No video :(

350Z How to Remove and Install Window Regulator & Motor W/Reset Procedure DETAILED VERSION

Подписаться 11 тыс.

Просмотров 58 тыс.

50% 1

What's up guys, had to replace my window regulator (actually, I didn't, it was just the switch lol) If you're new to the channel, consider subscribing, and make sure to hit that like button. I'll probably be doing something with my coolant system soon, possibly next.
Link for Reset Instructions SHORT VIDEO
• 350Z Window Regulator ...
Link for Reset Instructions PDF Download
www.powerwin.co...
eBay stores for used 350Z, G37, 300zx parts.
stores.ebay.com...
stores.ebay.com...
Like+Sub for more great content.
Instagram - @justdriftcharlie (brand new Instagram)
Facebook - / jusdrift.cha. .
I am not ASE certified, everything I do, I'm doing and learning at the same time. Instead of hiring people to do work for me I simply attempt to do it myself and most of the time it works out. I am not responsible for any damage, or personal injury that may occur from working on your own vehicles. This is solely for entertainment purposes.
Music: Dreams, and Luvly, by Joakim Karud
joakimkarud.ba...

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@neonshark337 4 месяца назад

Thanks for the directions. I did everything you did except adding a new switch. I ended up putting the old regulator back on. I'm still not sure what fixed it, but I think it may have been dirty connectors. Oddly enough, all is working now. I appreciate the detailed instructions. Getting the final bolts back on the door handle pieces was a real pain. I put a little bit of curled paper to guide the bolts back in to the holes, as the ratchet extension alone wasn't working, and I'm still not very good at working on cars in general. Also, I didn't even have to run the reset procedure. Cars are crazy.

@FatalFoe 2 года назад

Just finished replacing mine in my 03 350z, to put the time in prospective for most, should be about a hour and a half to 2 hours to do, having the regulator fully up definitely made it 1000% easier, the video was very well explained and well done

@theunclejeffchannel1 2 года назад

Dang, that was harder than I expected! I was just planning to change the motor, not the regulator, but it's kind of a pain in the rear to get the motor off and then everything back in with the regulator and window in place. But it worked. Thanks for the video!

@RPHowe Год назад

Thanks bro!! I took my apart and cleaned the motor...it worked but, I wouldn't have been able to do it without this video.!!

@raven69600 Год назад

Glad I ran across this video! The details and description makes this such an easy job… My sons 350’s driver side stopped working and a week later the passenger side stopped, I hope it’s just the switches and not the regulators. I can’t imagine both regulators going out, but it’s a Nissan 🤣 Thanks for the video 🤙🏽

@JCub316 5 лет назад

My door handle flew off after I popped a tire during a drift event so I opened my door up to see if parts of my door handle fell into the door and ended up unbolting every bolt on the panel trying to get into the inside of the door and ended up unbolting the glass from the tracks while it was in the down position and couldn't figure out what I did wrong or how to fix it. I found your video and it really helped me get a better idea of how to put everything back together so I just wanted to say thank you. I now know way more than I ever wanted to know about how my doors and windows work, at least changing my motors will be super easy when it comes time.

@fullthrottleperformance 5 лет назад

Awesome! I'm glad I could help you out!

@ZeroKitsunei Год назад

I did not have the same problem. I had someone smash my window. It was still super useful to see how much of a pain in the ass it would be to replace myself. Turns out it's not $600 worth pain in the ass to have someone else do it. So thanks.

@victorbucio800 6 лет назад

Good job bro keep holding down for the Z community 💪🏼

@fullthrottleperformance 6 лет назад

Thanks bro, much appreciated!

@picklerix6162 5 лет назад

I just replaced the passenger window motor in my Z last night. The window regulators in my Z seem to be good quality but the motors are cheap junk. There were foam inserts inside the plastic door panel which came loose when I removed the panel from the door. I reattached the foam inserts using gorilla glue. I installed a new Dorman window motor and I didn't have to execute the reset procedure on the new motor. It worked great after I installed it and tested it. I recommend that you watch several other videos before attempting this repair since the other videos cover other things like lubricating the window tracks before reinstalling the regulator.

@BuddyCoopers 11 месяцев назад

the pointy thing is called a dowl or an ice pick. Or pointy thing works well too.

@aaroncosta9761 5 лет назад

Saved me a bunch of time, especially the window reset procedure. Thanks bro!

@dalefranklin7247 2 года назад

Bro...THANK YOU FOR THIS VIDEO!! Very clear instruction on how to reset!!

@ChaseMMD 5 лет назад

Dude fantastic tutorial. I fixed my window. My problem was my bolts were loose to the regulator. BIG THUMPS UP!

@fullthrottleperformance 5 лет назад

Awesome bro! Glad I helped you out!

@ChaseMMD 5 лет назад

@@fullthrottleperformance I'm happy to see that support for 350z's are so great! I had a 2010 Nissan Sentra SE-R Spec V and support and mod parts we're minimal for it.

@fullthrottleperformance 5 лет назад

Yeah, I'm trying to put out more videos for the Z chassis and how they're put together. Because when I first started taking them apart there wasn't any real videos on how to disassemble or replace parts

@theunclejeffchannel1 2 года назад

Thanks!!! Just brought my new (old) 350Z home. The only thing I've found wrong is the passenger window. It went down and up... once... now it's a half-inch from the top and won't move. The switch just makes a little "relay-like" click... so I assmued the motor was out until I got to the end of your video - now I'm thinking maybe just the switch. Thanks again!

@michaelwray8132 4 года назад

Thanks for the video. I saved so much money doing this myself. Your detailed demonstration made it possible!

@geeaye64 5 лет назад

I like the washer bit on the door handle. I'm going to do the same whenever I have to take off my door handle

@fullthrottleperformance 5 лет назад

It helps a little lol

@wisdomofgod9239 3 года назад

Bro a mechanic will charge you 1200 for something that takes 30 min to a hour I appreciate the video

@kennylee9959 5 лет назад

What a Great & meticulous Video! Thanks for sharing.

@carlharvey7098 6 лет назад

Just what i needed! My window has just stopped dropping down an inch or so when you open the door...Pain in the backside

@fullthrottleperformance 6 лет назад

Carl Harvey yeah these windows can be a pain in the ass lol

@andreymenshikov8775 11 месяцев назад

Hi! Thank you for the video. It is very helpful. I'm wondering if you would know where you got the switch from? Thank you!

@daveyofyeshua 6 лет назад

Great tutorial again dude, very informative - keep it up!!

@fullthrottleperformance 6 лет назад

Hey man, thanks for the support!

@Rekoyl116 3 года назад

Thanks bro, saved me some time at work

@ThatRedNismo 3 года назад

I wish you had made a tutorial for the 370z. I’ve been looking for months now.

@DriftOutlaws 2 года назад

Cheers man 👊 This helped heaps and saved me a shit tonne of time

@redbenjis 4 года назад

Good video. Gave you thumb up. Can you tell me how to test switch. Driver side goes up/down intermittently. Replacing motor only. Passenger side clicks but window will not roll down.

@fullthrottleperformance 4 года назад

There may be a specific way to test the switch but I'm unaware of how to do so. But, in my experience when the switch is making a clicking sound it has been bad. But honestly, there's no way of me knowing without hearing it personally. Thanks for the support tho man! It's much appreciated

@baddriversoflittlerock8359 4 года назад

If you hit the left switch for the right window, and just here a click from the right door. Would that be right switch, or bad window motor? Thanks for the great video!

@fullthrottleperformance 4 года назад

Sorry for the super delayed response. In my case it was the bad switch causing the clicking sound

@christiandecaul9140 4 года назад

I’m not sure if it’s just my switch cause my driver side window rolls down like it’s the motor

@JackGriffithsgarage 5 лет назад

Great job thank you! Reset instructions were key!

@fullthrottleperformance 5 лет назад

Awesome! Good to hear! And thank you

@BAD-SHEEP-INFLUENCERS 5 лет назад

Thanks allot for the video, Helps allot

@fullthrottleperformance 5 лет назад

Glad I could help:)

@jeremygalloway1348 3 года назад

Did you lube the track mechanism any? What was the bump noise when you showed it rolling up like it should? When it came to the top there was a bump/bang noise...does that happen everytime you roll it up? Only with door open?

@fullthrottleperformance 3 года назад

Yes I believe I did that time, and the noise is me popping the door open and the window going down slightly at the same time

@jeremyharden7041 5 лет назад

I'm working on my passenger side window and it will roll up but is acting like its stuck while rolling up

@fullthrottleperformance 4 года назад

If the window is out of alignment the pressure it has on it can overpower the motor Sorry for the super delayed response

@aybehcee 4 года назад

my car window wouldn't go down when I open the door. Then when I close it, it would close than the window would go down halfway. I tried using the switch and I would have to go down before I could go up. ( sometimes took a try or 2.) I am guessing that would be the motor? How do you know for sure if it is the window switch or the motor that went bad?

@anff 5 лет назад

It works!

@fullthrottleperformance 5 лет назад

Awesome! Glad this helped you out!

@tonym8492 4 года назад

Do you know if the door reinforcement is removal with bolts or does it have to be cut out thanks for your time.

@fullthrottleperformance 4 года назад

Honestly, I've never tried lol

@alonsoordonez563 3 года назад

How do I now it’s the switch

@VINCENTDARKLY 3 года назад

Thanks

@mikebonez2one6 5 лет назад

Damnit bro! I should have watched the ENTIRE video BEFORE replacing everything. I did fine until the window reset. I put everything together, then saw the window is 1/8 " down when i closed the door. Is there any reset that i can do without taking it all back apart?

@fullthrottleperformance 5 лет назад

Dammnnn that sucks bro. You gotta take it apart.... no other way lol

@mikebonez2one6 5 лет назад

@@fullthrottleperformance alright,thanks for the help bro. Keep up the vids awesome job!

@ShoshinMizu 5 лет назад

Howd you get the window back in

@fullthrottleperformance 5 лет назад

I don't understand? Once the new regulator is plugged up, you can use the switch to raise the window guides, and slide the window in the top of the door.

@ShoshinMizu 5 лет назад

@@fullthrottleperformance ok thanks do i need to loosen the screws that clamp the glass or anything?

@fullthrottleperformance 5 лет назад

@ 13:00

@7381366 4 года назад

Do you center the tabs on the glass or do you let the screw rest on the lift and tighten them ?

@fullthrottleperformance 4 года назад

Sorry for the super delayed response. You have to adjust the window intermittently, as you figure out the best position. It's all covered in the video

@Gagefully 4 года назад

What scanner do you use

@JBONMETUBE 4 года назад

Gr8 vid

@alwyswin8045 4 года назад

My top one on the door handle just spins doesn’t come lose or out

@fullthrottleperformance 4 года назад

If your handle is already broken just pull on it and the bolt portion should snap off. Then use pliers to hold the backside and the 10mm on the other and it should come off

@fullthrottleperformance 4 года назад

Just be careful not to damage your door

@alwyswin8045 4 года назад

Full Throttle yea it was an entire process door handle was perfect but i asked my dad to see how he wanted to take it out he snapped it off we then tried pulling the bolt whilst turning it snapped the bolt in half so we had to take whole door apart and use channel locks on inside of door and back it out the rest of the way towards the window side then re thread the hole 😂

@z33tanner 5 лет назад

Hey all I am in the process of replacing, well, reinstalling my window motor because it two of the three bolts and backed out and the motor was so loose it had started skip and strip the 3/8" drive. The problem is I cannot get the motor drive to turn in order to align it to the window regulator hole. I tried turning the motor by hand and the regulator with an extension but neither budge. Should I just replace my window regulator or is there a way to align the two? Thanks in advance.

@fullthrottleperformance 5 лет назад

How badly is it stripped? If its pretty bad might wanna replace it, but if not you can put the wiring back to the motor and just use the button to slightly move the internal part that way you can align it

@HR-jy1nb 6 лет назад

Is there any possible way to get my window up without buying a new regulator. My window is stuck down and i can't afford to get it fixed right now

@fullthrottleperformance 6 лет назад

H R unbolt the window, pull it to the top, place a 2x4 under it. And use self tap screws to hold the 2x4 up. Don't use that door until you get it fixed because you won't have the function to lower the window when the door is opened. And it won't rise when it's closed.

@santiagomartinez5772 6 лет назад

Hey man I got a question can I just leave the window all the way up and not remove the glass out out of the door ?

@fullthrottleperformance 6 лет назад

Santiago Martinez are you replacing the regulator? Or just doing the reset procedure?

@rogerdeo8226 6 лет назад

Is their a way to tell whether it's the power switch or the regulator. When I bang on my door panel by the switch the window works. I am assuming it's a bad switch.

@fullthrottleperformance 6 лет назад

roger deo As far as I've seen, the window switch makes a clicking noise when it's bad. But I've never tried banging on the door panel, does it make any noise when it's not working?

@rogerdeo8226 6 лет назад

Thanks for the reply, no noise at all when its not working. When it works is perfect, doesn't stop halfway or make any noise. It's the driver side. Maybe not the switch because all the other switch on the panel works except for the driver window switch. Just don't want to buy a new one $450 OEM and it be the regulator that's bad. My driver side regulator went bad on my Nissan truck, but the symptoms was classic, window stopped halfway, worked sometimes, you can force it up sometimes. then it when all the way down and won't come back up. LOL. Thanks for taking the time to reply. Your videos are really informative.

@fullthrottleperformance 6 лет назад

roger deo I doubt it's the switch then, probably the motor, you don't need to buy a brand new OEM one. The motors are fairly cheap, you can probably buy only the motor for around 40 on ebay.

@MisterDogg 5 лет назад

Will you tell me what the name of the song is please?

@fullthrottleperformance 5 лет назад

Everything including the music is in the description. The music is at the bottom

@damionlafortune9184 6 лет назад

What’s wrong with the regulator if when you open the door the window goes up a little bit instead of down?

@fullthrottleperformance 6 лет назад

Damn, huh I don't know lol. Ive never heard of that happening before. You got the car that way?

@damionlafortune9184 6 лет назад

Full Throttle I got the car with a dead door,nothing worked...a lot of frustration lol

@fullthrottleperformance 6 лет назад

@@damionlafortune9184 I get it, lol. You should try the reset process and see if that works. Definitely let me know if it works tho👌👍

@BUSTRCHERRI 6 лет назад

See THATS the problem. You keepvreplacing the window motor instead of just addressing WHY it breaks down in the first place. Its such an easy fix and doesn't cost you a friggin DIME. The problem is the carbon brushes are held with a plastic sleeve an d the sleeve gets hummed up with the dust. Blow it out ..give it a blast of WD40. and you're done. The other underlying problem with the design is the springs that push the carbon brushes onto the motor are too weak as well. Such an easy fix, and costs nothing.

@fullthrottleperformance 6 лет назад

Are you talking about the internals of the motor? Because I've done that before if that's what you're talking about, and it's not always the issue, i've only taken one motor apart that's been having issues that actually had anything gummed up internally. Many of the motors are sealed fine and just have the factory grease inside

@wasabikimchi7891 5 лет назад

FuckEbonics that is a temporary solution... works for awhile but motor gives up eventually...

@theripper121 5 лет назад

@@wasabikimchi7891 Yep one issue with these motors is because they are the same as many other Nissan Infiniti cars and those cars are usually 4 doored cars. The g35 coupe and 350z being coupes tend to have quite large windows and long pieces of glass. More wear on the motors themselves compared to sedans where the glass isn't as long.

@picklerix6162 5 лет назад

As wasabi said, the WD40 trick is temporary at best. If I'm going to the trouble of taking a door apart, I'm going to install a new motor. My time is worth more than a new motor.

@Supremeleader6969 5 лет назад

yeah lmao this didn’t help, the reset button on the motor doesn’t even show through the hole i’m having to get a flat head through that..... and it still isn’t working.....

@fullthrottleperformance 5 лет назад

Seem's like you've got an issue with the motor design itself. Is it an aftermarket "cheaper" motor? Or OEM?

@Supremeleader6969 5 лет назад

Full Throttle shit was from o rileys was like $200 but my homie gave me a discount

@fullthrottleperformance 5 лет назад

That's wassup lol

@picklerix6162 5 лет назад

@@Supremeleader6969 - I bought a Dorman window motor for $59 (free shipping) online and it worked well for me. There are cheaper motors available on Ebay but I have heard some bad things about some of those no-name window motors.

@Supremeleader6969 5 лет назад

@@picklerix6162 damn ight bet thats way lower then what I had to pay. its okay I'm having to get new doors anyways my baby sister smashed mine into the curb...... little shit

@eddiejones3762 6 лет назад

New motor, still no power, what now?

@fullthrottleperformance 6 лет назад

Eddie Jones is there a clicking sound coming from the passenger or driver window switch? And make sure the passenger lock button isn't on the driver window switch

@forrestbivens9669 6 лет назад

I have this same issue. When I try and roll the window up, there is a clicking sound. Not sure how to proceed.

@fullthrottleperformance 6 лет назад

Forrest Bivens Where does the clicking sound come from? The passenger window switch?

@forrestbivens9669 6 лет назад

Full Throttle yes. Just replaced the window motor and when pressing up on the window button, a clicking noise will come from the window switch. It does a long click for as long as I hold the button, and makes the noise no matter if I try rolling up the window from driver side switch or passenger

@fullthrottleperformance 6 лет назад

Forrest Bivens It's the passenger window switch