'm definitely subscribed now!

@BigTireGarage 8 месяцев назад

Wow, thanks! Glad you enjoy the shows....hope you enjoy the channel

@raullasvegas 8 месяцев назад

amazing swap! Thats just awesome.

@number1yota 8 месяцев назад

Humm, looking forward to the LS Swap in the JK. That was a sweet ol Chevrolet as you were pulling out onto the road. Its cool to know that this wasn't just another tv project truck that only looked cool for tv, but is functional and pretty much fully (factory like) functional. Great Job.

@bigchrisb59 8 месяцев назад

Can't wait for all the new content

@beadblaster9508 8 месяцев назад

Finally a video. Thanks. Are you going tondo your question answering videos again.

@BigTireGarage 8 месяцев назад

More to come!

@paulki8fr 8 месяцев назад

Only thing about the timp gage adapter you put in the upper hose is. If the thermostat get stuck close then the engine will over heat and the gage will not show it. That is the only set back with that system. I love you videos thanks so much for doing the work for us to see.

@lennyross2813 8 месяцев назад

I feel like a ballerina everytime I watch this show😂 spinny camera thing gotta go! Great build! Love it!

@blackote 8 месяцев назад

Love this truck! Have an XRunner myself, and wish I didnt live in Cali so I could do a swap just like this!!!

@BlackAndBlueGarage 8 месяцев назад

Like/LOVE your long-form sir; however, I know it takes time to produce. -grateful

@overloadOverland 8 месяцев назад

Us hard core Jeep/classsic VW guys can appreciate Toyotas too can’t we? nice work!! lovin the channel and the icing on the cake is the Canadian origin story. thank you for being you!!

@BigTireGarage 8 месяцев назад

Agree...but Yota peeps are more brand loyal than most

@TheGoodTheBadTheRowdy 8 месяцев назад

Nice build! My son did something similar while working at a junkyard a few years ago while he finished nursing. He swapped a newer 6.2L chevy based v8 into his! Now I am kinda getting that itch! I just imported a series 79 for my ranch in mxo and go back and forth between usa and there, but I had been driving a 2018 Tacoma that is hitting nearly 390k, and I think a v8 swap is in its future!

@BigTireGarage 8 месяцев назад

That is awesome!

@dogpotter 8 месяцев назад

thanks for the update

@BigTireGarage 8 месяцев назад

Any time!

@coryridder1937 8 месяцев назад

Long time no see! Super cool that you've got the ol girl up and running. Just got my Roguefab tube bender put together today. Time to start modifying the 95 Toyota pickup!

@BigTireGarage 8 месяцев назад

Rock on!

@lyndelllyon754 8 месяцев назад

Awesome on myself I love the FJ

@shanewright6958 8 месяцев назад

It’s a great looking truck 👍👍

@BigTireGarage 8 месяцев назад

Thanks 👍

@MrRobertSpearsJr 8 месяцев назад

Looking great

@BigTireGarage 8 месяцев назад

Thank you! Cheers!

@stationarynomad1225 8 месяцев назад

very cool swap.

@earlderksen8998 5 месяцев назад

Ian I think you made a good choice on your engine swap, sounds good, my cousin and I met you at the four-wheel and off-road jamboree, hope you get back to the jamboree again

@BigTireGarage 5 месяцев назад

Yeah the jamborees used to be so much fun!!!

@stevec5657 7 месяцев назад

I had a 1st Gen Tundra with that 4.7 and that is a very smooth running V8. From a paint and bodywork perspective, if you decide to paint match the fenders and bed sides, I'd also paint the grill surround. I think it would give the truck an overall cool custom look. Great project btw!

@BigTireGarage 7 месяцев назад

I think the plan will be to eventually do a full white respray on the truck...

@adambrown7741 8 месяцев назад

Sequoia guys and tundra guys running 35s behind their 2uz run 4.88 years. Factory 4.10 is what the first gen sequoias came with, granted about 2k more lbs. so for sure 4.10 to 4.56 would be the sweet spot. Ypur mpg is solid as well. Going to a higher gear ratio, it’ll for sure pick up some highway mpgs!

@penningtonmetalworks283 8 месяцев назад

I thought this at first too but, it is a manual vs. an auto trans. Toyota always ran lower gears in an auto than a manual.

@ratfarmers 8 месяцев назад

Such a sweet rig! The front weight difference between driver and passenger would be totally even if measurements were taken with me in the driver's seat! Hehe

@hoagiesherlin7732 8 месяцев назад

Love that truck!!!

@codybesler1026 6 месяцев назад

Recent subscriber but watched you for years back on Spike. 😄 Anyway you mentioned that you are contemplating where to go with your next trip. I’d love to see you tackle the Alexander Mackenzie Heritage Trail up in BC. I did it and filmed it in 2019 and will be going again this year. It’s an adventure to say the least. Like you I’m originally from Canada but have lived in the western US since the mid 90’s. Love to overland and/or hard off roading at least once a year up to the great white north.

@BigTireGarage 6 месяцев назад

Thanks for the tip!!!

@genoquichocho3492 8 месяцев назад

It also could be because your suspension isn't at rest. Lift the control arm at the furthest point to keep the suspension compressed as much as possible.

@CB10-6 3 месяца назад

My 2001 tacoma double cab V6 gets 18 real world combined mpg, so you’re doing well having more torque. By the way, love your music choice!

@BigTireGarage 3 месяца назад

Thanks.....and good to hear

@macgyver03ga 8 месяцев назад

Thanks for the update! I wanna swap a 2uz into a 60 series cruiser. Yes an LS would be easier, but the Toyota purist in me wants to do that swap 😂🤣😂. Btw That track while you’re putting in the temp sensor reminds me of Pretty Lights style.

@BigTireGarage 8 месяцев назад

Right on! Yes I think the engine package is perfect for any toyota...I wish there were more stand alone ecu options for it.

@BruceCookfmx 8 месяцев назад

Looking forward to the JK LS swap 👍🏻

@Finksta951 4 месяца назад

I love seeing this dude wearing those big ole seeing eye glasses that he's got. I feel like someone should get a caricature drawn and sent to him so he can hang it in his shop.

@BigTireGarage 4 месяца назад

It has been done....man I gotta wear those readers to see...getting old has its downside

@mysmic 8 месяцев назад

Yes, complete LS swap video with all the details.

@mysmic 8 месяцев назад

…please

@BigTireGarage 8 месяцев назад

Will do!

@Dieselnm101 8 месяцев назад

wow 4k lbs at 18 mpg. The 5 speed manual is definitely doing the most for that 2uzfe. I just hand calculated my 03 GX470 on tiny 32’s at 13.5 mpg. AWD problems 😅. My stock 04 sequoia at best gets 16 mpg.

@BigTireGarage 8 месяцев назад

Thanks for the info!

@oliverohnemus5791 8 месяцев назад

If you’re gonna stay with the 35” tires the 4-10’s should be perfect

@thesmokinsalmon 4 месяца назад

So dope

@randy6350 8 месяцев назад

All I have seen was the very start and this one!

@lennyross2813 8 месяцев назад

If you plan on going with taller tires … 4.56 might be the wat to go depending on tires size choice. I can foreseee a SAS in the future 😉

@simbanugz2906 8 месяцев назад

I second that

@ChrisSmith-bt1cv 8 месяцев назад

Ian, when i worked at an off road shop we would run the golden rule, 4:10s for 33s and 4:56s for 35. I drove rigs with both(I'm sure you have too) i found the inline six's really like 456s with 35s.

@Willytwoscoops 8 месяцев назад

There are a lot of other factors that got into that, it’s a good rule but 4.10’s won’t be as good for this build. 4.56 are the sweet spot for this build between highway RPM’s and good crawl ratio

@BigTireGarage 8 месяцев назад

Yeah but the v8 and Manual change everything...

@Willytwoscoops 8 месяцев назад

@@BigTireGarage I would say 4.56’s would be better as a lot of the 4R/GX470 guys run 4.56 or even 4.88’s with that engine with autos; add that an 3.91 in FJ’s with 6 speed as well as 3.73 with the Tacoma. I think you’d be happy that combo personally without high RPM’s

@marcochavanne 6 месяцев назад

I had a 1999 Land Cruiser 100 series that came with a 2UZ. Ran 35"s and when I swapped to 5.29s mileage went up according to the hand calculator. (It did require using an 80 series rear carrier with the 100 series side gears for anyone curious how I managed that). The engine isn't working as hard with that mechanical advantage. Also picked up 1-2mpg by swapping in 12 Hole injectors. Probably best bang for the buck mod on the whole rig. Used it to tow thousands of pounds of shingles a day when I was a roofing contractor. It was the 4 speed trans so at 70mph RPMs were spinning around 3k. If you do a ton of highway 4.88s may be better, but for off-road and around town the 5.29s are excellent. Those gears with the 3:1 low range transfer case gears would make that thing crawl up anything I pointed it at.

@marcochavanne 6 месяцев назад

I'll also add it had the weaker 2 pinion front diff and it never blew up. Never broke a CV either despite flogging on it. With all that gearing you aren't stressing the drivetrain as much or spinning the tires really fast like when most people blow up IFS parts.

@BigTireGarage 6 месяцев назад

I have driven it with the 4.56 and it is perfect!!

@andrewb8548 8 месяцев назад

OEM constant pressure clamps cost half as much as those worm gear jobbies that heat cycles are cutting their way through your hoses.

@benjimann24 8 месяцев назад

The new tundra has the twin turbo 3.5 V6, 421 hp or something. I wonder if those turbos could be snagged and put on a 3.5 Tacoma. At least that’s what keeps me up at night…..

@delinquentdesign 8 месяцев назад

Good stuff thank you ian nice to see a girl Tacoma

@yjsaabman 8 месяцев назад

Great update thanks Ian! All the integration (except for the coolant temp gauge,) so why is the CEL on? 😉

@BigTireGarage 8 месяцев назад

I am fighting a fuel tank pressure sensor issue...To fix it I have to drop the fuel tank

@yjsaabman 8 месяцев назад

So nothing related to the swap, then. 👍

@trd4x429 5 месяцев назад

Great video! Can you build a first gen tundra with the second gen tundra engine 5.7 L :)

@landon390 8 месяцев назад

🔥🔥🔥

@joeygabriele71 8 месяцев назад

Nice build, what kind of headlights are those?they look cool

@MyLilMule 8 месяцев назад

I don't want to alarm you, but your check engine light is on. 😉 I'm a Jeep guy, too. But if I had the chance to get a Tacoma, I would.

@BigTireGarage 8 месяцев назад

I know, I am chasing a fuel tank pressure sensor issue.

@jonathanmorgan3735 8 месяцев назад

You were actually leaking blinker fluid!! 😂

@chrisluehmann3094 4 месяца назад

I'm getting about 11 mpg from my 2019 Tacoma w/35's and 5.29's so 18 mpg is pretty damn good man. I wonder how hard it would be to swap it.

@jaredc5789 7 месяцев назад

You should do a Ivan Stewart red orange and yellow paint job or wrap like the old baja Toyotas 👌 and your Toyota is already white with Baja fender flares so it would look sweet.

@BigTireGarage 7 месяцев назад

Cool idea

@jaredc5789 7 месяцев назад

@@BigTireGarage there was a arcade game with his Toyota on it called Ivan Stewarts super off road. When I was a kid I remember playing it at a local pizza place and there were three steering wheels to race other people and you had to pick up little nitrous bottles for boost 😂

@BigTireGarage 7 месяцев назад

I own that game!!!

@ronthompson2366 8 месяцев назад

Really enjoyed this. I had not been following this particular build. Glad i came across it, because you stuck with Toyota instead of following the trend and swapping in another brand diesel or gas engine. The Toyota V8 has more than enough "power" and "torque " for the truck. However I am curious if there is any aftermarket performance improvements available for this engine ? Lastly you mentioned the gear ratio. Fully understand that and being able to calculate the tire size and rpm range to determine the best gear ratio... however just out of curiosity. You mentioned you have 35's on it. Would 37 's be able to fit and give any advantages over the 35's ? before calculating for the gear ratio running the 35 inch combination. Always enjoy watching your programs. Have watched you since you first started on television years ago. Always entertaining and insightful and just great projects. Continued success always.

@BigTireGarage 8 месяцев назад

The 35's fit the truck really well for what I use it for...I think the 4.56 would be good with 37's I honestly think I will end up back at 4.10

@ronthompson2366 8 месяцев назад

Thank you for taking the time to answer. I appreciate that and the information. I enjoy your channel and look forward to seeing what's next.

@Whiteout71 8 месяцев назад

Once I duct taped a temp probe to an upper radiator hose to get by

@blondejon83 8 месяцев назад

Dude awesome v8 manual taco! I need to build a taco on my yt channel down the road !

@illegal_straws 8 месяцев назад

Ever thought about an r2.8 swapped Tacoma? Seems like the perfect motor for it. Would love to see it done!

@BigTireGarage 8 месяцев назад

I would love to do an R2.8 in one of toyota motorhomes

@illegal_straws 8 месяцев назад

@@BigTireGarage when are we going to see a sunrader in the shop??

@brad-my2xq 5 месяцев назад

New frame next video forsure!

@BigTireGarage 5 месяцев назад

Done and done

@BlueDually4x4 8 месяцев назад

V8 truck with 35s and under 4k pounds sounds like an awesome package. Not real sure what you could do to make it better.

@BigTireGarage 8 месяцев назад

I have a couple of ideas!!

@michaellauer3397 8 месяцев назад

For the corner weight disparity…. Drive on the scales. Dropping ifs on the pads side-loads the scales

@BigTireGarage 8 месяцев назад

Good info....I was wondering since I dropped this onto the scales side at a time...I normally drop front and rear at the same time.....good call

@michaellauer3397 8 месяцев назад

Yeah it might be interesting to see a re-weigh. May not be as much different, but since there wasn’t an appreciable “cross weight” it may be your issue. Anybody who builds from scratch or completely re-configure the vehicle like you do should be using scales. When I was doing the circle track stuff it was obviously an imperative. But I do wonder if you have actual cross/wedge.

@raymondmiller4981 8 месяцев назад

Thank you for more longer videos. I realize that shorts are probably easier, but I just won't watch any shorts by any content creator.

@JohnDoe-ud2cc 8 месяцев назад

You should have used a 04 4Runner v8 as a parts truck. The 4Runner is the same platform as the Tacoma and so everything would have been a direct fit

@BigTireGarage 8 месяцев назад

Have you tried to buy an 04 V8 4 Runner lately? Could of bought like 9 Tundras

@Evolution8R 8 месяцев назад

do you have a link for that xcale system? Also how do you like it? Are you going to do a corner balance on the Taco?

@cliff4695 8 месяцев назад

Only thing that gauge will tell you is the temp of the radiator, not the engine temp. Engine temp could be 30 degrees higher or more. Lower radiator hose would be more suitable if you want to use that to monitor temps

@ronaldtrombleyjr.2694 8 месяцев назад

Was gunna say the same, won’t know engine temp is especially if t stat sticks shut

@rcmike09 8 месяцев назад

That's the outlet of the engine, be really close to what is in the engine. The bottom radiator is the inlet to the engine.

@cliff4695 8 месяцев назад

@@rcmike09 how can you watch this channel and not know how a cooling system works? FYI, you're totally wrong but I won't roast you to bad for it.

@BigTireGarage 8 месяцев назад

Yeah I get that...but this is just to keep an eye on things...TBH...more of a precaution if the engine starts to get really hot.. the guage will tell me no matter where it is. Unless the stat sticks...that is true

@MyJdray 8 месяцев назад

If the struts are tacoma specific the driver side is set up higher than the passenger because of 'Taco Lean' Make sure you dont have the wrong side on. I made that mistake once.

@MrSkinny602 8 месяцев назад

17-18mpg is the best your going to get in that v8 if I remember right.

@JesseGunzo 6 месяцев назад

I have my 03 4 door Tacoma that desperately needs 2uz swap. 2uz 5 speed to be exact.

@kelvinelrick807 8 месяцев назад

If you haven't already, and maybe I'm blind and haven't seen it, could you show us what did to swap that T case and how you mounted that shift lever? I'd like to put an FJ's or 4 Runner's T case in my taco at some point in the future. Since I like manuals for a reason, I like to control the truck exactly how I want to.

@BigTireGarage 8 месяцев назад

It was really just a bolt in set up and then I cut a hole in the floor. Added the boot out of the FJ and that was all

@TheCheerio27 8 месяцев назад

You should of used a Scangauge for the coolant temps

@AustinLWright 8 месяцев назад

Does the harness issue mean you can’t read the temp from the OBDII? Otherwise seems like a Scangauge III is a better, cleaner option, and would allow you to track a bunch of inputs.

@BigTireGarage 8 месяцев назад

I could of yes...but the data going into the ecu in 2004 is limited...and the guage was sitting on the shelf

@killahjeep 6 месяцев назад

why not run a scanguage? can also keep an eye on trans and coolant temps and also provides you with the ability to read any codes... simple plug and play to the OBDII port..

@autotek7930 8 месяцев назад

There's gotta be a conversion module to make the input and output work together.

@BigTireGarage 8 месяцев назад

There might be...but honestly I think the guage is a more acurate way to monitor it

@d.collier_8280 8 месяцев назад

I Would like to have a rig just like it…

@craighuffman5397 8 месяцев назад

Can you swap an 04 guage cluster to get the coolant temp guage to work?

@shaunadams3170 8 месяцев назад

Just wondering, when you hooked up a scan tool, would it show coolant temp in the live data?

@travislangolf7800 8 месяцев назад

Crazy swap for you. Volvo t5 In a 99 xj....

@BigTireGarage 8 месяцев назад

I have had bad luck with Volvo T5's

@alejandroivanrodriguezzuni2991 4 месяца назад

I have a 2011 4cil. Single cab. Will the 4runner set up work on it. Witch year would that be, i should i do the tundra as on video...?

@adventuretrails1ato 8 месяцев назад

I have a 2002 Toyota Sequoia. I'm looking to put a manual transmission in. Of course I'm around just over 6,000 lb with me in it and full tank of gas. That being said are you happy with your 5 speed manual transmission or , do you wish 6-speed transmission❓ what's you're a transfer case ratio and four wheel low? Factory. And now with the 513 gearing?

@forrestmarshall8293 8 месяцев назад

What brand 5.13 gears were you running when you still had the 4 cylinder. I have 2010 regular cab 4wd tacoma and I'm trying to gear it to handle 35s as well

@BigTireGarage 8 месяцев назад

I think I mis remembered....they might be 5.29's....they were from Yukon

@nvrenuf_k5933 8 месяцев назад

I really like the truck but do you have any concerns about the 5spd lasting behind the V8? Do you feel the need to baby it so it lasts?

@BigTireGarage 8 месяцев назад

Nope...the adapter is used in Supras feeding the same trans...with ceazy drifting and power adders

@eduardocortes9118 8 месяцев назад

Would the swap be easier and same steps(parts) with a 2WD Tacoma? My engine blew and idk if I should just upgrade or stick with same 4cyl

@BigTireGarage 8 месяцев назад

Would be same amount of work...

@inkedupgoon7478 3 месяца назад

would you consider this equally as doable with the r160f 6 speed that came in the v6? would there be any major changes to the build process other than the clutch components?

@BigTireGarage 3 месяца назад

You would have to see if the adapter is available for that trans..

@DaveOfAllMasterOfNone 8 месяцев назад

What company did you use to make the harness conversion?

@snadon75 8 месяцев назад

Is a solid axle swap in the future? Curious as to what you have planned next for it.

@build2break 8 месяцев назад

That’s my guess!

@stephenyambor1422 8 месяцев назад

I am playing with a CAN bus project right now for one of my cars. Does anyone know what problem he is having with the coolant temp value in the ECU not making it to the dash? Is it a data signal (CAN), or an analog value or a digital PWM signal? That truck is sick!

@BigTireGarage 8 месяцев назад

It is the difference between the outputs on the ECU for those vehicle years. The 04 uses one type of output (that is what is in the truck making the engine work) and the 05 Instument Panel...I am not sure if it is a CAN communication issue or tpe of output

@seib6324 8 месяцев назад

I enjoy your videos but I don't like the pop-up ads that distract from your great videos

@BigTireGarage 8 месяцев назад

I understand but thats a RU-vid decision

@GarnRcN 8 месяцев назад

This man slaps 18MPG down like it's bad, the sequoia with the 4.7L average literally 13 mpg

@BigTireGarage 8 месяцев назад

I will get it better

@GarnRcN 8 месяцев назад

@@BigTireGarage can't wait to see. I love all the content brother.

@stevemccollam1805 8 месяцев назад

For the coolant gauge issue…could you swap in a cluster from an ‘05 Tacoma?

@BigTireGarage 8 месяцев назад

They are totally different designs

@shawnhaffa7516 8 месяцев назад

What are you going to do about the rotting out frame???

@todayletsbuild2153 8 месяцев назад

This is off topic but what head unit is that? I am currently trying to find a double din big screen like that. How well does it work?

@BigTireGarage 8 месяцев назад

It is from stinger off road...pretty happy with for the price

@claytonstallings1514 8 месяцев назад

I hope its a trd blower

@exploringwithJim 8 месяцев назад

R U providing play by play at KOH again this year?

@BigTireGarage 8 месяцев назад

I believe so yes

@exploringwithJim 8 месяцев назад

Awesome

@jakewaters5563 8 месяцев назад

Are Dual transfer cases and a front locker the big change?

@BigTireGarage 8 месяцев назад

Nope...bigger

@geo.gastaneta4122 4 месяца назад

Hello Bro. I have an 89 4runner going 1UZ . How did you prime the oil in the engine?

@BigTireGarage 4 месяца назад

Prime how? For initial start up? I don't prime engines unless I rebuild them and they are "dry" just changing the oil pan I don't think needs o be primed....it really is no difference than doing an oil change