ARB Skid Plates Installation and Review - Lexus GX460 - Overlanding Under Body Armor

Подписаться 3,4 тыс.

Просмотров 7 тыс.

50% 1

ARB 5421100 Skid Plate Skid Plates for Lexus GX amzn.to/3M4bduL
We install the ARB Skid Plates on the Lexus GX460 with a CBI front bumper for added under armor protection against rocks, stumps and boulders during overlanding and light rock crawling adventures. By keeping the underside of your vehicle out of harm's way, ARB skid plates allow you to fully enjoy the terrain of your adventure without having to worry about what lies beneath.
ARB Skid plates are manufactured using heavy duty materials providing protection against rocks and boulders while overlanding or off-roading. The skid plates are also lightweight which helps you get over obstacles better than ever before.
ARB's skid plate models for the Toyota, Lexus and many other makes and models are made from ultra high tensile steel and are precision laser cut for a custom fit. Designed to withstand intense wear, each skid plate is backed by a comprehensive product warranty.
Chapters:
0:01 ARB Skid Plates installation on Lexus GX460
1:46 Overview of ARB Skid Plates installation on a Lexus GX460
2:55 Detailed Installation of ARB Skid Plates on Lexus GX460
8:54 ARB Skid Plates Review for Lexus GX460
MetalTech Rock Sliders for Lexus GX460: • Lexus GX MetalTech Roc...
Visit us on:
www.TXGXOverland.com
Our full Lexus GX460 build sheet: txgxoverland.com/lexus-gx-over...
Facebook: / txgx-460-ove. .
Instagram: / txgx_overland
Try our RU-vid Lexus GX Playlists:
Lexus GX Overland Build Video: www.youtube.com/watch?v=dXU-w...
Overland Trip Videos: www.youtube.com/watch?v=PcOJP...
Overland Vehicle Comparisons: www.youtube.com/watch?v=zvmNd...
Texas Off Road Parks and Overland Trails: • Texas Off Road Parks &...
#sponsored #affiliatelinks #gxor #lexusgx #toyota #clublexus #4x4 #gx460 #gxor #lexusgx #gx460 #gx470 #lexusgx460 #lexusgx470 #prado #gx460offroad #gx470offroad #metaltech4x4 #prinsudesign #cbioffroadfab #dobinsonssprings #falkentire #wildpeak #cali_raised_led #smittybilt #factor55 #gx470 #lexusgx460 #lexusgx470 #prado #bashplate

Авто/Мото

Опубликовано:

9 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@Aaron-xr4vv 2 года назад

thank you!!! you probably saved me about 4 hours

@TXGX460OverlandandOffRoad 2 года назад

Lol… happy to help!!!

@johnnyboi22 Год назад

Just installed these today on my 2012. Your video helped a lot especially with that big bold on the rear support bar. What a pain in the ass! I have two bolts left over after installing though, hope I didn't miss something but I don't think I did lol

@TXGX460OverlandandOffRoad Год назад

Glad it helped!!!

@billnasello455 2 года назад

Just in case anyone is interested - Victory 4x4 skid plate bolts right up to the CBI covert bumper. And it has oil filter access.

@TXGX460OverlandandOffRoad 2 года назад

Thanks for the confirm!!!

@KRev-nb7gc Год назад

That bumper is niiice.

@TXGX460OverlandandOffRoad Год назад

CBI… love it

@LexusGX460-OFF-ROAD 2 года назад

we chose the RCI skids for protection... we live off road so we needed a tad more thickness... in all honesty only the front differential skid needs to be tough since it hangs the lowest... like you said, you'll definitely have a weight advantage with this set up. Keep us posted on how it goes! ✌️

@TXGX460OverlandandOffRoad 2 года назад

Thanks for commenting. I think the RCI’s are the highest quality available so you chose well! Wish I lived somewhere where I needed skid plates to get home everyday! 😂😂 V-cool!

@FPdesignfab 19 дней назад

They look good for the price point and light duty use case, bummer no oil change access plate and that they left the exhaust unprotected by the transfer case.

@ruizpaul642 2 года назад

After installing mine I had a bad stiff neck. Ran into the same issues you mentioned

@TXGX460OverlandandOffRoad 2 года назад

I can believe it!

@jeffrash6900 2 года назад

Just watched your video and interestingly I just completed the ARB Skid plate install on my 16 GX460 last week. I also have the CBI Covert bumper and was also confused on how to mount the front skid at first. I then realized that you need to reuse the two support pieces from the OEM Skid and it bolts right on perfectly. The only issue I had was the driver rear bolt on the front skid needed to be widened with a Dremel to make it fit (DYI Garage had the same issue). Let me know and I can send you a picture of what it looks like with the OEM supports.

@TXGX460OverlandandOffRoad 2 года назад

I would love to see a pic of that! Maybe you could DM me on FB or IG? Thanks for commenting - glad to know I’m not crazy having a hard time with it!!! How was ur install other than the very front?

@jeffrash6900 2 года назад

Posted the picture to your FB page. Other than the one hole that needed to be widened everything went pretty smoothly. Just took my time and tried to be patient. The long handled tool that holds the nut for the bracket bolt I went in from the hole to the drivers side of the bolt hole using needle nose vise grip and then was able to remove the tool afterwards.

@LexusGX460-OFF-ROAD 2 года назад

how are you liking the skids so far???

@blurglide 10 месяцев назад

Hmmm...the transfer case is where you're most likely to get high-centered, and that plate looks less than robust. I might get a better plate there, but the ARB stuff looks fine for everywhere else

@TXGX460OverlandandOffRoad 10 месяцев назад

I’ve drilled the center diff plate pretty good and it’s held up so far. It’s a smaller piece so less leverage to bend it out of shape.

@ikecalle 9 месяцев назад

Surprised the front plate assembly does not cover the exhaust pipe that is next to it. Isn't the aluminum pipe vulnerable to puncture also? I'm confused

@TXGX460OverlandandOffRoad 8 месяцев назад

Doesn’t touch it - must not go up far enough

@Sven95lwb 2 года назад

Interested in the same arb setup..Does the center piece use the existing captive nuts? The reason I ask is that one of my stock nuts broke off.

@TXGX460OverlandandOffRoad 2 года назад

The front part of the center piece attaches to the front piece with provided hardware (clip in nut, bolts). The rear attaches to existing bolts (2 spots). Does that answer your question? If not let me know.

@pennmikael 2 года назад

Any concern on the Transfer Case Skid? Seem like most of the force is still transmitted to the thing you are trying to protect, albeit it's now distributed.

@TXGX460OverlandandOffRoad 2 года назад

I agree it will still get a lot of energy if impacted, but hopefully it will be a glancing blow that it can slide off of.

@pennmikael 2 года назад

@@TXGX460OverlandandOffRoad thanks. Are you still able to access the drive shaft zerks for greasing?

@TXGX460OverlandandOffRoad 2 года назад

@@pennmikael couldn’t tell ya - sorry. I don’t do that kind of service on my GX.

@swangfuI Год назад

Have you taken these out on the trail yet? Curious how theyve been holding up!

@TXGX460OverlandandOffRoad Год назад

Used them the first time at Wolf Creek and they took some really big hits. So far they are holding up really well. They have since been on several other trails, taking big hits like a champ. The only thing I wish was different about them: wish they had an access panel for the oil filter. That said, I haven't had any oil change places give me trouble about having to remove the forward most panel to access the oil filter.

@doeleen Год назад

Thanks for the videos. I was about to ask about oil changes. Is it just one plate that needs to be removed?

@Reinfusion Год назад

Based on this it looks like the 5421100 fits the GX460 - I'm seeing though that the 5421110 is the part number for KDSS vehicles and it's in another video for the GX460...but seems like both fit?

@TXGX460OverlandandOffRoad Год назад

Good question! The ARB 5421110 looks like its designed for the Prado 150 with KDSS which you would think would work for the GX460. It looks different though - more indented in the front - don’t think that would get in the way but I can’t confirm. Let me know if you figure out what the difference is.

@Reinfusion Год назад

@@TXGX460OverlandandOffRoad installed the 5421110 and it fits just fine with exception of having to bore one hole out a bit more so it would fit on the front plate. In your description you link the 5421100 but watching your video again you actually did install the 5421110. Cheers!

@blurglide 10 месяцев назад

Does this have to be removed to change the oil filter?

@TXGX460OverlandandOffRoad 10 месяцев назад

The front panel does. I get my oil changed at the fast chain type place and they’ve never complained. Only had one put a surcharge on the bill.

@luen6630 2 года назад

did you have to take the skid plate to change the engine oil ?

@TXGX460OverlandandOffRoad 2 года назад

Yes - planning to cut an access hole

@FStewBailey 2 года назад

Do you need to remove the whole thing to in order to change your oil?

@LexusGX460-OFF-ROAD 2 года назад

usually there's an access hole I think...

@TXGX460OverlandandOffRoad 2 года назад

You can easily reach the drain plug. To replace the filter you have to remove the front skid. This is the same as stock since it comes with a (thin) skid plate.