3 new parts later and its still not fix. P0340 P0344. Lets look at the diagram. Watch Part 2 the fix

Подписаться 221 тыс.

Просмотров 8 тыс.

50% 1

Part 2 the fix here: • Parts Canon 3 sensors ...
I work at Brothers Motors in Snellville Ga if you want a estimate on repairs. Please note we work on appointments only. So look us up at www.BrothersMotorsLLC.com and set up an appointment. Please NOTE: The bulk of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy

Авто/Мото

Опубликовано:

23 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@OnlineMechanicTips 10 месяцев назад

Part 2 the fix here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QCx-PRSs8cc.html

@daewooparts 10 месяцев назад

The difference between a part seller & a real mechanic

@jamesanderson4014 10 месяцев назад

Checking wiring is key these days and is a reasonable check. Pulling sensor is a good good choice.

@jaywholoveseveryone1721 10 месяцев назад

Did I hear you say that she bought the part from Autozone and *Autozone* installed the part?

@jacksautorepair 10 месяцев назад

What people don’t understand when you get a code, it could be several different problems besides the sensor. The trouble code is to give you a clue as where to start testing. For those of you out there who believe a mechanic just reads codes then install the part, you are sadly mistaken. If you install a new part without doing any further testing and inspection to prove what the problem is, then you would be wasting your money. There are several videos online with P0340 that have nothing to do with the cam sensor itself. Different car, different problem!

@ACommenterOnYouTube 10 месяцев назад

Do you even know what the camshaft position sensor reads ?? If the ECU trips the cam pos sensor, that means its NOT see'ing cam rotation, either bad sensor or bad wiring between the sensor and the ecu. If the ECU trips an O2 sensor and says its lean, do you think thats a bad O2 sensor ?? Could be but could also be something else that is making the O2 sensor read lean ... But most would replace that O2 sensor to find thats NOT the issue. Cam sensor ONLY reads cam rotation, NOTHING ELSE

@jacksautorepair 10 месяцев назад

@@ACommenterOnRU-vid I have a video with P0340 and it was definitely not the CMP. Other professionals posted about the P0340 and it was a bad coil. Mine was coolant intrusion through the ECT wiring and had water and corrosion in the PCM connector.

@ACommenterOnYouTube 10 месяцев назад

@@jacksautorepair Just to add that not all cam sensors read the "cam" directly, some are put in the distributor and read the rotation of the distributor which is connected to the cam via other sprocket.

@bikeman1x11 10 месяцев назад

the code helps point you to an issue - always physically check wiring

@davidtarango4034 10 месяцев назад

I did same thing....ended up being bad wires on my connector to my cam sensor...undid factory tape and found broken wire and melted wire...fixed easy.

@zacharywallace2243 10 месяцев назад

Jt was having fun..🤣

@10100rsn 10 месяцев назад

Part 2, where the tone wheel just falls off while changing the timing belt.

@ACommenterOnYouTube 10 месяцев назад

The most common thing to do is SWAP the part out but NOBODY ever thinks that it can be the actual wiring between the sensor and the ECU ... While thats a RARE ocassion, it DOES happen.

@serious_philosopheegeez2294 9 месяцев назад

Thanks man

@69Dartman 10 месяцев назад

Neon lost the cam sensor and it wouldn't start, unplug the sensor and it would take about 10 turns then it would start. When the crank sensor went intermittent as it got warm it would freak out and run bad and die. I replaced it with a used one and it was fine till it died, 95 Neon. At least when the cam one went out you could unplug it and take forever to start like the Charger you have but it would run.

@stevejohnson1397 10 месяцев назад

Looks similar to the engine that they put in the eagle premier

@miguelmarquez6358 10 месяцев назад

Ima manager at Autozone and trust me I explain to people that the part it’s suggesting is just that a suggestion and it literally says “ Most Likely Solution” and I always recommend they talk to a mechanic first before purchasing any parts but most customers don’t listen and buy it anyways

@bigguy162 10 месяцев назад

My experience with autozone has been the same. I always tell people that if autozone employees knew what they were talking about they wouldn’t be working at autozone