Arctic Cat Adapt clutch DIY install on 16'-22' Cat sleds. 

Thank you so much for the fast reply really looking forward to doing this great channel!

Great video. This new primary clutch from Arctic Cat is supposed to be amazing. Can’t wait to ride my brand new TCAT.

Very good specific info for cat guys love the channel!

Top notch tutorial

Secondary bolts needs to be torqued with out a belt otherwise it can come loose Seen it happen before

Very good info. This is on my list for the Riot this fall.

Nice work I like this mod plus less rotating weight

Nice I take it the long side goes in towards the center of the clutch.

excellent teacher

Great information.

I am gonna do same setup on my 16 for next yr

Very helpful, thank you. I have a very old cat but thinking of upgrading. One thing I don't understand: can you describe how the auto tension feature works? to me it looks like the secondary bolt you removed would normally act like stop for how tight it can close, and when you remove it the spring just applies constant pressure to the belt and the sheves force the belt up higher on the secondary, makign it tighter. This is only possible due to the idler on the primary; so the belt won't overheat. I haven't found a description of how it works. Does that make sense?

Do you know if the Adapt Clutch can be shimmed for optimum belt the sheave clearance? Ironically, both of mine are closer to .050 than the desired .020

Excellent channel. Can these be installed on pre 16 sleds? I have a 14 1100 turbo with the older clutch. Keep up the great content!

I am just doing the adapt upgrade now to a 2016 zr8000 snow pro. Here is what I have a question on. It looks like the 2016 clutch bolt (2623-180, 152mm long) is different than the 2022 bolt (1623-792, 157mm long) which is actually the bolt used on the arctic cat clutches (2014). The 2023 bolt (2623-308, 132mm long). I believe the small spacer/washer is 5mm. So if I figured this right Arctic cat wants a 127mm for length from the end of spacer to go into the crank. With the set of the team bolt and spacer from 2022 you are at 122mm so basically 5mm short which since you have been doing this apparently is fine. If want to get to 127mm deep with spacer you would need to take 5mm off of length. Stock spacer is 30mm long. If you want to make your own spacer they are 20mm OD x 30mm long (25mm if want same depth) with clearance hole for 12mm bolt. Thanks.

Are you not installing the damper ring on the new adpative clutch? I thought it was recommended even on the new adaptive clutch. Thank you for all your great videos!

Can you explain the additional things that would need to be done on a 2012 f800. Looking at getting the adapt for my sled. Currently have the big fin secondary.

What is needed to install this clutch on a 2013 xf800 procross? In detail? Really interested in getting one after watching your awesome video looks like it’s going to be a great clutch!

Very though rule for the beginner riders

Can you put a adapt clutch on a 15 zr6000rr

What are you using to hold the spare belt on the belt gaurd on the 18 mc @ 12:09

Will this setup working on my 2018 thundercat ZR9000 998turbo?

Question, so remove the adjust bolt? It will self adjust??

Will the adapt clutch work on a 16 ZR 7000?

Can i use the adapt front clutch on my 16zr9000 ?

On the 16&17 what belt do you use

No need for balance gear? If yes where it can be found?

Cat sucks all the way ,no customer service, buy a 20,000 sled , no one can fix , and they Don give a shit