'92 Mustang Fox Body Coupe Intro! No traction! Welding Torque boxes! Spherical bearing install!

Подписаться 2,4 тыс.

Просмотров 3,4 тыс.

50% 1

Watch the end! Let's dive into this Mustang project! In this video, I give a brief overview of the project, open some parts, weld up some cracks in the torque boxes, install spherical bearings in the rearend from UPR, and we take it for a very traction limited drive down the road! This is going to be a fun project, so Thanks for hanging out for the build. This will be a show quality build that will take me back to my teenage years!
Current mods...
5 lug conversion with Yukon axles
17x9 and 17x10 wheels with 255/40 and 275/40 Nitto 555's
306, E303 cam, ported e7 heads and ported Edelbrock intake
Accufab throttle body
equal length headers, 2.5"exhaust
underdrive pulleys
4:10 gears
Coming up...
UPR pro street rear suspension
new lowering springs and shocks
front suspension rebuild
stereo upgrade
new paint
much more!!!
Email: phillipshotrodgarage@gmail.com
Facebook: Phillip's Hot Rod Garage
Instagram: ‪@phillipshotrodgarage‬
#fox #foxbody #foxbodymustang #ford #coupe #notchback #wildstrawberry

Авто/Мото

Опубликовано:

5 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@miketitus3592 5 месяцев назад

Excited to see the progress-

@phillipshotrodgarage 5 месяцев назад

Thanks! more videos are coming!

@brucegoolsbyjr8954 5 месяцев назад

Subscribing for this project it’s my dream car

@phillipshotrodgarage 5 месяцев назад

Awesome, thanks for hanging out. More videos coming soon!

@SpankysHotRodsandCustoms 5 месяцев назад

Looking forward to seeing what you do with this one! Thanks for sharing -Spanky was here

@phillipshotrodgarage 5 месяцев назад

Thanks! It’s going to be a nice one!

@1fknhpycmpr355 5 месяцев назад

Well, i am here for the model A videos, but i am going to watch the mustang stuff too! I've never owned one, but i helped a friend of mine who has a bodyshop, to get some parts for is customers fox body convertible. The quarter window was a real pain in the butt to find, but i got it from ebay. I guess 60's Mustangs are a bit easier to mess with. Looking forward to see the next video!

@phillipshotrodgarage 5 месяцев назад

Thanks for checking it out. These are fun little cars, and a lot easier to work on than the early Fords. But, the Model A project continues, and I’ve got some good content on it in the works! I’ll be back in a few days with another video!

@ericsjalopyshop9992 5 месяцев назад

Best mustangs made. Love it !

@phillipshotrodgarage 5 месяцев назад

They are! Thanks buddy!

@carlg500ci7 4 месяца назад

New sub.cant wait to see the build .

@phillipshotrodgarage 4 месяца назад

Thanks for the sub! I’ve been working and have new videos coming soon!

@dakotafisher6874 3 месяца назад

Missing you!!!

@phillipshotrodgarage 3 месяца назад

Thank you! I’ll be back in a few days!

@goptools 5 месяцев назад

Hi Phillip. The Mustang is in really good shape for being 32 years old! Where I am at, up north in the rust belt, you won't find one that clean unless it was garage kept and not driven in the winter. And it would be a rare find. I like your plans for the car. Fix what's worn out and upgrade it where it is needed. Pretty sweet! Looking forward to the rest of the build. -mike

@phillipshotrodgarage 5 месяцев назад

Thanks for checking it out! There are some areas of these cars that are prone to rust, and this one has one place that I am going to have to repair. It's not too bad, all things considered. But, I have seen a few of these cars rusted away beyond repair. It's going to be fun!

@elliottbutts153 5 месяцев назад

I’ve got a 91 that I just drove to work this morning. Got a couple short videos on it. They are fun cars. I’ve got 3.73 gears in mine. Sounds like they might have put 4.56 gearing in yours if it turning 4,200 rpm at 60 mph. At 60 mph with mine I’m at 2,200 rpm, in 5th gear. 70 mph I am exactly at 2,500 rpm Subbed so I can follow your progress 👍🏻

@phillipshotrodgarage 5 месяцев назад

It wasn't turning 4200, The tach is goofy and needs to be fixed. That's something I'll be doing at some point. It was turning up pretty high though, and I suspected it had a 4 cyl T5 because of the rpm it was turning in overdrive. I pulled the transmission out today, and sure enough, it was a 4 cyl T5. I checked the rear ratio while I was under there and it's 4.10. Thanks for the sub... more videos are coming!

@elliottbutts153 5 месяцев назад

@@phillipshotrodgarage Gotcha 👍🏻

@bernierezny8156 5 месяцев назад

Remind me of high school

@phillipshotrodgarage 5 месяцев назад

Right! I bought my first one the week of graduation! It's like old times for me!

@BoxcarsGarage 5 месяцев назад

Eric on film...it's been awhile! "Official introduction" check. Looks like a fun project.

@phillipshotrodgarage 5 месяцев назад

Eric done showed up and helped me get it done again. Gonna be fun playing with this car. It’s much easier than those old rusty ones LOL

@raymondantonio4145 5 месяцев назад

Well Phillip, do you feel 16 again? Lol I can tell that’s going to be a fun car!

@phillipshotrodgarage 5 месяцев назад

Well, of course I do! I think it's going to be fun. I look forward to cruising it to a few shows this summer. it will give me something to ride while I continue on my other builds.

@raymondantonio4145 5 месяцев назад

Yes of course it will and remember it will be faster than a speeding ticket only if you don’t get caught! Lol

@phillipshotrodgarage 5 месяцев назад

I plan on staying out from under the radar. 😀

@raymondantonio4145 5 месяцев назад

Haha! That a boy! I had noticed the mufflers on the car now, looked like home made jobbies! No wonder they were loud! Have a great rest of the week Phillip!

@phillipshotrodgarage 5 месяцев назад

They aren't homemade, they are made by the company "Spintech". It's a love or hate thing. Some people love them, and some people hate them. I personally hate them LOL.

@ICONBADGTA 4 месяца назад

Mustangs came from the (FACTORY) with symmetrical port heads, headers, forged pistons, true dual exhaust, a bulletproof rear, and 4 link suspension basically, you have (NOTHING) to complain about! Try a F-BODY from 82-92.. Get back to me..

@phillipshotrodgarage 4 месяца назад

I’m not complaining about a thing. But I did get my first speeding ticket at 16 years old on a red 84 T-Top Z28. I’ve wheeled those around too.

@jimmymccormick142 5 месяцев назад

The best factory race car ever built more Fox body mustangs racing than any other car ever built just a shame the Chevy boys can't seem to find a car to put their junk in so they use our mustangs and turn it into a jackass when its a stallion from the factory

@phillipshotrodgarage 5 месяцев назад

They sure do run well at the track don't they. There's not much else out there that can compete with a mustang with stock suspension. They are easy to make fast!

@carlstallins4067 4 месяца назад

Needs wing really bad 😢😢😢

@phillipshotrodgarage 4 месяца назад

Do you like the way a wing looks on a notchback?

@briansaier4929 5 месяцев назад

Real muscle cars have 5 lug wheels lol

@phillipshotrodgarage 5 месяцев назад

Oh, I forgot to mention in the video, this car has been converted to 5 lug! LOL it has 5 lug wheels on it HAHA!

@briansaier4929 5 месяцев назад

@@phillipshotrodgarage good I seen so many of them shear the lugs off

@phillipshotrodgarage 5 месяцев назад

it has aftermarket axles also, which is another weak point on these cars.

@briansaier4929 5 месяцев назад

@@phillipshotrodgarage sweet

@eustolioramirez2955 5 месяцев назад

Not my cup of cake , lost my interest

@phillipshotrodgarage 5 месяцев назад

Are you following my model A build? There's more coming on that car in the next video.

@eustolioramirez2955 5 месяцев назад

@@phillipshotrodgarage yes, I just don’t like videos that have to do with people changing parts or up grade parts , I view that as waste of time but when you are doing an amazing job with the coupe.

@phillipshotrodgarage 5 месяцев назад

So, you like the fabrication work? I like to watch that too. On this Mustang, I’m going to go through the paint and body process and paint it on the channel. That should be interesting to watch!