3 MONTH Build FINISHED! 🤯 VannyStyle & DJI O3 Air Unit Reveal!

Подписаться 332 тыс.

Просмотров 61 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the Vannystyle frame kit at:
* Rotor Riot - bit.ly/3dGFeFx
* GetFPV - bit.ly/3Rs9AeB
* RaceDayQuads - bit.ly/3f8GKk5
* Vannystyle Store - bit.ly/3xJTjc4
Buy the DJI O3 upgrade kit at:
* Vannystyle Store - vannystyle.com/products/o3-up...
Buy the Speedybee F7 Stack at:
* GetFPV - bit.ly/3QUM6wW
* RaceDayQuads - bit.ly/3kQmyqd
* NewBeeDrone - bit.ly/3WLf9Wr
* Amazon - amzn.to/3ReXLrG
Buy the Farouk Sbang motors at:
* GetFPV - bit.ly/3DljbxY
* RaceDayQuads - bit.ly/3Dljc50
Buy the DJI O3 Air Unit at:
* Ready Made RC - bit.ly/3h6Uygj
* RaceDayQuads - bit.ly/3HyV1Bp
* NewBeeDrone - bit.ly/3uxEEPf
* Rotor Riot - bit.ly/3Ji88Jy
* iFlight - bit.ly/3Dl3zKH
* Makerfire - bit.ly/3JkvZIq
* Amazon - amzn.to/3j7n8zo
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
---
00:00:00 - My very first O3 build!
00:00:22 - Sample flights
00:02:21 - Parts list
My review of the O3 air unit: • DJI O3 Air Unit // Ful...
00:04:29 - Assemble the bottom plate and arms
00:08:51 - Install the motors and ESC
00:13:05 - Solder XT60 and motors to ESC
Want to be better at soldering? • Most FPV pilots need t...
Learn more about this crazy 3rd hand tool! • This is the best 3rd h...
00:15:49 - The first problem of the build
SH 1.0 cable set from RacedayQuads - bit.ly/3GK0ncC
00:19:36 - The second problem of the build
00:21:26 - Mount the O3 air unit
All Vannystyle 3D prints at Brain3D - www.brain3d.co/search?q=vanny...
00:27:38 - A big problem with the O3 mount
00:28:52 - Install the receiver
3D printed antenna mounts from LicenseToDrive - www.thingiverse.com/haku3d/de...
00:34:25 - Mount the O3 camera
00:35:02 - We are NEARLY DONE
00:36:41 - Is this a good frame?

Опубликовано:

9 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 232

@maikwerner7325 Год назад

It is just enjoyable for me to watch somebody build (struggle) a kwad. so relaxing, thank you :)

@PortalFPV Год назад

For the longest time I actually "made" my own SH connectors by painstakingly crimping on those super tiny metal ends. THEN someone finally released a kit 😍 and I haven't had to crimp since 🥰

@TinChozZz Год назад

Joshua, you are a genius, your English is clear and easy to understand for people who don't speak English very well like me. Thanks for sharing all your knowledge and wisdom.

@saiyanfpv5358 Год назад

Vannystyle and the o3 was my first 5” build. It is my daily driver now. I love it!

@kennykobi Год назад

Hey Josh I got the same 03 3d mount. I love it, I did ended up adding a little oring on the bottom. I noticed the smallest screw I had was a little long and hardly touched the 03 air unit. So I added the pressnuts for a little color and gave me the correct length. The alien tape is cool. But it gets dirty and looses tack very quickly. Wet it and then it gets sticky again. I actually used it and went back.

@MessingWithCode Год назад

Well PLAN YOUR BUILD'S BETTER!!!! , that one got me 🤣🤣🤣🤣🤣

@slappomatthew Год назад

I just did a walksnail build in the vanny frame. its a tight fit for sure. the rear stand off is hard against the VTX. I dont see the point of shaving 2mm here or there when it makes building so difficult. also the stock V shaped single hole camera mount pretty much sucks. all I see is standoffs in my camera and the camera angle changes every time I blink.

@HartPv Год назад

Wow, I just built this exact quad with the exact parts and I can't believe how much easier it would have been if I had thought to turn the ESC around. I destroyed an O3 air unit by trying to cram it all in and it shorted on the ESC pads. Also no room for a TPU mount on the rear standoff, I ripped off both antenna leads from the air unit as well. All around it was a mess and cost a lot of money. Live and learn.

@ninmarioscc Год назад

Took about two months for the new dji goggles preorder to come but it's finally here. Who else got theirs this week ?

@efelton2699 Год назад

You’re getting really good dude.

@inoc805 Год назад

I like those motors. I have 4 FPV Cycle Glides. Two of them have the Farouk motors and the other two have Hyperlite E 2207.5 2222kv on 6S. The Sbang motors have really nice low to mid throttle resolution but lack on the top end. They are definitely made for quick blips and sudden changes of direction. If you dont fly Sbang they are good for aggressive proximity freestyle.

@UnmannedSky Год назад

I think the F4 stack sells for $71. The F7 stack is more like $121. Still great value though! Personally I'd just use the F4. Great video JB! Your original build videos helped me tremendously when I first got into FPV! Also your soldering tutorial is still the best one out there!

@idealistau Год назад

Thanks JB for helpful educational content here! I am having trouble sourcing DJI O3 upgrade kit in Australia and really do not want to miss DJI O3 Air Unit. Any replacement I can use for that part only or if you recommend changing the whole frame to something else? Thanks.

@FredCharlebois Год назад

The last time saw those type of motor wire was the Tyro79, this tell you what type of quality this runs out against.

@lemonsquareFPV Год назад

Great build JB! I love Alex’s frame! Also I wanted to say, crazy how good you fly on the HDZero goggle, I found exactly the same myself with the Runcam90! The O3 stuff was really cool to look AT though! :p Development cost more on that motor, not less. It’s a way more durable wire, to resist prop strikes better. It was chosen by Farouk during testing.

@ChainsawFPV Год назад

Only 3 months? I am liking the obstacles in the yard. Gives your flying more of a race feel.

@jayg9209 Год назад

Can't wait to fly my Vannystyle rotor Riot built quad. Nd great video. 🫡

@jayg9209 Год назад

Random but caught my attention felt like sharing. @10:57 a orb is seen floating down ur shirt then takes a left angle. A spirit? Or dust perhaps. Leads me to plant a seed. In the near future we will fly with night vision and then in uv.. I've already caught night anomalies with my dji doing time lapse..interesting to say the least.

@streetzfpv Год назад

Omg..I had the same exact problem first build with speedybee didn't realize that wire harness was soo short and they only include one. Kakute had longer ones. I always mount my esc to the side.. Anyway I ended up extending the air unit wire.

@Gjoa1906 Год назад

JB, I’m astounded you don’t get bored of this stuff.. unreal.

@tonymorgan328 Год назад

It's the $$$😄

@DoNtRuNFr0mME Год назад

When you love it. It’s hard to get bored.

@redcobra1246 Год назад

I made a very similar build recently with walksnail instead. It's a pain in the ass to setup but it does fly well if you get it right

@MCsCreations Год назад

Fantastic build and flying, Joshua! 😃 About the plugs, you can always put a small drop of e6000 on them. Anyway, stay safe there with your family! 🖖😊

@jigaboolessworld Год назад

Baaahahahahahahahahahahahahahahahahahahah lmao

@dimapavlyshyn9783 Год назад

Hey Joshua, I finally build it, I have question regarding are there any tutorials how to setup such build in beta flight with DJI controller 2

@annonomus6675 Год назад

Ahh.. I had the same problem with the jbf7. The pin headers weren't in the right place for my build. Had to stretch the camera wires and ended up doing a splice job.

@barry_dalive Год назад

Nice Job, JB. I'm just finishing up practically the exact same build to the bolt, except I went with the Speedybee Master HD. I put my capacitor up front, and love the F7 V3. Care to share your tune on her? This is my first build, and I'm on the fourth video of you Betaflight 4.3 mega tutorial since it's the last thing I still need to learn to finish up strong with a full understanding. Thanks so much for everything. This video couldn't have come at a better time

@jonathanmgelmose7361 Год назад

where did he get all the 3D print from?

@0nec00ler Год назад

Hi there! Thanks for this video! What happened with TPU mount for DJI unit at the end? Double sided tape works better?=)

@jimreynolds8284 Год назад

I got that 3rd hand its like 60 bucks but wow did it take all the frustration away thanks Joshua

@ghiss46 Год назад

Hello thanks for the review, wondering what would you choose as a daily hdzero or 03 dji

@samsegars8047 Год назад

I ordered that exact stack and it came with the longer fc cable.

@Life_a_bike 8 месяцев назад

Aaand... bought the Omnifixo. DAMN you! 🙂

@Alluvian567 Год назад

I see you putting some screws in that don't have much bite, is that something you see as an issue? My quad was not built by me, but they had some motor protectors on them that causes the motors to have very few threads in contact. The build worked fine for awhile until one day I tried pulling out of a loop and the quad just went berzerk and dropped onto our barn roof hard. Searching through the wreckage I am pretty sure that the failure was that the motor screws vibrated out enough for the motor to just yank off the quad mid flight. When I put it back together I removed the motor protectors to give me another 1.5 mm or so of thread contact and then added some loctite for good measure. Have you seen threads back out like this? Is there a general rule of thumb for how many rotations of 'bite' a thread should have for different parts? Is locktite a good idea if you are borderline?

@RickLaBanca Год назад

Kapton also lets heat out vs shrink tube trapping it.

@christopherbuga3608 Год назад

is the speedybee f405 stack good enough for a 6s build with dji air unit and is there a big difference betrween the f405 stack and the f722 stack you used in this video. thanks for the help

@boominfree7408 Год назад

You should turn the air unit around if the wires reach ?

@seanpaul211 Год назад

Is the pin out on the speedybee F7 v3 stack the same as the DJI 03 air unit wire, to just plug in no soldering?

@billyocean9236 Год назад

Did you try the toilet tank setup first? Or decided not to from the beginning?

@noamperetz5805 Год назад

I like the blue shirt I want one!!

@SkyCandyVisuals 11 месяцев назад

The o3 works with the remote 2 correct then i wouldnt need a rx and antenna all together ? Im leaning towards that. Do you not use a dji remote 2 for a particular reason?

@k7arusi 28 дней назад

Hi Josh, Why are you using a capacitor with XT60? And why aren’t you using anti-spark?

@mcdjacedad7359 Год назад

hi josh question on soldering, what solder do you use,?

@jasonjohnson7241 Год назад

It looks like you ditched the mounts for the 03 Air unit at some point, I didn't seen them at the end of the video. If so, how do you have the 03 Air unit mounted now?

@DronePsyche Год назад

Is there anything you need to do in betaflight if you mount the ESC in the opposite direction to accommodate the capacitor??

@SuzukiQuadLife Год назад

Where can I get that bardwell I need one ASAP I’m the definition of that shirt. Built 2 5in freestyle quads An let’s say I’m spent more time flipping my quad over or going to get it than actual flight time. 🤣🤣🤣🤣🤣🤣🤣 you are one of the main reasons I got into this hobby Keep it up boss love the content all of your vids ROCK!!!!!!!!

@inCarsoNatedFPV Год назад

@joshua great build video but note you’ve got my curiosity through the roof! Odd motor dimensions and would like to know your opinion on them please

@reboot110 Год назад

I’m thinking about doing my 03 build on a AOS 5.5…still waiting on my goggles from GetFPV, but soon vey soon

@licensetodrive9930 Год назад

Thanks for the shout out on my 3D print designs, JB :)

@JoshuaBardwell Год назад

Any time!

@galimirnund6543 Год назад

I wasn't sure what vid to post this question on. I have your Drone kit edition V2-HD. I am watching the first of the 5 videos. At 11:46 you say to take out the 22 mm screws. I did that. Then you talk about the different size holes on the frame. Then at 12:19 you say 16 mm. I can't find them... did I miss something? Thanks for any help it's my first kit... lol

@SKATE_IT360 8 месяцев назад

What battery’s are you using with this build, I’m thinking of replicating it.

@testchannel1834 Год назад

Where did you find the wiring diagram for the Happy EP1 rx. ? Joshua

@christopherbuga3608 Год назад

also am i able to use a tx12 with elrs with a build with the dji air 03 unit if i install a reciever for it on the drone

@christopherbuga3608 Год назад

can i use the speedybee f405 stack in a build with the dji 03 air unit?

@Bazoinky. 10 месяцев назад

what if i were to leave the o3 wire under tension like that and also can you get a longer wire for the o3?

@johnrosner8964 Год назад

You could have bought the infinity 2 and 1 flight controller combo It takes up absolutely worksgreat. And they have a mount for the 03 argument that is absolutely brilliant and very minimalist no TPU Just a thought Bardwell

@bloatedgoatfpv Год назад

Stack height is the one complaint I have with the speedybee stack. I wound up ripping off all the sockets to get it thinner.

@UnmannedSky Год назад

I did the same!

@brandam4179 Год назад

Any benefit to having two capacitors on a build? Is it worth the effort.

@housinit Год назад

Alien Tape? I'm kind of a glue and tape freak. I'll have to try some of that. Have you ever heard of Joe's Sticky Stuff? Alien tape sounds similar. Joe's is made and marketed mainly for prop and set designers for theater and film production, but it can be used for all kinds of stuff. I love it and use it often.

@martinfpv5 Год назад

I love these motors but I hate the cables. Still waiting for the 2505.5 from rcinpower.

@Tim-Shows Год назад

Why not use the AOS 5 or 5.5 frame? I have all the same hardware, but yet to buy a frame, mainly because of the DJI O3 air unit. Was leaning towards the AOS 5.5. Any suggestions?

@ciclismneamt170 Год назад

Hi Joshua! Dont mind my dumb question : I'd like to mount an o3 air unit onto a Mavic drone (exterior case, without dismantling it) to use those dji goggles. Is it possible? What does this air unit needs to transmit data, a battery? Thank you for your time! (I hate the fact that goggles arent compatibile with Mavics)

@esquinahobby6086 Год назад

Amigo , o betaflight não reconhece o controle 2 da DJI , configuração e bind ok na Unit o3 Sabe me dizer uma provável solução ?

@tesimpamonami9188 2 месяца назад

Hi Joshua, I have a special problem with a Whoop Drone similar to the AcroBee75 HD O3 DJI/PNP, When you connect the Battery Nothing happens, I order a new Battery Balance it, same issue, I can go the the Flight Controller using Betaflight and I also update the DJI part with the DJI assistant Consumer, still nothing. Can you give me some pointers on how to do some more diagnostics , I will appreciate

@KCLeung-gm8ql Год назад

What is the type of the antenna? linear, RHCP or LHCP ?

@Editer38738 Год назад

Knoxville, Tennesse represent

@kinzokushirogane1594 Год назад

Isn't plastic insulation more durable to prophits?

@amen_ra6926 Год назад

To use your phrase, the frame seems rather "fiddly" with all the gyrations you had to go through to get everything to fit. The air unit antenna wires seemed to have some pretty tight bends where the u.fl connectors are. I think I would have gone with a slightly longer stack screw and sourced a longer standoff (or use a nylon nut as a spacer with each standoff to raise the top plate) if necessary and even cut the stack screw if needed to give the gummies a little more relief. But I'm kind of picky that way. Would the slightly higher standoff effect flight characteristics at all?

@BiecherBender Год назад

I don’t really like the speedybee stack. I had the exact same issues with a quadmula frame. The Esc had to face to the front, then the o3 cable was too short, but I also did not want to run it longer over the Esc. So I got a longer cable between Esc and fc, but then you can not really run it between fc and Esc because there is no room due to the 500 plugs that are soldered and glued to the board. Then I realised that the stack is too tall, I had to cut the silicon grommets and get longer stack screws…. It wasn’t nice.

@glytch5 Год назад

stiffer wire might be okay for motors because they train easier. Some PVC wire can be just as heat resistant as silicone, or darn near it.

@itsfpv2561 Год назад

what antenna would use on a v1 air unit\caddix vista with googles 2?

@loneranger101200 Год назад

I ran into this exact problem last night, probably going to extend the 03 wires to reach the fc.

@barry_dalive Год назад

Same here. I wound up just making my own JST connector

@theflyingsandalrc Год назад

Hey! What happened to the red electrical tape for the arms?????

@sobstvenno Год назад

Did you cut the yellow wire on 38:54? :)

@DriftaholiC Год назад

Yep, I'm gonna stick with the AOS 03

@sknotrockit1568 Год назад

I don't see the 03 unit mount on the website

@Ph4sh4 Год назад

Higher class screws aren’t always better. You need a certain bolt stretch to make sure the connection stays tight and don’t get loose over time. A higher class bolt can withstand higher tension, but also needs higher torque (creating a higher clamp load) to achieve the desired bolt stretch. Too much load might break the components (carbon fiber frame) if they can’t handle the load. -> a 12.9 screw might break your hardware if torqued to spec, or get loose if not stretched (torqued) enough, so 10.9 might be the better choice

@big-t-og678 Месяц назад

how much is the drone in total?

@Happy_FPV Год назад

ok wait, how do you know the harness of the screws??

@jameschampion1 Год назад

Hey man great video showing how it’s not always easy to make these things fit at times. What was the tape that you used for the Moto wires ??

@TheVeganarchism Год назад

I asked the same question months ago! It’s called wiring harness tape or cloth tape - you can get it on Amazon and from auto shops.

@Shooter_FPV Год назад

Try hockey stick tape... it's very sticky and super flexible (since my son plays, we always have it in the house..). And the tape comes in CRAZY colors/patterns...

@MadDragon75 Год назад

Great choice in FC. I absolutely love my 20x20 version. All FC's should be that easy to configure. I don't feel bad about not buying the JB FC after watching this.

@MadDragon75 Год назад

And no.. I'm not going to be that 20mm stack guy you speak of. You like what you like. No haters. 😉

@cmosdaboss Год назад

Question? Does adding the air unit 03 to my speedybee f405 v3 build allow me to use my dji controller 2 and goggles to operate the drone? The speedybee i have has plug and play for dji air unit

@JoshuaBardwell Год назад

Yes it does.

@windmillboxfpv Год назад

Just my 2 cents, it’s custom PTFE motor wire, it’s lightweight, cut resistant and also heat resistant.

@JoshuaBardwell Год назад

That's interesting. It's really frustrating that key details like this are not included on the product page. Whenever I do a video like this, the first thing I do is read up on the products, and this info isn't anywhere that I can find, even though I am now searching for "PTFE" keyword specifically. Rush's own site doesn't have this info.

@MaxwellCastrillo Год назад

Betaflight configuration ? OSD DJI O3

@ashmodeustacretiust2017 Год назад

hello everyone. Want to ask got my goggles 2 paired to old air unit. but sometimes the video feed just got stuttered no matter the signal strength was. even theres a time when it just unbearably stuttering to the point crasehd it even with Full signal Strength (50Mbps) pls Help, is it just my gogs Faulty or just compatibility issue with old air unit?? thank you in advance.

@klingusmctavern8672 10 месяцев назад

Anyone know if a 20x20 stack is available for showing o3 unit?

@UnmannedSky Год назад

How were the motors?

@sunsetpark_fpv Год назад

JB - @ 38:55 there is a cut yellow wire protruding from the air unit cable. was that wire unnecessary? Great build - I love the problem solving aspect of any build 😎

@JoshuaBardwell Год назад

It's the SBUS wire which I don't need because I'm not using the DJI controller.

@jimskee44 Год назад

I haven’t had any good luck with Speedy Bee stacks.. They don’t seem to be very durable

@maro0016 Год назад

There is a great Speedy Bee O3 compatible frame around…

@dimapavlyshyn9783 Год назад

Hi Joshua! I'm complete beginner but I would like to do this build and I have a question what battery should I use for it, I mean what should be the voltage and other staff for 6S battery? Thank you for your time!

@JoshuaBardwell Год назад

I would use a 6s 1100 mAh

@dimapavlyshyn9783 Год назад

Thank you!!!

@steamvogue Год назад

With wires short it fc backward … I’m meeting this problem every build :) and swapping cables from stack leftovers …

@DJBigSarge Год назад

Point out the link location on the phone. I cant seem to find the affiliate links using the phone

@JoshuaBardwell Год назад

The video description is there but YT hides it you have to click "more" to expand it.

@christopherconkright1317 3 дня назад

Turn the lock nuts over

@tk-maker Год назад

tried the speedybee F405, the loop is 3.8Khz but I can not feel any diff with my F722 that running at 8k (now set to 4k), Bluetooth Betaflight configurator app is an awesome feature.

@Raven187FPV Год назад

Awesome :)

@aerialimagery3216 Год назад

Love the look of the frame but don’t want to buy a frame with standoffs in view especially when the 03 camera replaces the GoPro. Same problem with the Demibot. Camera cage frames handle this much better in my opinion