Door rust repair PART 3. Hammering on a patch panel! Model A Ford Hot Rod Build

Подписаться 2,4 тыс.

Просмотров 2 тыс.

50% 1

Door repair continues on the HEMI powered Special Coupe Hot Rod build! In this video, I get the door sand blasted, weldup the inner door patches, and hammer on the outer skin. I'm making progress!
Welcome to my Channel! I had another great week in the shop beating and banging on my Hemi powered Model A Special Coupe Traditional Hot Rod build.
There's still plenty to do! Subscribe and click the notification bell so you don't miss a thing! Please leave a comment, and thanks for watching!!
Coming up soon on this project... More trunk repair, chassis fabrication, finishing the rear subrails, fitting oversize door pins, rebuilding door latches, more rust repair on the doors and quarter panels, and much more!
Thanks for watching me bring this old 1928 Ford Model A Special Coupe back to life!
Need my address? E-mail me!
E-mail: phillipshotrodgarage@gmail.com
Visit me on Facebook: / phillips-hot-rod-garag...
#patchpanel #traditionalhotrod #builtnotbought #modela #coupe #hemipowered #rusty #fabrication #cutting #grinding #metal #ford #old #hotrod #stud #welder #rust

Авто/Мото

Опубликовано:

15 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@1fknhpycmpr355 6 месяцев назад

Finally a new video! Nice progress again. Keep them coming!

@phillipshotrodgarage 6 месяцев назад

Yes sir! More to come!

@billd.akaevylaz754 6 месяцев назад

Looking nice Phil!

@phillipshotrodgarage 6 месяцев назад

Thanks!

@tedhewitt4299 6 месяцев назад

You do nice work Phil.

@phillipshotrodgarage 6 месяцев назад

Thanks, I appreciate that!

@SpankysHotRodsandCustoms 5 месяцев назад

Nice job Philip!

@phillipshotrodgarage 5 месяцев назад

Thanks buddy!

@geoffreymills9932 6 месяцев назад

That car is coming together really nice, great job Phil

@phillipshotrodgarage 6 месяцев назад

Thank you!

@bobgaylord8883 6 месяцев назад

Looks great, Phillip ! You're doing a real nice job on it.

@phillipshotrodgarage 6 месяцев назад

Many thanks!

@goptools 6 месяцев назад

Hi Phillip, the door is looking good with the new skin on it. Should be good for another 90 years when you are done!

@phillipshotrodgarage 6 месяцев назад

Thanks! I hope it is! I'll leave this car to my son. Hopefully, he will appreciate the quality of my work and it will last him a lifetime!

@goptools 6 месяцев назад

Nice!@@phillipshotrodgarage

@olmoe1167 6 месяцев назад

Looking good, Phillip.... That copper backer really helps control blowouts while repairing holes, especially in thin metal.... Love the Model A videos, But Also looking forward to the Mustang.... Stay warm, my friend....

@phillipshotrodgarage 6 месяцев назад

Yes sir! Thanks for the support!

@raymondantonio4145 6 месяцев назад

Very nicely done Phillip, can’t find any faults there at all. That’s going to be a nice solid door once your all done. I won’t tell you what the temperature is at where I am but hoping spring and warmer weathers not too far away. Keep warm and have a great rest of the week!

@phillipshotrodgarage 6 месяцев назад

It's a lot easier to get work done when it's warm! I love spring time! Hope this cold moves on through pretty quick. Have a great remainder of the week yourself friend!

@BoxcarsGarage 6 месяцев назад

Solis repair brother...nice job! Man I gotta sandblast more.

@phillipshotrodgarage 6 месяцев назад

I don't know Larry, you might not like the way your stuff looks without the rust LOL!

@BoxcarsGarage 6 месяцев назад

@phillipshotrodgarage it's all that is holding mine together!

@phillipshotrodgarage 6 месяцев назад

There's nothing worse than sand blasting, and having nothing left. That might be what happens when I blast my quarter panels HAHA.

@521farmer 6 месяцев назад

Awesome Phil man looks great keep it up ya got my vote to darn cold here right now minus 44 without the !!! Wind later from Canada 🇨🇦 SK later 😊

@phillipshotrodgarage 6 месяцев назад

That's just way too cold for me! I went to Canada once. It was in January of 2002. I went to Woodstock Ontario, and it was the coldest I've ever been!

@521farmer 6 месяцев назад

@@phillipshotrodgarage ya well next week minus 4 can't keep up keep up the good work on your doors what gauge you use to finish them off ? Thanks again later

@phillipshotrodgarage 6 месяцев назад

I'm not sure the gauge. I bought the panels from Howell's sheetmetal, but I haven't measured them.

@tonydaniels3093 6 месяцев назад

cold its 4.4 degrees here in the great midwest

@phillipshotrodgarage 6 месяцев назад

That's ridiculous! it's going to be 17 here tonight which is very unusual for us.

@tonydaniels3093 6 месяцев назад

@@phillipshotrodgarage it was -12 saturday night here, had to throw a 2nd blanket on the bed

@phillipshotrodgarage 6 месяцев назад

No sir! That's not for me! We would have been under a second blanket long before -12 in Alabama. We aren't used to that LOL.

@jeffreyhecht6512 6 месяцев назад

No doubt you had a good reason but why did you sand blast the whole door?

@phillipshotrodgarage 6 месяцев назад

I am going to go ahead and repair the other side the same as I did this one, then blast them both at the same time. Then I'll be able to take them both into the paint booth and epoxy them freshly blasted and clean. I just hate to blast and clean metal and leave it unprimed for long periods of time. I figured with the time this door with be in bare metal while I'm repairing the other side, It would probably need to be redone. So, blasting both at the same time so I can go straight to primer is the main reason why I only blasted the repair area. I like to use phosphoric acid to keep metal from rusting while I'm working on it, but its not recommended to use it under epoxy, so I need to leave it bare.

@briansaier4929 6 месяцев назад

Where ya been ?, Eastwood a sponsor now ?

@phillipshotrodgarage 6 месяцев назад

Been slacking LOL!

@phillipshotrodgarage 6 месяцев назад

No, Eastwood isn't a sponsor, but they need to be LOL! I was just showing what I was using, and I was using what I had laying around. I started to use some Rustoleum HAHA!

@jeffreyhecht6512 6 месяцев назад

I had the same issue with Eastwood's rust encapulator lid, I ruined it and had to get a new can for the leftover paint.

@phillipshotrodgarage 6 месяцев назад

@jeffreyhecht6512 My guess is they put this deep lid on there so the cans can be shipped without risk of the lid popping off.