Тёмный

A First Look at the Creality CR-10 S5: The Biggest CR-10 3D Printer 

Mighty Jabba's Collection
Подписаться 32 тыс.
Просмотров 92 тыс.
50% 1
ВидеоПоделитьсяСкачатьДобавить в

This is a first look at the Creality CR-10 S5 3D printer, the largest member of the CR-10 family. It was provided to me for review at no cost by GearBest.com. Below you can find links to this printer as well as the CR-10 S4, the regular CR-10, the CR-10S, and the CR-10 Mini, plus coupon codes to reduce the prices. Below that are links to the models I printed in the video.
GEARBEST PRINTER LINKS:
*CR-10*
CR-10 US PLUG BLUE: bit.ly/CR10USBLUE
CR-10 EU PLUG BLUE: bit.ly/CR10EUBLUE
CR-10 US PLUG ORANGE: bit.ly/CR10USORANGE
CR-10 EU PLUG ORANGE: bit.ly/CR10EUORANGE
_________________________________________________
*CR-10S / Upgraded CR-10*
CR-10S BLUE US PLUG: bit.ly/CR10SUS
CR-10S ORANGE US PLUG: bit.ly/2OJUC2P
CR-10S BLUE EU PLUG: bit.ly/CR10SEU
CR-10S ORANGE EU PLUG: bit.ly/2GpHHz9
_________________________________________________
*CR-10 S4 /Enlarged CR-10*
CR-10 S4 US Version: bit.ly/CR10S4US
CR-10 S4 EU Version: bit.ly/CR10S4EU
_________________________________________________
*CR-10 S5*
CR-10 S5 US Version: bit.ly/CR10S5US
CR-10 S5 EU Version: bit.ly/CR10S5
_________________________________________________
*CR-10 Mini*
CR-10 Mini US Version: bit.ly/2nUha7u
CR-10 Mini EU Version: bit.ly/2nUBIgd
_________________________________________________
*CR - X*
CR-X US Version: bit.ly/crealitycrx
CR-X EU Version: bit.ly/crealitycrx-eu
_________________________________________________
*LD-001 DLP Resin Printer*
Creality LD-001 US Version: bit.ly/creality_ld-001
Creality LD-001 EU Version: bit.ly/creality_ld-001-eu
_________________________________________________
Models I printed for this video:
Jabba the Hutt Idol: www.thingiverse.com/thing:144...
Owl Statue: www.thingiverse.com/thing:18218
Stranger Things Logo: www.thingiverse.com/thing:174...
Chromatic Vase: www.myminifactory.com/object/...
Eiffel Tower: www.thingiverse.com/thing:22051
Aria the Dragon: www.thingiverse.com/thing:600550

Развлечения

Опубликовано:

 

5 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 123   
@Elitesniper257
@Elitesniper257 6 лет назад
For your tower, tweak your retraction settings and also the temperatures and increase the part cooling fan speed so it cools your bridges faster of mod it with some blower fans. Also if you have time, print a new part cooling fan deflector so it hits the hot plastic a bit better. I would say that you print the bridging, temperature, and calibration models also to tweak it all so its perfect. Great video btw!
@nerys71
@nerys71 6 лет назад
dude that is amazing. to solve the "flimsy" either in your slicer or on the printer when your done your solid bottom layers crank up the flow rate to 1.25 nice and thick. as for the seperations. for some things you can't use .24 layer. deviation from vertical will cause seperation. you need to lower the layer height. you accounted for this in the jaba with more perimeters. the more deviation from vertical the more perimeters you need OR the lower the layer height you need.
@3dprintwiz378
@3dprintwiz378 6 лет назад
Hi nice informative vid, just wanted to ask if the size of the heated bed does not cover the whole build plate? I am planning on buying one but I am apprehensive on the build plate issue?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Yes, it only has a partially heated bed. I only print in PLA so I'm not really sure if I even need the heated bed at all, but for some people this will be a disadvantage. You can get aftermarket heaters, but that's more money. My final review of this printer will be coming out very soon (within a day or two) so maybe keep an eye out for that.
@H0wlrunn3r
@H0wlrunn3r 6 лет назад
Love your Republic Commando helmet :D
@ethanpatchen4113
@ethanpatchen4113 5 лет назад
You should print the Java things in Vase Mode or in Cura, under special settings you can pick "print outer contour" or something like that. It prints much faster.
@3dprintwiz378
@3dprintwiz378 6 лет назад
Oh no, I thought my CR10 was big and you show me this one, now I'm insecure and wanting to buy the S5. I do hope they put a larger heat plate, one that covers the whole bed. Thanks for the vid man.
@CMB76
@CMB76 6 лет назад
Every time I watch your 3D printing videos is makes me want to give it a try. I'm sure I would screw it up somehow though. Is there a Jabba's Palace model on any sites? That would be cool to print up nice and big.
@GeorgeOu
@GeorgeOu 6 лет назад
I have successfully printed up to 1.2mm thick walls using a 0.4mm nozzle in vase mode. It actually works pretty well and the walls are MUCH stronger that way. I also don't get the ugly start-end on every layer.
@timmc6009
@timmc6009 6 лет назад
You got another printer!?!? That is HUGE!!!! I want to see a jumbo rancor skull:). If your looking to move one of those printers lmk ;)
@rondlh20
@rondlh20 6 лет назад
Very impressive!
@bgrant1512
@bgrant1512 5 лет назад
Where did you get the extension cables? Id like to reposition my control and cant find these.
@prinz1234567890
@prinz1234567890 6 лет назад
You could really put a 0.8mm nozzle on that thing. vasemode would work great and you get shorter print times!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
kgj Yes, I actually have one that I ordered since making the video. I just have to find some time to experiment with it. I think a larger nozzle makes a lot of sense with these bigger printers
@truetech4158
@truetech4158 6 лет назад
Mighty Jabba's Collection suppose it's entirely possible to also print up a ceramics terra cotta extruder, or a airhempcrete version of that as well. That might lead to developing a 3d printed housing section to Thingiverse lol. Happy printing.
@maayaa77
@maayaa77 6 лет назад
Hey Jabba - could you help me understand why the right hand Z axis would be drifting higher and the X axis becomes offset - like the nema steppers are out of sync
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I'm not really sure. You could try asking in the CR-10 Facebook group if you haven't already.
@JPWestmas
@JPWestmas 6 лет назад
Hey! Thanks for your channel. Have your ever printed several small objects on a single 400 mm (cubed) bed at once? Assuming you are always near by your printer. . . do you find that faster than printing one small object at a time?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Jason Westmas It’s probably a bit faster since you don’t have to restart the print each time, although with 3D printers in general I find that printing lots of things at once can sometimes yield lower quality than doing them separately, and if something fails they all fail. There’s also the option of having your slicer print them one at a time instead of doing one layer for all objects and then doing the next layer for all objects, etc. In that case you do need to be careful of the order so your nozzle doesn’t hit things you have already printed
@Daclaem
@Daclaem 6 лет назад
3 consecutive days of printing without issues t ells someting about the reliability of this machine.
@Hotmustardgas20
@Hotmustardgas20 4 года назад
How big is the whole printer once it's put together. I'm trying to see how much room I need for it
@fluffybunnyz
@fluffybunnyz 6 лет назад
I have the S5, your going to want the keenovo heater from tiny machines to heat the whole bed. Full 500x500 heated bed. Also turn on the manual mesh leveling to compensate. But I love my unit!
@bilalakyuz9866
@bilalakyuz9866 6 лет назад
what do you mean with manual mesh leveling?
@fluffybunnyz
@fluffybunnyz 6 лет назад
Mesh leveling can be turned on in the firmware. The new s5s does not need a boot loader to allow editing of the firmware. So I would highly recommend (if you know what your doing) to edit marlin, and upload the new firmware with mesh leveling and 4 points. What this will allow for, is issues with the bed itself being unlevel, and still getting perfect prints. Like auto leveling, only you take the 20 seconds it takes to make the adjustments.
@bilalakyuz9866
@bilalakyuz9866 6 лет назад
Now i am really interested. Unfortunately i am not at all experienced with editing firmware. Did i understand it right, that i could basically get the same effect as ABL if i edit the firmware? Are there any guides to do this? Big thanks in advance
@fluffybunnyz
@fluffybunnyz 6 лет назад
Exactly right. An abl or a BLtouch will do this automatically. I don’t mind taking the 30 seconds to do this manually. I’m not sure if there are many guides out there... and I may piss off those trying to make money off folks creating these devices. But, firmware is free, so is knowledge, and you should only get these devices if you want them.... not because people don’t tell you about the other solutions. I’m sure I’ll make a video on my channel at some point. Feel free to subscribe and I’ll push one out. Or if you have an S version I’ll just put the firmware someplace.
@bilalakyuz9866
@bilalakyuz9866 6 лет назад
fluffybunnyz well. Im definetely gonna subscribe and wait for that video. Weird that no on has ever mentioned this before. Thinning about it slightly makes it blatantly obvious that it should be pretty simple to do... Thanks for the heads up
@carbide1968
@carbide1968 6 лет назад
You might consider getting a larger square piece of wood and just lay it on top of that rectangle piece so you can turn it forwards and remove the extensions and put filament roll on side like normal.
@Locoboo9
@Locoboo9 6 лет назад
Awesome derp
@Riztech101
@Riztech101 6 лет назад
My next printer will hopefully be the cr-10s5
@xxxxzorroxxxx
@xxxxzorroxxxx 6 лет назад
Very cool
@aaronramly1705
@aaronramly1705 6 лет назад
thank you for the review Mighty Jabba's Collection.really help a lot. do the coupon code have expired date ? i want to buy it next month
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I think it may expire at the end of the month. But you can get back to me when you decide to buy and I can check if there is another coupon at the time
@aaronramly1705
@aaronramly1705 6 лет назад
thank you so much Mighty Jabba's Collection ! very nice.will get back to you soon
@ssuperdave100
@ssuperdave100 6 лет назад
Hi there, which 3d printer is the best for making an R2 unit? I'd most would like to avoid the warping process. Thanks. David
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+ssuperdave100 Any of the CR-10 models would work, since they have heated beds and are big enough for all of the pieces. I plan to use them for this kind of project moving forward.
@ssuperdave100
@ssuperdave100 6 лет назад
Thank you for getting back to me. So the CR10 S5 does not have bad heat issues? Thanks again! I want to take the same path as you in regards to possibly starting this project.
@prettykitty8974
@prettykitty8974 6 лет назад
Hi there, could you please share the temp details for all the prints.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
For all of the prints that were in colors (not white) I used MakerGeeks PLA filaments, which have a recommended nozzle temperature of 235 degrees (that's quite hot for PLA, but it seems to work). I think I just used 200 or 210 for the included white filament. The bed was set to 60 degrees and I used glue stick to help with bed adhesion.
@mdanieltech
@mdanieltech 5 лет назад
Thanks for the video very interesting and great info! Question I haven't found anything out there about the "footprint" of the machine I know it's 500mm but I'd like to know the size of the printer. I have a counter-top that I'm thinking of putting it on but unsure if it will fit can you tell me the width of the machine or the width of that shelf you have it it on? Thanks!
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
Sorry for the delay in getting back to you. I have misplaced my tape measure, but according to TinyMachines (link below), the total occupied area (including the control box) is 32" width x 40.5" length with the table extending 6.5" beyond both front and rear. That sounds about right. It's really large. tiny-machines-3d.myshopify.com/products/creality-cr10s5
@mdanieltech
@mdanieltech 5 лет назад
@@MightyJabbasCollection Thank you for writing back, and no problem on the time. I bought the printer, would you recommend any upgrades right off the bat?
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
I would print the heat bed adjustment knobs and also some sort of strain relief for the heat bed cable. Unfortunately the one I used was from a Facebook group a while back and doesn’t appear to be publicly available, but hopefully there is something on Thingiverse made specifically for the S5. I have literally done nothing else to my machines in terms of mods
@brentcrowthers4243
@brentcrowthers4243 6 лет назад
You know what would be really cool is some scenery for some figures like the outside of a building from some Star Wars scene
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+Brent Crowthers That’s a great idea! Not sure if such a thing exists now although I have seen people print things like buildings and scenery for wargaming
@1800Supreme
@1800Supreme 6 лет назад
Please use 0.8mm nozzle for vase mode
@thediscoman2001
@thediscoman2001 3 года назад
does this come with dual z endstops
@Rawshade
@Rawshade 3 года назад
This printer is amazing and worked so good for a while but Ive recently been having issues with build plate adhesion what settings are you using for the cr10s5. Do you have a shareable profile of settings for cura? Or just a document to help get back on track? Thanks mighty jabba youve done great vids and prints
@MightyJabbasCollection
@MightyJabbasCollection 3 года назад
I don’t use Cura, but I feel like adhesion problems are probably more to do with physical things like bed level and not using glue stick, rather than software settings
@Rawshade
@Rawshade 3 года назад
@@MightyJabbasCollection thanks for the prompt response, i was doing great no issues lost my touch. Ill check those physical things thank you very much
@MightyJabbasCollection
@MightyJabbasCollection 3 года назад
Bed level in particular is hard on this machine
@Rawshade
@Rawshade 3 года назад
@@MightyJabbasCollection i installed a auto bed level kit when i first got the machine its been amazing lol i did not want to deal with that headache
@theGermanPrintingNerd
@theGermanPrintingNerd 6 лет назад
just turn it around and put the spool holder on the Control box
@mehmetucan1613
@mehmetucan1613 Год назад
hello everyone, I'm a cr10s5 user, I mostly print industrial products. but I couldn't find the maximum printing weight for cr10s5 anywhere. I'm printing 5600gr now. Can anyone know if the y axis can carry it?
@Science3D
@Science3D 5 лет назад
how the plastic adhere to the glass? do you need any product to help the adhesion or is it ok like that?
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
Science 3D The heated bed is sometimes enough to make it stick but to be safe I usually apply some glue stick. There are also print surfaces you can buy
@TheEthanhunt654321
@TheEthanhunt654321 6 лет назад
is that possible to use this model to print 1/6 bvs batmobile?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I suppose so. I don’t know anything about it though. Is it an existing model?
@cadthelegolad3576
@cadthelegolad3576 6 лет назад
I've got zero experience with 3D printers. What software do you use to create models? Where do you get some of the models from?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
There are a number of sites like Thingiverse.com that have free models you can download and print, and some are also available for sale elsewhere. You can use 3D modeling software to create your own models, but this can be tricky.
@JF32304
@JF32304 5 лет назад
I use Autodesk Fusion 360. It's incredible! User it for 3D printing and CAM for my CNC.
@stopmotionframes8220
@stopmotionframes8220 6 лет назад
Can you review the rest of the LEGO jabba related sets please?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Sorry for the delay on that. I do have it planned, but I got kind of distracted working on my R2-D2. Hopefully the next one will be done within the year...
@VenkateshDhara333
@VenkateshDhara333 6 лет назад
My CR10 S5 has so many vibrations wavy patterns were printing on shells please help i could get even one sucessfull print
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Venkatesh Dhara You might try checking out the CR-10 Facebook group since it is difficult to troubleshoot in RU-vid comments.
@jansieber1503
@jansieber1503 6 лет назад
When will you upload a final review?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
This is the final review: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cdxx186jOLA.html
@mohammedalnuaimi5417
@mohammedalnuaimi5417 6 лет назад
Does cr-10 s5 have finish filament deduction??
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Mohammed alnuaimi It has filament detection, yes
@armoredcharlie301
@armoredcharlie301 6 лет назад
Would love to see a super mario bullet bill made from this printer full scale!!!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
That would be cool! I'll have to look into how long that would take though. When you get this large things start to take a LOT of time and filament. Have you seen the one that Nerys did on the regular CR-10? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9JBL3Dunev8.html
@armoredcharlie301
@armoredcharlie301 6 лет назад
Mighty Jabba's Collection wow!!!!!! Thats huge holy crap and thats the normal cr10!!!!! Just wow!!!!!! Thats an awesome print!
@oscaranderson1822
@oscaranderson1822 2 года назад
Did I really need this big of a printer. No not really but it is really cool
@_MoRZiLLo50
@_MoRZiLLo50 6 лет назад
Huge!!! :)
@mohammedissa9448
@mohammedissa9448 6 лет назад
can you please share a link to that Dinosaur print? looks amazing!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Mohammed Issa It’s the MakerBot T-Rex. I talk about it in my review of the CR-10 S4 and there is a link there. It’s available for free on Thingiverse, although I increased its size
@brentcrowthers4243
@brentcrowthers4243 6 лет назад
How well do you think this machine would make a voltron statue?
@drumbum7999
@drumbum7999 6 лет назад
You should have printed that giant jabba in vase mode
@nickorr1880
@nickorr1880 6 лет назад
Where could i get shelving like that? I am having the same issue with space in my room.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I got them at Lowes
@JF32304
@JF32304 5 лет назад
It's nothing special... Home Depot or Lowe's.
@GeorgeOu
@GeorgeOu 6 лет назад
I read this thing only has a 300x300mm heated bed, is that true?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
George Ou That’s right
@playgrounddolls7766
@playgrounddolls7766 4 года назад
Can You please tell 8:08 how much it weight? Can you easily breake it ?
@MightyJabbasCollection
@MightyJabbasCollection 4 года назад
Not sure about weight but it is pretty sturdy
@playgrounddolls7766
@playgrounddolls7766 4 года назад
@@MightyJabbasCollection i mean how much is self cost(filament useage)
@MightyJabbasCollection
@MightyJabbasCollection 4 года назад
I think it's between 1.5 and 2 kg
@playgrounddolls7766
@playgrounddolls7766 4 года назад
@@MightyJabbasCollection ok. Thanks for reply!
@chrisg4433
@chrisg4433 6 лет назад
If only we had a cheap large resin printer
@xander4652
@xander4652 6 лет назад
Can you print a mask full size
@thepulle4722
@thepulle4722 6 лет назад
This channel should be renamed to The Mighty CR10's Collection
@Quad_Awesome
@Quad_Awesome 6 лет назад
@Mighty Jabba's Collection The Gear best promo codes have expired.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Thanks for letting me know. I think the ones for everything but the S5 are still good. I will have to get in touch with GearBest to get a new coupon, but since they are out for New Year's it will be a few days.
@Quad_Awesome
@Quad_Awesome 6 лет назад
The S5 is the one I tried to use.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I have added an updated code to the video description. Thanks.
@bgrant1512
@bgrant1512 5 лет назад
I have this printer and I have to say this is a very rose colored review. Ive had nothing but issues with this machine. The overall design didn't scale well. The z axis is a major problem. They hang two stepper motors off one side and nothing off the other, You can get away with this on smaller machine and not see any issues but when you have a gantry that's 20' long you cant. the two sides come out of alignment just enough to throw the bed leveling totally off. On top of that show stopper add that they used a bed heater that is way to small. Ive been struggling with mine for over a month and have yet to get the first layer laid down well. I give this machine a 3 out of 10 and wouldn't buy it again.
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
To be fair, this wasn’t a review at all - just a first look at the printer to see what it could do. I made a separate review video that did explain a lot of the issues with this machine. While my conclusion wasn’t quite as negative as yours, I agreed that it has some problems and I don’t recommend the S5 compared to the smaller printers in the line for that reason.
@MrStringybark
@MrStringybark 6 лет назад
You say a number times that it printed just fine. How about clarifying that wishy-washy statement so that people who are maybe thinking of buying one of the Creality models can make a serious judgement.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
What specifically do you want to know? This particular video is a first look and not a full review (that is coming soon) so maybe I can address it then
@Riztech101
@Riztech101 6 лет назад
8:13 Creepy!
@Kostasoflow
@Kostasoflow 6 лет назад
Can you do the Anet 8 ?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I probably won't be doing the Anet A8 because I don't like kits that require you to assemble everything, and because I haven't heard that many good things about it, but there are a lot of reviews already on RU-vid if you're interested in it.
@Kostasoflow
@Kostasoflow 6 лет назад
Ah ok thanks for the reply keep up the work
@fopm008
@fopm008 6 лет назад
Tons of reviews on the A8. It's super ok. Not bad for the price but the CR-10 family is by far the best for the $
@Kostasoflow
@Kostasoflow 6 лет назад
i already have the A8 had it since may, wanted him to do a review on it :)
@leezhieng
@leezhieng 5 лет назад
Anet A8 has tons of limitations. Quite a mess just to get my first decent print.
@redcastlefan
@redcastlefan 6 лет назад
oh so you live in japan or have something to do with it ?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I lived in Japan for a number of years, but not anymore.
@redcastlefan
@redcastlefan 6 лет назад
goes to show how two letters can reveal alot so try to hide things like that
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Nokia True, although it’s not a secret - I’ve mentioned it a number of times on the channel. Still, good to be aware of what you’re revealing to people on the internet
@javier42400
@javier42400 6 лет назад
where did you get the stl from stranger things?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Thingiverse. The link should be in the video description
@javier42400
@javier42400 6 лет назад
oohh sorry men i dont see all description sorry :S
@khalid200313
@khalid200313 6 лет назад
XNLYL for s5 doesn't work
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Hi. It does work, but they recently raised the prices on most of their 3D printers, so the price I had in the description is no longer valid. I have updated it
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
They have added the code GBTE, which takes 15% off of any 3D printer that's not already on sale, and that makes the CR-10 S5 cost $942.
@4funrc11
@4funrc11 6 лет назад
Oh jeez! :'○ Such a lousy (sob, sob) printer. Repack it and ship (YEAH!) it to me. All your issues with this printer will be solved, and we'll both be happy. Very happy, indeed. Thx in advance! :*)
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
That's a kind offer, but I'll just have to make do with it somehow...
@etzioplay6904
@etzioplay6904 6 лет назад
wait you used flexible filament and your complaining that its flexible??
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
It's not flexible filament.
Далее
Creality CR10S Full review! Is it better than old CR10?
20:33
Creality CR10S Full review! Is it better than old CR10?
Просмотров 709 тыс.
Creality CR-10 S4 Review -- Is Bigger Really Better?
18:09
Creality CR-10 S4 Review -- Is Bigger Really Better?
Просмотров 57 тыс.
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
22:34
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
Просмотров 197 тыс.
Июль в Tanks Blitz
51:46
Июль в Tanks Blitz
Просмотров 91 тыс.
Спасение мирного города #rust #triffon #раст #трифон #superman
00:14
Спасение мирного города #rust #triffon #раст #трифон #superman
Просмотров 93 тыс.
Секретик #9 | Варнава, Катя IOWA, Аня Покров, Алексей Жидковский, Аня Плетнёва, Маша Кравченко
53:21
Секретик #9 | Варнава, Катя IOWA, Аня Покров, Алексей Жидковский, Аня Плетнёва, Маша Кравченко
Просмотров 199 тыс.
Creality Cr-10 S5 3D Printer Review!
14:37
Creality Cr-10 S5 3D Printer Review!
Просмотров 13 тыс.
Creality CR-10 - Is It The Best 3D Printer? My Review
12:10
Creality CR-10 - Is It The Best 3D Printer? My Review
Просмотров 980 тыс.
Carbon Fiber 3D Printer Filaments: What Are They Good For?
26:17
Carbon Fiber 3D Printer Filaments: What Are They Good For?
Просмотров 732 тыс.
The 3D Filament Tier List! Which Should YOU Use?
44:34
The 3D Filament Tier List! Which Should YOU Use?
Просмотров 590 тыс.
CR-10 with Direct Extruder - Install an E3D Titan Aero for more productivity
11:07
CR-10 with Direct Extruder - Install an E3D Titan Aero for more productivity
Просмотров 300 тыс.
Creality CR-10 S4 | Let's Build, Upgrade, Discuss | IT'S HUGE!
11:29
Creality CR-10 S4 | Let's Build, Upgrade, Discuss | IT'S HUGE!
Просмотров 11 тыс.
I 3D Printed a $1,224 Chair
23:56
I 3D Printed a $1,224 Chair
Просмотров 119 тыс.
Make Insanely Huge Prints on the Creality CR-10 S5!
18:28
Make Insanely Huge Prints on the Creality CR-10 S5!
Просмотров 395 тыс.
Turning 3D Print Waste into New Filament!
12:48
Turning 3D Print Waste into New Filament!
Просмотров 1,3 млн
✔ CREALITY CR-10 S5 Unbox & Review! | HUGE BUILD SIZE!
13:35
✔ CREALITY CR-10 S5 Unbox & Review! | HUGE BUILD SIZE!
Просмотров 32 тыс.
Не поймаю говоришь? ;)
0:55
Не поймаю говоришь? ;)
Просмотров 2,1 млн
Бабка пустилась во все тяжкие Название: Полетта #фильм #сериал #моменты
0:41
Бабка пустилась во все тяжкие Название: Полетта #фильм #сериал #моменты
Просмотров 745 тыс.
Мальчик-азиат хочет кушать тоже самое что и белые….😳 #кино #фильм
0:59
Мальчик-азиат хочет кушать тоже самое что и белые….😳 #кино #фильм
Просмотров 3,3 млн
Он поймал нечто на озере и случилось страшное!😨
0:29
Он поймал нечто на озере и случилось страшное!😨
Просмотров 1,4 млн
Дай знать, если жизненно 🤣💕
0:20
Дай знать, если жизненно 🤣💕
Просмотров 1,2 млн
Коллекторы пришли к бывшему мужу должницы #кинонавечер
1:00
Коллекторы пришли к бывшему мужу должницы #кинонавечер
Просмотров 2,7 млн
Валя Карнавал влюбилась в Павла Дурова \ интервью Надежды Стрелец #shorts
0:18
Валя Карнавал влюбилась в Павла Дурова \ интервью Надежды Стрелец #shorts
Просмотров 3 млн