3D Printing A Magnetic Chuck

Подписаться 41 тыс.

Просмотров 38 тыс.

50% 1

Man realises why he had that feeling
Music: Minecraft soundtrack
Patreon: / membership
Files:
www.printables.com/model/9316...
www.printables.com/model/9316...
Invaluable resource I used in understanding how these things work:
• 2118 Permanent Magnets...
Like subscribe all that stuff
My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Хобби

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@cactus7027 7 дней назад

Hard as it would be to show, and how few people care I understand why you don't show the full CAD design process. But, personally I'd absulutly love to see how you go about decisions for elements of design. There is world of tricks I could steal from just watching this one video alone.

@keinschwein8467 8 дней назад

Switchable magnets are cool. But would it not have been better to make the lower ring spinny and fix the upper one? This way the vice would not have to rotate (eliminating any chance to bump and misalign it in the process; and generally easier to handle when parts stick out and stuff). Well, probably not an issue with the small part you're going to tap on this.

@ThatRobHuman 8 дней назад

came here to say exactly this :)

@berlinberlin4246 8 дней назад

+1 for it

@Roobotics 8 дней назад

This also brings up the idea of *any* misalignment between the headpiece and the center of the rotating base, if you line it up with center of the bit and that's not the center of the pivot, it would also move out of the way when clamped.

@marsgizmo 8 дней назад

great design!

@toothlessblue 7 дней назад

The nuts popping up are a good indicator of which state it's in, without knowing it by eye

@origamerking6927 8 дней назад

your channel is a gift that just keeps on giving

@andrewbrown6279 8 дней назад

It really is I have a feeling He'll get really big in the future

@origamerking6927 8 дней назад

@@andrewbrown6279 for sure

@meirm471 8 дней назад

He is like a corner of sanity in the chaos of reality

@philippes.42069 8 дней назад

The way his videos are calming, interesting and also somewhat educational is amazing

@sprN0VA 8 дней назад

I love this! It's projects like this that prove 3D printing has real world applications beyond simply making plastic bits. Thanks for sharing!

@ironsienna 8 дней назад

You should rotate the lower part, so that the item stays in place when in locked/unlocked position

@Scout339th 3 дня назад

Wow, not only was this captivating but you had minecraft music in the background. Fantastic choice.

@homemadetools День назад

You've been doing great work with 3D builds lately. We shared this video on our homemade tool forum last week 😎

@Alan-xs3om 8 дней назад

THE MINECRAFT MUSIC YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

@danko6582 5 дней назад

Great solution. Also I've never seen nuts used in a mag chuck like that before.

@wtf1992lynx 8 дней назад

This dude engineers.

@Franckie.G 6 дней назад

Each one of your project alway follow the same paterns : tooking a place in my top 3d print practical things to make without any chance of regret , and how inspiring this is , sincerely thank you for your work !

@lumotroph 7 дней назад

Dude your designs are so inventive. Keep making things! It's inspiring, even though you're Australian. 😁(greetings from Johannesburg, ZA)

@donstelfox6921 7 дней назад

Thank you for sharing. Your work is inspiring me. Cheers

@fhmtz 7 дней назад

Awesome work, awesome video! Love your content

@cheesecake701_ 8 дней назад

Excellent execution, nice work!😊

@zarster 8 дней назад

I wish I had a need for such work holding. Your design looks very satisfying. Maybe I will get back to it in the future.

@notsonominal 7 дней назад

"Need" doesnt factor into 3d-printing and machining hobby so dont worry too much about that:D

@user-hn4ur7qh2r 6 дней назад

Everything is always on point. Can't get enough!

@DaveEtchells 8 дней назад

Kudos on another great, practical design!

@wakawakasplat 8 дней назад

Great work as always!

@matthewsullivan5713 7 дней назад

Dude you produce some incredible stuff. Can't wait to see new tools to 3D print! I am absolutely LOVING my ball vice. Cheers man!

@NathanCroucher 8 дней назад

Needs concrete

@philippes.42069 8 дней назад

😂

@shrodinger3844 7 дней назад

awesome build, i love your notebook!

@lsav1085 8 дней назад

Top project!

@curiosity-creates 7 дней назад

Very nice. This might be useful for indexing too.

@lindonwatson5402 6 дней назад

brilliant

@MaximilianonMars 7 дней назад

Awesome!

@PancakeInvaders 8 дней назад

That's really cool, in addition, if the nuts stayed still maybe they could be used for bolting things

@carpdog42 8 дней назад

Wow this is super timely as I was just thinking of something very similar as I have a need for such a thing but maybe not enough of a need to buy a commercial solution. I was just imagining something similar yesterday but, hadn't figured out how I could implement it without having to buy things that would make it totally uneconomical. Pretty sure I can implement a version of this with what I have on hand. So good!

@blackhole7818 7 дней назад

You love making tools, more than you love making stuff from those tools.

@chrisgenovese8188 8 дней назад

thats really awesome! my magnetic chuck cost $120 and weights about 50 pounds. its too big to use with any convenience. something like this seems much more practical.

@chuckles1808 7 дней назад

Magnets and 3d printing, my two favorite- is that minecraft music?

@1kreature 8 дней назад

I can see the point of this, but having a vice that moves as it locks down seems a bit iffy. All my magnetic vice work by moving the internal magnet assy, never the flux-transfering surface.

@sergejbykov30 8 дней назад

c418 is one hell of a genius

@sinithwar8991 8 дней назад

1:52 When you're haunted by social media dings...

@TinyMaths 6 дней назад

The $1 'reverse-ring' lens? 5:20 Nice shot!

@zarster 8 дней назад

Stuck in 360p cause I got here too early. Oh well. Too late to stop. You got me hooked

@zarster 8 дней назад

I lied. A refresh got me 1080p as options. All hail the youtube encoding magicians

@jw200 8 дней назад

You can't expect 1080 immediately after upload. It takes time to process the video

@zarster 8 дней назад

@@jw200exactly, hence my statement about being here early. RU-vid does however have some vert fast ASICs for encoding video that is multiple times faster then what can be done on consumer hardware

@kwigbo 8 дней назад

Where is the press adapter with a soldering iron? 😉 Threaded insert pressing has been in all of your recent videos... right? 😁 I use an off the shelf dremel drill press with an 3d printed adapter. Seems like a good use for what you are building.

@wanglydiaplt 8 дней назад

Any chance you'll be at Bay Area Maker Faire in October??

@nathanlannan2980 5 дней назад

hey, can you design a course on how you think through design challenges, and leverage 3d printing + concrete + hardware embedded in 3d prints to make custom precision tools? i'd pay like $40 for a high quality guide to getting inside your head like your planning process, choice of filaments, glue, where your source your hardware, 3d software of choice, tips around concrete, etc.

@ThatRobHuman 8 дней назад

Is there room, you think to modularize the round work surfaces? You've got one on the drill press, one on the tapping arm, and one on the ball vice. If you could tweak all three would you make them interchangable or is it not worth it?

@tim-tim89 8 дней назад

Do you have any info on what looks like an arbor press at the 4 minute mark?

@Flaakk 8 дней назад

How come you never show a shot of removing the vice after switching chuck off?

@John223 8 дней назад

oh my god. I thought I left Minecraft open 😂

@Idontrememberasking 5 дней назад

Why not longer neck for the chuck?

@konzetsu6068 8 дней назад

i was wracking my brain about how to 3d print a mag chuck... didnt consider nuts to carry the magnetic field! what kind of range does the field have? do you need to have the nuts bare against whatever you want to attach or can you have like a mm of pla sheet inbetween without losing to much attraction? also adding a thin plastic disc between the two layers might allow for easier locking and unlocking since you wont be fighting friction as well as the magnetic forces (or seal the bottom and add some lubrication to the system)

@satibel 8 дней назад

you could most likely one or 2 layers (maybe add an insert in the middle of the nut to reduce bridging ), or some sort of sheet, another option might be multi material printing some iron filled pla if you want 1mm. 0.2-0.5mm G10/FR4 might work well.

@king_james_official 6 дней назад

ohhh i thought that you're making a magnetic chuck for holding the tools that's very cool too, but why not make the bottom the spinning side? it wouldn't bump into the tools then

@electroinfinity1377 8 дней назад

what magnet did you use?

@enosunim 7 дней назад

You only show how it clicks and activated. But I never saw how you deactivate it and a wise is released. I guess it should release on the second click?

@HOSTRASOKYRA 7 дней назад

Nice printing but you constantly lose a center. A top part of magnet table shouldn't move.

@BlakeGording 8 дней назад

why minecraft music

@JTCF 8 дней назад

Firstly - great videos, immediately watched 3 of them. Secondly - your sound is way off. Your voice is ok, but the audio from the videos of assembly might be a little too loud and there are sharp peaks with scratching noise or when the chuck gets locked, just makes me uncomfortable. Just lower the footage volume or apply some filter.