7016 Stick Welding Open Root

Подписаться 1,1 млн

Просмотров 114 тыс.

50% 1

Subscribe to my channel for more weekly videos.
goo.gl/T7d23Z
see the detailed article here goo.gl/hJM9eP
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
6010 and 7010 downhill has been the traditional way of welding pipe under API 1104 for many years.
But higher strength pipe is being used now that requires low hydrogen electrodes to be used for root, fill, and cap passes.
7016 is a low hydrogen electrode and is similar to 7018 but has less iron powder which makes it slightly easier for open root welds.
In this video, my friend Andrew Cardin shows his technique and settings for welding an open root using 7016 low hydrogen rod.
For even more options, check out my Amazon recommended products page at www.amazon.com...
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: goo.gl/AncnFa
Facebook: goo.gl/e2TtXC
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 169

@nastybasswelding 5 лет назад

“What tie-in?” 🤣 that’s one hell of a welder. Anyone would be more than happy to have him on payroll. Keep burnin-n-earnin! 👊🏻

@deekthefirst 5 лет назад

Hey Jody this takes me back to being a young welder back in the early 70,s, this was a procedure that I cut my teeth on, it was very common in the oil industry when I worked in the rig yards here in Scotland building jackets and deck modules for the North Sea, it was so good to see a young man using the same technique and discipline that I used for about 20+ years! coming now to the end of my career after nearly 50 years welding mainly in the oil, gas and nuclear industries I thought this technique was dead and gone so it was good to see it’s coming back as a “new” procedure!! This is why your channel is easily the best on RU-vid you cover everything!

@deekthefirst 5 лет назад

Weaver Cattle Company the E7016 over here in the UK is still a relatively cheap rod and it’s probably the “go to” rod here for most serious hobbyists, in industry here now speed is also the priority with most manufacturers preferring to use dual shield Mig or where size allows, bare wire Mig for rooting followed by dual shield Mig for hot pass and maybe two or three fillers followed by sub-arc using 3.25 or 4mm SD3 or SD3 .5 moly, material dependent, for heavy deposition. I remember in the 70’s working on ball valves for the Siberian pipeline and we rooted downhill or stoveing as we called it using fleetweld 5’s. Guess times have changed and nowadays money is king! Thanks for the comment it was very interesting to read.

@dorsetengineering 5 лет назад

@@deekthefirst You might be interested Derek, Jones construction recently did a new seawater injection pipeline down here at Wytch Farm, Tig root, orbital mig fill/cap. Vantage 400's on the back of a caterpillar tracked vehicle with a hiab dropping a habitat/tent over each joint...

@cherlie118 4 месяца назад

I worked in all the Scottish rig yards numerous times, always 6G or 6GR tests and sometimes you had to do both. Kishorn yard I had 6G and 6GR in stick, Inner shiled and dual shield which was 20p per hour per coding and it mounted up to a good amount of money back in the day as we were doing 7 twelve hour shifts. The coding money alone equalled what some people got for a wage.

@JTwelder. 5 лет назад

I’m a union boilermaker and we have a test that’s a 7018 all the way open route test on a 2 1/2” 3/8 wall tube. It’s a very hard test but you get the hang of it. You guys have some great techniques that will definitely help me next time I do my test update!

@swampratt36 5 лет назад

Goes to show ,after a lifetime on the pipeline , something to be learned every day even at my age ! Thanks guys . Matt

@blakebreckenridge 5 лет назад

I did my 6G test with 7018 open root and hated every minute of it, but I passed, I prefer 6010 but understand the need for low/hy roots in certain applications. Good job you guys.

@serbrat 5 лет назад

You may want to try Kobelco LB-52U electrodes for this kind of job. The soviets welded all their pipelines with these.

@daviddemoise3526 5 лет назад

I’ve attempted running a root with 7016 a couple times, amazing how easy he makes it look!

@randyharris1991 5 лет назад

Ive used 3/32 9018 H4 DCEN root and switch polarity for fill and cap and 309 L16 DCEP open root fill n cap. Such tricky welds to do!!lol

@CTmoog 5 лет назад

Awesome video guys! I always learn something here! Thank you!

@JC-un4bg 5 лет назад

I've seen you root with 7018 and it's impressive 👍 but the 7016 are so easy to root with . There are two different types though you want the ones with the black glossy slag known as specials. You can run the 2.5 as low as 55amp and 3.2 90amps no sweat . Go dcen 68-75 amp and listen to the noise coming out the back of the plate and just apply a little pressure . You will love them on a side note restarting can be a pain but just pinch the end of the rod . I like the orlinkeon ones

@michaelrogers8682 5 лет назад

I wish I could have seen this video yesterday. I took a open butt 6g with 7016. It passed but this would of helped. 👍🏼keep up the good content.

@bobmoffatt4133 5 лет назад

Very nice tutorial. Goes well with the hydrogen discussion about cellulose rods.

@weldingtipsandtricks 5 лет назад

thanks Bob

@dorsetengineering 5 лет назад

Filarc 56s root, pretty much the standard 7016 root this side of the pond... Nice to see you guys getting some arc time on a 7016. Nice rod to use for sure.

@dorsetengineering 5 лет назад

Jody, get Jonathan to give you some of the vac-pac filarc 56 I sent him over Christmas... See how you get on with them.

@kf8575 5 лет назад

Elga P47 is another common 7016 used by quite a few firms I've worked for too, although 56S are a better one for a root imho, p47 always seem to carry more slag

@TheIceRover 2 года назад

Filarc 36D is still a well liked rod in Scandinavia. Personali I don't care if it's a Filarc 36D or Esab 53.05 or Bhöler Fox. The all weld but for camping I like runig Phoenix special D and esab 53.00 special. They have a glass like slag. 7016 is the fist electrod all my Millrights apprentices have to pass on.

@sailor4life784 5 лет назад

Hi, Thats the position I usually use when doing repairs on my steel boat, when standing on the ground welding up...... I often use a 6010 root with negative on the stinger, and then the 7018-1 on top with positive electrode. I believe this gives a bit more elastic weld needed . Thanks for your time teaching us to make these experiments .... sometimes we get it right big smile :-)

@agentanderson1383 5 лет назад

its a pleasure to see real masters doing what they love. i love it.

@JesseWright68 5 лет назад

Great video, Jody. I'm not familiar with 7016 in the least, so I learned something. 👍

@supremewill777 5 лет назад

Looking forward to seeing future clips on this process. We dont use 6010 rods here in South Australia, 7016 is the common rod and is used to test for welders certification on pipe. I am currently practicing for this test. Thank you Jody this is very helpful !

@banjosambar 5 лет назад

william lockyer good luck bill. I recently completed my tix 3E,4&7 which pretty much covers all the welding we do. Jam that rod in tight mate and take your time. There is more than enough time on test day so don’t rush it and try not to long arc as porosity is a bitch to repair. Sing out if you want to use my numbers “amp settings”etc. doing 3E first really set me up for the pipe tests as you will be all over the electrode control

@dpinkerton7441 5 лет назад

WIA 16TC 2.5mm , way to go

@rypod28 3 года назад

@@banjosambar How are ya mate, I'm about to do the 3e exam in a week's time. The only test piece doing my head in is the 4g. I'm still undecided on the polarity and just the overall setup. I'm using 7016's, 2.5 gaps,s, and roughly 2.5 root face. 75 amps. what settings did you use mate?

@rypod28 3 года назад

How did you end up going on your 3e test? any tips please/ amps, polarity gaps. Thanks

@banjosambar 3 года назад

@@rypod28 hey mate, for my 4g overhead plate I ran same gap and land as you. Dc polarity, root pass 63-65amps, hot pass 93, fill passes 90 and down to 85 amps for the cap, 4 stringers for me, hope it helps mate

@doboziandras8935 5 лет назад

Two 250mm long piece of 6x60 mm flatstock, 30° bevel 1-1,2 mm land, 1,8-2,2 mm gap, vertical up, root with 2,5mm 7018-1 preheated DCEP 57-63 amps, and fill/cap with 2,5/3,2mm 6013 DCEN 75/85 amps. One coupon out of six, to make right in order to be a welder in Hungary. Sorry fo the nomanonthemoon system. Love your work Maan, I learn a lot from you.

@hansolsson3409 5 лет назад

Thank you Jody and Andrew.

@radarsonwheels1 5 лет назад

Thanks for all your content! Just ordered a tig finger set to support you

@johnbennett2259 5 лет назад

Thanks from the UK Jody, watched all your stick videos and learned a lot. Keep 'em coming.......

@samuelclark4525 5 лет назад

I love the attitudes of these two. Gosh I want to make full time money with my everlast welders. Getting there ... getting there.

@mr.joshua657 5 лет назад

Thank you for all the knowledge that you share Jody.

@mikenetherlin1209 5 лет назад

Thanks for your time guys. 👋🏻

@niftyfiftycampingadventure795 4 года назад

I concur with DCEN with this electrode. DCEP Is sticky and less control... I also found the ampage to be super sensitive on a 7016.. Very small sweet spot..

@robr4662 5 лет назад

I have learned so much from your videos over the years. Keep up the great work!

@paintball130 5 лет назад

weird rod... the iron workers at my job were using it today, figured i'd look it up. Never seen it used before.

@ianjoseph145 4 года назад

Hi Jody great video. Reminds me of the ABS test where you do a 6g sch 80 pipe using 7018 all the way few welders passed this test.

@shahrukhtikotikar7551 5 лет назад

cool and great video thanks God bless weldingtipsandtricks

@roeng1368 5 лет назад

Reminds me of when i did my 6g heavy pipe and plate years ago, the rods were supercito's, dc positive rod, grinding back all the time, feathering the edge. Don't think i could do it now.

@The_Bushman 5 лет назад

Hey mate, Always enjoy watching your videos, I've noticed in the USA you guys tend to favour 7018 Rods where as in Australia TC16 (7016) seem to be alot more popular than 7018. Like to see more 7016. cheers mate keep up the good stuff.

@bradleyschmidt9124 5 лет назад

I had a interview with Centuries Group, cool to see him work there!

@curtisbergeron5585 Месяц назад

Being an exclusively DH welder this process makes no sense but works if you do exactly as you all have described.

@jeffpugh4447 5 лет назад

Nice. Good to stay up on advancements. Look forward to next vid

@jdbrewer6638 5 лет назад

Great job guys!!

@weldingtipsandtricks 5 лет назад

Thank You JD

@mWaffen 5 лет назад

Outstanding & precise!

@davidspin5353 5 лет назад

Now just need to find some pipe in SW Florida to weld...

@jeffgrier8488 5 лет назад

Great video, looking forward to the next one!

@keithjurena9319 5 лет назад

Amazing inside reinforcement. Plus the slag flow inside. Really wets out on the weld. Nothing like 6010. Rutile?

@jimsvideos7201 5 лет назад

Andrew is good on camera too.

@jvmiller1995 5 лет назад

As always great video. I would like to see you do a review of at auto dark. It is a true color 4in amazing clarity. Shade 4 to 13 grind cut weld mode. Amazon 75 bucks with tax. Best purchase all yr. Seams high quality nice head gear better than average. But the lens is fast a freaking 4 in and clear i mean still dark but clear. That green tint is gone and grind mode is like a clear glass. The brand is Yeswelder amazon has the for like 68 bucks. No I am no sales person never heard of until a couple weeks ago. The netx cheapest is a eastwood 2x4 and not a clear color. Sorry for advertising in your channel but i thought you might want to share for the poor working bastard like me. thanks

@d_t_8__102 5 лет назад

Awesome video. I'm ready for the next one.

@darylt57 5 лет назад

another great video! thanks for what you are doing here!

@l.p.5259 5 лет назад

If using the Lincoln 16p rod, watch for this mysterious porosity that can occur. Does not show up on the inside or out, but in the middle of the bead....kobleco rods seem to be a waaaay better choice

@banjosambar 5 лет назад

L. P. I completed my structural plate and pipe tickets recently here in oz and we used kobelco electrodes for the tests. the mysterious porosity I found was caused by long arcing especially on stop/starts. We only use WIA 16tc electrodes at work which I find to be a lot easier to use. It’s great to see some controlled hydrogen electrode open root welding as over here we don’t use 6010 often if ever and always weld uphill.

@masterofnone 5 лет назад

Great tutorial guys.

@reideichner8597 5 лет назад

Great video and great information! Thanks guys!

@Toxile 5 лет назад

Hey I have some valuable information about welding a perfect 3/4 stacked bead with flux core on a part that is 14ft in diameter, with a bug-o system if this is helpful for any large production shops Pretty neat stuff, basically "machine-welding" but on thick metals (1.5 inch thick by 1 inch fillet weld, preheat and everything, you can even see the moisture on the preheat being driven away

@rolsonray 5 лет назад

12" branch and bellhole with 3/32 7016 & 3/32 7018 is a pipeliner test for fabrication...i do believe it is a Conoco Phillips procedure, not so much on the mainline, but this is a LoHy pipeliner fabrication test going around these days.

@johndunn9819 3 года назад

This almost looks easier to control than 6010. Is that the case or is it just the skill of the welder that makes it look that way?

@deathsicon 5 лет назад

Can we get a video to help with a job I recently did? working tig aluminum from inside a 3 way corner, it was about an inch of weld in each direction, getting into the corner was my major problem

@lxfguits 5 лет назад

I took a welding course a couple of years ago and that's exactly how we did root passes with 7018. I'm from Europe BTW :D I was using smaller electrodes and could practice a lot of starts and stops like that. As for welding DCEP 7016. Could it be that they call for it to not have to swap leads to fill and cap the same joint with 7018?

@telberwelding1365 5 лет назад

"Wow guys real nice; it's always great to challenge new dimensions keep the heat

@atkinssgaming2179 5 лет назад

looks like he flinched at 2:44 lol

@JC-un4bg 5 лет назад

There are to types of this rod you want specials they're the ones with the black shiny flux looks like glass

@carlosortiz9929 3 года назад

Where can i buy these rods? I have a test coming up in a couple weeks and would like to practice before i go test.

@Bane_Diesel 5 лет назад

Look at that welding shield lol

@metalslingr 5 лет назад

If you weld outside with the bright sun behind you, you’ll wish you had a pancake hood.

@luciusirving5926 8 месяцев назад

That's a cool rod, but I'll stick to 6011 and 7018 AC.

@JC-un4bg 5 лет назад

Yes yes yes yes yes best rod of all time they will run supper low amps in thin stuff dcen

@jerinmathew4371 Год назад

Can I weld root in ovel motion begin to end?

@tommyt2854 5 лет назад

Very cool, thanks for sharing. Do you see 7016 having a place in the fabricator's rod arsenal though, or would there be no benefits? Thanks.

@Whitebread0101 5 лет назад

Could you do a video of 6010 3f verticle down on a t-joint? I'm a student whose doing this so it would be greatly appreciated! Edit: Electrode could be 3/32

@shalom-yk3po4xs2l 3 года назад

Здравствуйте, покажите сварку трубы под 45 градусов.

@user-ds3im1je5b 5 месяцев назад

Very nice

@dave463 5 лет назад

Hey, man. I have a long question for you. We are a production company that manufactures steel and aluminum traillers for botanical nurserys and we mig weld (Steel) 3" Sch. 40 pipe to 3/8" x 4" flatbar, with the flatbar blinding the end of the pipe. (With the pipe being 10"-16" long) Alot of force is usually applied on these joints in a rocking motion and we are reconsidering the patterns and settings to use on this kind of joint. We only weld all the way around the outside of the pipe to the perpindicular, "blinding" flatbar. Do you have any suggestions for this kind of weld/situation?

@adwhit101 5 лет назад

Awesome info as usual!

@Darkstar1138 5 лет назад

Nice! thanks for this upload. amazing.

@MRTYREMULISHA 5 лет назад

How about that tie in hahaha nice guys ,stick is not dead !

@NSW 5 лет назад

Whats the differens between 7016 and 7018? Why don't do it all with 7018?

@diu4 5 лет назад

wanna know +1

@weldingtipsandtricks 5 лет назад

procedure specifies 7016 for root. dont know why

@motoz3939 5 лет назад

You should have more views on your 7018 open root.

@andycardin4986 5 лет назад

7016 and 7018 are the same EXCEPT for the addition of iron powder to the flux coating on 7018. Both are Potassium based fluxes.

@NSW 5 лет назад

@@andycardin4986 so it's faster with 7018? More deposit?

@Seputarwelding 5 лет назад

Wow

@LogicLearning 5 лет назад

Sar, you use blue Glass number Or best welding blue Glass I am waiting for your reply

@micbanand 5 лет назад

when you have made hundreds of these. and being good at it. no grindings needed at all. of course it happens. but rarely :)

@larrysperling8801 5 лет назад

great video guys. we really need to talk about that mask/helmet.

@weldingtipsandtricks 5 лет назад

we will definitely do that

@MrMillander 5 лет назад

I’ve noticed these becoming popular online, what’s going on?

@jpftwson54 5 лет назад

Its called a pancake hood and it's pretty standard for pipeline welding.

@MrMillander 5 лет назад

jpftwson54 cool don’t know much about pipeline thanks for the info.

@whitedoggarage 5 лет назад

@@weldingtipsandtricks yep, I'm in Australia, never worked in oil and gas here so don't know whether we use them or not, but see pancake hoods in the US stuff a lot and really would like to know more about them, advantages and disadvantages, they don't look like they protect your face that well.

@bishipc117 5 лет назад

Hey Jodie have a question for you. When you’re welding on a pipe do you have to clean the slag off from the inside. And if so how do you guys do in the piper. When they are 30 or 40 feet long. however long it is in the field because I just don’t know. Ps love the videos. I have become a much better welder just from watching your videos

@highkicker11 5 лет назад

yeah, that been bugging me too. so I googled it and a forum they said something about some put a pig in it. I think that would be a remote controlled kind of thing but I don't know. but I would also think you would not want slag in a fuel or oil pipeline when it's in use. as another response on that forum was that it gets filtered out later.

@bishipc117 5 лет назад

That would be really cool to see some robot that shoots down one of those tubes and cleans off the slag. Yeah I have to go online and check that out and see what they look like.

@jamier6742 5 лет назад

Biship c Has a lot to do with what application the pipe is being used for and what code and or specification the job applies to. Best case is to tig weld the root and hot pass. I understand you’re talking about being out on the field but it just usually boils down to application and code Requirements.

@jamier6742 5 лет назад

highkicker11 A big reason why they don’t want slag left from a root pass is because in time it will break down and mess up components downstream.

@RagsdaleCreek 5 лет назад

👍👍👍👍👍 Watching in Alabama

@riggsandmurtaugh7938 5 лет назад

so no more 6010 on pipeline or is that just what that job calls for??

@shaunatate 4 года назад

Passed my 3G & 4G tests thanks to you and ChuckE2019! Thanks a million!

@michaelvaillancourt9503 5 лет назад

I work for NEUCO in MA

@sylvestresanchez4848 5 лет назад

Awesome thank you.

@JC-un4bg 5 лет назад

2.5mm will run at 55amps on thinner steel

@slhasebroock 5 лет назад

Excellent Thank you!

@timoharkala7414 5 лет назад

Have you Esab stick welding machine?Everlast machines are now sold in Finland.Any experiences in class 250 amper stick inverter?

@dorsetengineering 5 лет назад

You want a 250a stick machine at a good price, buy Paton (Ukraine)

@amen_ali 5 лет назад

What electrode pole??

@otisspunkmeyer2010 5 лет назад

after 4 crater holes you are done they pull your papers go find a new job feathering is very important with all rods !!

@rikoanggoro9113 5 лет назад

Mr please turtorial stick welding vertikal up please

@zillic2 5 лет назад

Anggoro CH check his channel, it’s probably been uploaded years ago

@humberoestrada388 5 лет назад

Well done Tnks

@Intell3ctualProperty 5 лет назад

Where did Andrew attending welding school?

@andycardin4986 5 лет назад

Blackstone Valley Tech High School

@benjaminkinsey308 9 месяцев назад

🎉

@al..basrawi942 5 лет назад

شكرا لك👍🏼👍🏼

@alexanderromeroamaya9503 5 лет назад

Excelente

@FCP32 5 лет назад

Can you tell how to restart with out feathering it in. My teacher won't let me use a grinder?

@MRTYREMULISHA 5 лет назад

use a file or a slag rack aka old power hacksaw blade to feather your stops and starts, if he dose not let you feather lo hydrogen stops and starts you may want to go to a different school. if your using 6010 or 8010 then thats achievable buy leaving a slight key hole when you stop.

@kf8575 3 года назад

If you're doing lowhy roots and your "teacher" wont let you feather stop/starts, ... then youd be better off finding a better person to learn from, as your "teacher" doesnt know what theyre doing

@FCP32 3 года назад

@@MRTYREMULISHA thanks. I figured it out.

@FCP32 3 года назад

@@kf8575 thanks for the info.

@MRTYREMULISHA 3 года назад

@@FCP32 Good to see, i passed my lo hy test 7016 2g and 5g on std wall pipe. It took me two go's to pass but the first one i busted was a defect in the cap pass on the 5g.

@richardhaughey532 5 лет назад

About dam time

@jarencook9291 4 года назад

👍

@chrisplayz253 5 лет назад

Do u need a machine with a high OCV to run 7016s

@weldingtipsandtricks 5 лет назад

I dont think so. its very much like a 7018

@chrisplayz253 5 лет назад

@@weldingtipsandtricks thanks appreciate the reply :)

@kf8575 3 года назад

Just need enough voltage to hold a real tight short arc, literally short enough for the flux on the rod to be scuffing the preps

@jeremymatthews5169 5 лет назад

whats going on with the audio on this video

@lorrainebayford177 5 лет назад

What's with that style of helmet. ????

@garyteague4480 5 лет назад

Why 7016 and not 7018 ...?

@CarlosMorales-jd5hb 5 лет назад

Euro style

@JorgePerez-fy6hn 5 лет назад

that will be the end of the old pipeliner?

@l.p.5259 5 лет назад

Jorge Perez naaaaah, way to slow, and not “as good”. Some bone head 23 yr old engineer will try, again, to implement this in-service procedure to mainline welding and fail,again. Have been taking this test for 12 yrs now and have only used it for live work. One company started to mainline with it, but came to senses at the “meeting of the minds “ that’s what 0% field experience gets us nowadays

@kf8575 3 года назад

No need for lowHy roots on pipelines, they're only standard wall low pressure, doesnt warrant high spec welds like lowHy or tig root. This is more for heavywall, high pressure, or butts under constraint

@diu4 5 лет назад

Kobelco LB 52 3.2MM RODS?

@andycardin4986 5 лет назад

Lincoln Pipeliner 7016 2.5mm