Тёмный

6.0 LQ4 LS Motor Build Part 4 (Finishing Up) 

Lonnie's Garage (Puppetkicker)
Подписаться 23 тыс.
Просмотров 11 тыс.
50% 1

Parts used are as follows
Enginetech High Pressure Oil Pump EPK137
Enginetech Lower Engine Gasket Kit C293CS-A
Enginetech Upper Engine Gasket Kit C364HS-B
BTR Chromoly One Piece Pushrods, 7.400" Long, 5/16" Diameter, 0.080" Wall PR7400312-16
GM Harmonic Balancer Bolt 12557840
Duralast Timing Chain Kit 73133
Enginetech Head Bolt Kit HB171
Fel-Pro Cam Retaining Plate ES73115
If any of my videos have helped you in any way or inspired you or if u just want to join to help out a little, then please do so by going to my Patreon page and giving a donation. God Bless...
/ puppetkicker
Check Me Out Or Find Me On Facebook: Lonnie Rice ... lonnie.puppe...
I Also Have A Facebook Fan Page Located Here ... / puppetkickersgarage
You Can Also Hit Me Up On My Google+ ... plus.google.com/u/0/104744233...
I have sticker decals for sale also. Just ask me about how to get them.
---------------------------------------------------------------- ---††††-- ---††††--- †††††††††††† †††††††††††† ---††††--- ---††††--- ---††††--- ---††††--- ---††††--- ---††††---
*ALL GLORY GOES TO MY LORD **JESUS CHRIST*
"I own all rights to this production"
▼▼▼▼
Disclaimer:
....Don't Try This At Home Without Help And Or Supervision.....
My Videos Are Made For Educational And Entertainment Purposes Only. You Should Always Get Professional Advice And Training Before Using Any Power Tools. I Will Not Be Held Responsible For Accidents or Damages To Yourself or Anyone Else's Property.... Proceed At Your Own Risk!!!!!!
✞Subscribe if you would like receive new videos in your feed ... / lonniesgarage
✙Stop by my RU-vid channel for more videos ...
/ lonniesgarage

Авто/Мото

Опубликовано:

 

7 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 20   
@ron7922
@ron7922 2 года назад
Enjoyed all your video's...well done!
@LonniesGarage
@LonniesGarage 2 года назад
Ty
@arbot1
@arbot1 2 года назад
Thanks for sharing, good info!!!
@Coalblack79k10
@Coalblack79k10 4 года назад
Lonnies garage (taking projects from nothing to something) that’s a sign or a t shirt waiting to happen 👍🇺🇸
@ninorodriguez1547
@ninorodriguez1547 4 года назад
Beautiful brothaaa I just got one about too start my build too hell yeaaa
@trentdawg2832
@trentdawg2832 3 года назад
I did similar with my lq4 by putting ....030 over ls2 pistons and 64cc ls3 heads on it for even more compression, only to add a lsa supercharger 6 months later.....motor absolutely screams in my nova
@user-cc5ez5kv4f
@user-cc5ez5kv4f 3 года назад
that's the beautiful
@pezaovip69
@pezaovip69 2 года назад
Watching all the way from New Zealand , just about to start a swap on my 84 C10 , very hard to find parts here and engines also expensive. I am unsure if I keep my TH350 or use the 6L40 . Thanks for the help with the videos learning a lot from your channel.
@rikkibloemsaatphoto
@rikkibloemsaatphoto 2 года назад
Shoot me a message mate. I'm a BTR dealer here in New Zealand - have lots of these parts available on the shelf.
@pezaovip69
@pezaovip69 2 года назад
@@rikkibloemsaatphoto sounds good do you a website or contact details. I just bought an LS1 and after gasket set bolts and probably can . Also looking for trans member and alternator relocation kit . Cheers. Rod
@pezaovip69
@pezaovip69 2 года назад
@@rikkibloemsaatphoto transition cross member
@richardlerma8811
@richardlerma8811 3 года назад
What engine block mounting brackets are you using?
@LonniesGarage
@LonniesGarage 3 года назад
Tejas Steel Works LS Mounts
@lornemclean6748
@lornemclean6748 4 года назад
How were you able to figure out push rod length?
@trentdawg2832
@trentdawg2832 3 года назад
Unless you have the heads milled or block decked considerably you should be fine at 7.400" almost every time
@alexurzua4728
@alexurzua4728 3 года назад
What casting number cylinder head did you use on this 6.2
@LonniesGarage
@LonniesGarage 3 года назад
317
@johnathanferrell5057
@johnathanferrell5057 3 года назад
What heads are you running?
@LonniesGarage
@LonniesGarage 3 года назад
317
@agooser26
@agooser26 3 месяца назад
You don't need to heat up the harmonic balancer. That is a bad idea... it can ruin the front seal and ruin the harmonic ballancer itself. Not to mention, you will likely burn yourself. It is just not necessary.
Далее
What Are Crate Engines And Are They Any Good?
3:12
Просмотров 94 тыс.
Редакция. News: 128-я неделя
57:38
Просмотров 1,2 млн
6.0 LQ4 LS Motor Build Part 1 (Crank Install)
19:48
Просмотров 21 тыс.
Which head is best on your Gen III LS swap?
10:24
Просмотров 143 тыс.
Honing For The Home Engine Builder
8:16
Просмотров 734 тыс.
10 Minute Cam Swap!
10:17
Просмотров 917 тыс.
HOW TO: MAXIMIZE JUNKYARD 6.0L LS PERFORMANCE
18:30
Просмотров 947 тыс.
Это самая гигантская машина!
0:26
BYD U8 танковый разворот
1:00
Просмотров 2,4 млн