Airsoft Review of The Elite Force Glock 19 by VFC - $170 Airsoft Pistol 

now i want a glock that says mcdonalds...

Glockdonalds?!

Your description of Glock's personality is why its been such a hit with departmental and duty use all over the world. It just does its job.

the airsoft glock mags are more expensive than real glock mags for a .45

"this pistol chronos at who cares, and the range is whatever with .you'regoingtousewhatever gram bbs anyway. finally somebody says it. for pistols none of it matters.

You want to see a G18c.... Don't we all...

The oil on the slide made me uncomfortable

I love this review. hilarious that the beginning review could fit an actual Glock 19. The Honda Civic of the gun world.

i dont even do airsoft but i really wanna get one of these lmao

Just to make it more well-known by adding another comment: these Glocks are apparently able to accept WE G-series magazines, which are significantly cheaper. I wish these were available in Canada, but nobody’s importing them with extended inner barrels yet. One day, I’ll probably get one if they make it here.

I like how you go over how the licensing means jack. I just messaged PTS a few days ago asking if any of their new mags would fit my WE-Tech ACR and they told me, “We don’t test our mags in the counterfeit ACR”.😂 Only reason I bought the WE-Tech version is because it’s 1:1 scale with the real Remington ACR whereas the A&K and PTS models are not and have the charging handle in the wrong position. One of my friends had one too and said it shoots pretty well. I found midcaps that will work without me taking a dremel to the internals though so it’s all good.

Praise worthy, for $70!The only issue was the round gasket ring seal between the CO2 and needle ru-vid.comUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . Withered away, and I'm having a tough time finding a replacement.Gun still works perfectly, but needs a new gasket. Can someone please say where to find the gasket replacement?

After comparing mine to my real G19 gen 3 I found that you can use alot of real glock parts like the slide release, mag release, the mag base plate and even the plate on the rear of the slide. I replaced the stock ones with aftermarket silver extended releases and silver reaper logos on the base plate and slide base plate.

Here’s my take These Glocks are cool, don’t get me wrong. It’s bout time we got a legal Glock in Airsoft. I just wish it wasn’t VFC. If it were another WE or a KJW and their awesome gas gun past. I myself have a KJW KP-17, and it’s awesoooome. It’s a Glock but no trades, if it had the trades it would cost another $50. Kinda ridiculous. The replacement mags... $45... you’ve gotta be takin the piss. A WE and KJW replacement mag is less than $30. Way better price. If you’re looking at getting this gun as your first one and ur a beginner I wouldn’t recommend it. Get an elite Force 1911, or an ASG P0-9. Wait a few months for them to work out the kinks of these first batches. That’s my take.

Those first 18 seconds is literally everything Airsoft I own except I'm the Grandmaster myself lol. Great video although the issue you ran into with the slide hanging up when slowly racking it back and forth is actually very common in most, if not all Airsoft GLOCK replicas.

Those magazines cost more than actual G19 magazines!

I bought the non-blowback edition. Dead accurate and amazing. Totally worth $70

I loosened the screw just a tad right under the back site and the slide now closes perfectly every time. Love my G18c and looking to buy other glocks. As I have sever real ones in the IRL airsoft crazy world. My G18c extended Mag allowed me to shoot 3.5 to 4 full mags on one fill up as well so kudos to that thing. Thanks for you Videos as you have helped me out with seeing certain guns i have looked at and made choices based of what i saw like and or hated from your Reveiws. Thanks a bunch and keep it up!

I like the fact that the plate hides the valve so when I drop the mags I don't have half the field on the valve

I have the E.F. G17 Gen 4 with 3 extra Glock mags. I love it, feels and shoots awsome. Feels more real than my We G18c, also it has stronger polymer and metals for the build then the WE. Will be happy to see the G18c from Elite Force when it comes out.

My first video of yours and I really liked it. Enjoyed your style and way of talking. You got a new sub 🤙🏼

that opening was priceless like the glocks people have made without the licensing

Greetings from Ireland Scott, love your videos and youve intrigued me on almost every review, youre a grey youtuber keep it up.

Ah, I see you're a fan of Prime Thanatos as well.

Dude thanks your the only one who talks about more of the gun am buy this glock and a Nother clip thanks man

GLOCK™> not ™

Perfect for training - fits all my ccw holsters

I love this dry sense of humor

Great Review, Keep Up the good work! Can't wait to see you again at tx paintball

Love the slide manipulations with the finger in front of the slide

I have been waiting this review

Very good review straight and to the point.

Good reveiw :)

1:02 i thought that was my fire detector LOL

I'm glad I purchased the previous Stark Arms G19 Gen3 for much le$$, also made by Umarex with Semi/Full Auto selector under the slide and 100% exact same trade marks as the real one. Now they sell same pistol under Elite Force G19 and added the" Officially Licensed" logo to the handle replacing the Made in Austria Glock Inc. Smyrna, GA and leaving the US. Pat numbers blank. They also removed the Semi/Full Auto selector and on top of that, they raised the price. Hard to find other brands on eBay (WE- KJW, etc) because they will be removed.

I bought a glock 42 from the same company for the same price, It was so good and it never broke down or stopped working, So today I decided to buy a glock 19 gen 3 (One being reviewed in video) and I am so stoked to get it in the mail!

I have the same model but the co2 version, I love it. Haven't had experience with other airsoft equipment yet, because I don't don't have much money for the hobby (besides the garbage cheepo stuff that depending on what you get can be mediocre to shit) but, I have run quite a few rounds through it, and it works like it should, feels nice, shoots straight, (and differing from most opinions) looks amazing. If you wanted something good to start the hobby off with (like I am), I personally, would recommend it. Ps it costs about $70, buuuuutttt, it's pretty fun to use.

My dad has a Glock 23 and I gotta say, that replica looks exactly the same, Great review!

Great vid! Keep it up

Great video!

thats how they make their money back like printer companies, cheap printer expensive cartridges, cheap pistol, expensive mags

This would be a nice piece to mod and use for CQB, if you had some good changes on the inside, then some sights and a drum mag. Turn it into some sort of Artillery Luger but it's a Glock.

I own a 19 and I love it! It kicks really hard and I think that is awesome! I don’t like how expensive the mags are!!! I hope they produce custom parts for it soon!!!!!!!

The gap between the slide and frame looks far more consistent than any of the real glocks i own 👍🏻

I have the 17 gen 4 and out of my 6 pistols it is by far my best one. Yes the mags are pricy but then again youre paying for quality. Also any kwa magazine is gonna be around the same price.

This seems exactly like the Glocks released by VFC years ago. If so, there are OE and Aftermarket parts available at WGC shop.

“A Glock fits well in the hand or at least my baby hands” Me:what?🤣

"Chronos at who cares and the range is whatever!!!" HAHAHHAHHAHA

I watched this a few hours after purchasing the product and so far I can say it has performed great for me! I just Wish the I could get the spring in the mag to stay down without holding it while loading the gun.

just got my glock 19 6mm airsoft gun, and i gotta say, this item was totally worth the money!

Wow, so VFC even used the same "GEM208" serial number on the barrel and slide that did years ago.

Well now they’ve done some major quality control and now they are waaaaay better

nice review on the 19!

man i cant wait until the next vid

I saw 44.95 and thought if the price of bananas in unturned

I understand that this comment will likely come after many of you have bought this, but as someone who got this product from outside of airsoft, I feel like my issues with reliability are something important to mention. For reference, I use airsoft guns for dryfire and dryfire about 100? 150? times a day (i'm not quite sure so take this number with a grain of salt). I have had this product for about 4 months and have had the hammer assembly break twice, both from what appear to be fundamental design flaws with this glock although they appear to be in other glock systems. The first time, about 2 months in, the tab that the hammer spring pushes the hammer with breaks. The hammer is made out of aluminum and this part sheared off causing the hammer to no longer work. I ordered a replacement hammer from a different company which while made out of steel, did not fit and had to be modified to fit. Now fast forward to a few weeks ago. I first noticed that similar to what was described in the video, the slide would get jammed up and stuck half way between fully open and fully closed. I thought nothing of this as the problem eventually went away with a few days of dryfire and i thought nothing of it. A few days ago i noticed that the trigger got significantly lighter than it was normally. I didnt really care about it and continued to dryfire until it started to get annoying. Apon disassembly, i noticed 3 problems. First, the hammer spring was bent out of shape. When attempting to bend it back, the spring snapped. Second, the spring that resets the hammer bearing(idk what its called but it allows the hammer to get cocked smoothly) snapped in half, likely what caused the slide getting jammed open. This could be partly my own fault as i had to bend that spring to get it to fit with the aftermarket hammer but it didn't break where i bent it which confused me. Third, the hammer housing had a physical indentation where the hammer hit it. This was a result of the hole which is used for a pin found in the glock 18 not being filled. This not only caused a dent(which would not be a problem on its own), but caused cracks to form in the hammer assembly. Another problem that has consistently happened is the breaking of the baseplates. These magazines are quite heavy and when impacting wood flooring, the baseplates tend to shatter. Now this was solved by adding foam pads to the bottom of the plastic baseplates, but it is still a problem. Overall, these problems appear like they would be consistent throughout all airsoft glocks, but something to take note of if you wish to use yours for extended periods of time. Thanks for reading my essay, for completing this task, you get 1 extra brownie point.

I know it’s airsoft but please always practice as if it’s a firearm so that you don’t develop bad habits. Good review.

I got her late but this is a good review because Glocks are my favorite pistol.

This is a great handgun! I got mine about two months ago. Great all around.

After only 3 weeks of use the frame cracked next to the slide catch. Also the slide was damaged using too much the slide release and it caused the slide not locking back. Great for training tho. If it had a bit more stronger frame and maybe steel slide it would be perfect. Im bow looking forward to ghk glock 17 model that was promised to be released later this year of 2020.

When I first shot my airsoft Glock 17 gen 4 the orange tip shot off. Literally the first shot! But I do not mind.

Just to let everyone know, if you’re using a real Glock hard case holster it either might not fit or barley fit. The airsoft glocks are a little thicker then the real ones.

“The slide release will lock the frame to the rear” Lol

I have one and I love it I can take it apart and put it back together in less than one minute

What's sad is that the G18 was a failure. I've replaced the magazine release on mine after fielding it for just this year, the full auto works when it wants to, the slide wears at the slide catch. I actually had to grind out the wear and shim the slide catch to take all of the wobble out of it in order to prevent further wear. This was done on the replacement. Same issues as the one I sent back. Welp, I won't hold my breath on umarex fixing these issues on the G18.

I love your videos

I just bought myself a Glock 17 Gen 4 for my birthday two days ago as my first ever GBB pistol. The store had many selections of pistols, including Hi Capa legends like the Tokyo Marui 5.1 and the JW Taran Tactical Combat master. But for some reason the good ol' Glock felt the nicest in my hand and really had that blend of ergonomics that I was looking for in a pistol. It's nothing groundbreaking or fancy, but it is a serviceable and reliable sidearm that won't let you down for the sheer consistency of it all. I cannot wait to go to an event and bring this to a field so that I can truly let it rip. The mags are too expensive tho so that is a bit of a downside.

Finally another review

shout out to gi tactical for never having anything in stock lol

I went to my local HobbyTown USA and I saw a glock 17 just like this one you review but it cost $130 to $140

You're like the Regular Car Reviews of airsoft.

Now we need a p320 version. I only want these so I can practice drawing and shooting from concealment

I want to be part of the notification squad!

yeah i'd say the slide hang up was a tolerance thing. Just a hair on the larger side of the tolerance for the barrel and/or smaller side of tolerance for the slide

hope they make it on g-26

I’ve got the non blowback version of this and it’s a decent sidearm, don’t expect any long range accurate shots though

The beeping at around the one minute mark scared the crap out of me.

I have that glock 17 and it is very nice as a side arm when I am not running my M92

Thanks you inspired me to buy it

i got this on sale for 108 US dollars, plus shipping. 118 total

I’m a paintball dude but I want to try to start playing both

19 round mag, 40 shots per gas fill, $45 magazines, just a simple glock. You can get a marui hi-capa with a 31 round mag, 90 shots per gas fill and WAY cheaper mags for about $150.

Would you suggest the green gas over the co2 version? Also witch version will run longer per full or cartridge. Thanks

If you built a pistol that is aeg mag fed,then your a legend

Bro I just wanna hold that magazine for once look at the detail and it looks so good

What upgrades can I add to make this reliable and tough enough to run co2 mags?

@usairsoft how do you feel about the VFC P320? I had one and I loved it , it’s just smooth ( for me at least ) and it’s easy to upgrade. I switched to the glock 19x and it’s giving me problems ( I fixed them but still ) I’m definitely going back to the m18 p320 black

You can actually find a threaded barrel for these on Helix Airsoft's website. Keyword: Glock

All I’m using this for is a side arm for my sniper , at my field snipers have to shoot 75ft+ if under 75 you have to use sidearm

I’d be cool if they made a limited edition that was made from the same materials as the actual firearm (they’d probably never do it tho)🙁

I got this gun and the magazine it comes with won’t fill up with gas the mag is not leaking it’s just when I try to put gas in it only fills up for second and then it won’t fill anymore please help

To be honest , If you are in asia , don't even bother with this piece Personally, I lived in HK and run akimbo glocks in CQB. The first pair of glocks I used was a second hand TM Glock22 and a VFC Glock 17 gen 3 ( I assumed that it is the same gun because they said that they use old mold). Both survive the first game . However VFC one already lose its sight . I had to buy a new sight and glue it to the gun. Disaster happened in second game though. In the middle of fighting, VFC one's hammer set is broken and TM one's slide broken but still fire accurately For the VFC one , I can hardly find any spare parts for the hammer compartment . Most of them were out of stock at that time (hammer set has a bit variation from TM). But for TM slide, I found many different type of replacement .(in asia) For example ,there are normal aluminum slide for G17, or custom slide like SAI ,TTI ,Agency Arms , ZEV.Some can even install RMR sight. Finally , I got myself a sliver TTI G17 Slide to save the TM pistol. At that time , John Wick 2 is a big hit. My fellow airsofter in hk build their own TTI G34 which similar to the one in movie. As I saved up more for the hobby , I transformed that TM pistol a lot. There are lots of aftermarket parts to work with in asia. The only thing left are the guiding rod, the middle body and the hammer set . My second pair of glocks consist of a custom TM glock and a WE G18C. ( good thing about we in hk is that they had a lot of backup parts. To be short, in asia , glock are saturated in airsoft . You don't have to try a mediocre one. Go get like KJ KP13 ,KP17 , WE G17 ,G18C or even build your own If you are in place other than asia and you want your glock other than VFC/EF , I guess I could only wish good luck btw.

Can't wait for when it's back in stock

I also love synthwave type music awesome video btw :D

As far as the standard gbb models go... Idk if they're worth the $170 tag plus the expensive mags. But the CO2 high end versions are what I'll be waiting for. I want that 34 that they have lol

Hopefully they make the slide like tenifer finish to make it more real

I really only want this for safe draw and front sight drills inside my home. Trigger break is most likely not the same but it still counts as dry fire

i talked to a sales/tech guy at a local airsoft store and he told me that he'd choose a WE over the Elite force because the WE is based on TM parts. How do you think the EF compares to the WE glock?

Where is the store u mentioned in the beginning I live in frisco and where do you play

From what I’ve researched the glock 18 is really good and is about 230$ but with the package with gas and 500bebes it’s 280$ and it’s semi and automatic it’s the best glock in my opinion and the fun one