ASUS ROG Strix GL502 Keyboard removal, disassembly guide

Подписаться 25 тыс.

Просмотров 35 тыс.

50% 1

In this video i will show you step by step on how to tear-down and Reassemble your ASUS ROG Strix GL502 Keyboard removal, disassembly guide
if you have any request or questions leave them in the comment.
------------------------------------------------------------------------
👉 Do it yourself service:
✖ TOOLS USED:
● Keyboard : amzn.to/2ZfjCEL
●The proper Teardown kit!: amzn.to/2CATV8e
●Shop Towels Origina: amzn.to/2TFXF0O
●Tweezer Set: amzn.to/2yvNjVV
●Electric Screwdriver: amzn.to/2D0iGvq
●Thermal Paste: amzn.to/2O3g3u4
●Canned Air: amzn.to/2yzuNf9
●Air Blower: amzn.to/2O4f78F
●Alcohol isopropilico: amzn.to/2qGMIws
✖ Equipment Used:
●Hakko Hot Air Station: amzn.to/2O1k0PX
●Nozzle for hot air station: amzn.to/2D21XYM
●Hakko Soldering Station: amzn.to/2PRrtCF
●Hakko Air Filter: amzn.to/2O2zJyf
●Microscope: amzn.to/2CDqyCb
●Kester Solder: amzn.to/2D2Bl9R
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
#laptopDIY #Laptopservice #laptopteardown #laptopupgrade #laptopreview

Наука

Опубликовано:

21 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@kr0n580 3 года назад

Extremely helpful video, thank you very much!!!

@uFixTek 3 года назад

You're welcome! Thank you for the feedback and your support to the channel by a SUB:P if you have any question or request in the future feel free to ask me in any of my videos.

@kavehmj 2 года назад

Thank you for this helpful video. Can you please introduce soldering which is suitable for this?

@uFixTek 2 года назад

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: use any soldering iron and a plastic, from old keyboard, amzn.to/2ZHQFWd

@b.s.b955 3 месяца назад

Thank you very much❤️

@uFixTek 3 месяца назад

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

@kevinku6113 4 года назад

could you please do a video about rog gu502 keyboard removal, something stuck in my keyboard :(

@uFixTek 4 года назад

ok , i will try to get my hands on one and i will make a video , thank you for the commets

@JPLafreniere1 3 года назад

Hey there, would you be able to make a video on how to replace the keyboard for the ASUS ROG Strix GL703VD? My down arrow broke off of the bracket. I may be able to just replace the single key, however I might end up replacing the entire keyboard at some point since the cheapest option is purchasing an entire new backlit keyboard (rather than purchasing one single key for $10 I can have an entire replacement set for around $50). It would help me out so much! Thanks for your videos, these have been very helpful.

@uFixTek 3 года назад

Thank you for the feedback and your support to the channel by SUB :P regarding your question: i will defiantly make a note to make a video for that, BUT the steps and how to change it its the same as this one. i will try to get my hands on one to make a video.

@gustavoazurduy7226 3 года назад

Nice man, thanks a lot.

@uFixTek 3 года назад

You bet! thank you for the support to the channel by a sub my friend :)

@gustavoazurduy7226 3 года назад

@@uFixTek Done!

@uFixTek 3 года назад

Thank you, if you ever got any question or request feel free to ask me in any of my video comments :)

@thangdinh1078 4 года назад

I have problem with the rgb keyboard can you show me where it is in the mainboard?

@uFixTek 4 года назад

6:50 the connector is right beside the two white flex cable beside the toucpad

@konstantinhristow2964 3 года назад

Hey,after plug new keyboard what plastic if you use ? Tnx

@uFixTek 3 года назад

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: use the plastic from your old keyboard keys.

@AB-kv8ky 5 месяцев назад

Hi. Very well done! I have an off-topic question but I think you could help me. I have a customers Asus ROG strix 2020 that Im supposed to remove the bios password lock. Their kid set it and doesnt remember. They updated the bios in the past so the alt-r recovery doesnt work. It turns on and wants password. No boot options, no uefi, no bios setting screen, just password. Any ideas? I'm considering replacing the smd bios chip. Would that even work? I hate just throwing money at a problem. Thanks.

@uFixTek 5 месяцев назад

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, where are you located my friend? so i can assist you with correct links and steps. cheers🍻 NOTE when you press Alt+R and it askes for rescue password, there is date right on top of it, give me the exact date that appears there. even if you can't get to the ALT+R if you see the date at the time of entering password or after entering few times it may give a code and date, give me those info.

@DeeJayResist 4 года назад

What is the tool you use to scrape the plastic off and what plastic did you use to soldier back on to the keyboard?

@uFixTek 4 года назад

its called "solder ball scraper" i only found it in my reballing kit. amzn.to/3fDRrWg or on ebay : shorturl.at/lnAE7 regarding plastic , the best and easy choice is rip off the space bar from your none working keyboard and use that to melt back to patch up. its the same type of plastic.

@sebastianmartinez9998 3 года назад

Thank you so much. Could you make a video showing how to replace the touchpad please? Thank you

@uFixTek 3 года назад

let me call few people and see if i can get my hands on one and i will gladly make one, thank you for your support

@sebastianmartinez9998 3 года назад

@@uFixTek Thank you so much. Although I managed to remove the mousead myself, it wasn't hard, but I had to remove the motherboard. Thank you again for making those videos, thanks to you I was able to replace my keyboard

@uFixTek 3 года назад

@@sebastianmartinez9998 im glad that you could do it by your self, if you ever need help regarding repairs or info let me know in any of my video comments. best of all and thank you.

@Dbdconnect 3 года назад

@@sebastianmartinez9998 I'm thinking of doing the same thing because the surface is worn out. Are there any problems or issues you need to be careful about when doing this? Thanks.

@sebastianmartinez9998 3 года назад

@@Dbdconnect The touch pad is covered by three screws, the middle screw is covered by a small piece of tape. I used tweezers to remove the connectors but you have to remove the motherboard in order to remove the touch pad.

@samuel_david_85 4 года назад

Great video. I have the same model and the battery has swollen up. Can I find the same battery online? Would appreciate any advice. Thanks!

@uFixTek 4 года назад

thank you for the feedback, and yes you can just purchase it and replace it, here is a link amazon USA: amzn.to/3kj4Kzc Amazon Mexico: amzn.to/2PsRJoj

@samuel_david_85 4 года назад

@@uFixTek Thanks so much for your reply. :)

@uFixTek 4 года назад

your welcome :P

@diegoespinoza4403 3 года назад

Hi, I'm looking for the same keyboard (big enter) for a replacement, where can I find it?

@uFixTek 3 года назад

the link is in video description my friend. Keyboard : amzn.to/2ZfjCEL thank you for your support to the channel.

@diegoespinoza4403 3 года назад

@@uFixTek it says currently unavailable buddy :(

@hkshks5863 Год назад

I have same laptop the copper sheet behind the motherboard was removed. Should i use a copper sheet or aluminium. Thermal pads on the vram at the back side?

@uFixTek Год назад

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, i recommend you get a 0.5mm thermal pad and place it on the back of the motherboard where vrams are. amzn.to/3UOeOmn your laptop is refurbished or repaired before, if you don't have the copper sheet.

@hkshks5863 Год назад

@@uFixTek thank you. The repair shop removed it.

@uFixTek Год назад

It's my pleasure my friend, ah oki

@joeyosei9607 Год назад

Hello I have a similar laptop but the only key working right now is the power button. Should I buy a new keyboard or it a motherboard issue.

@uFixTek Год назад

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, if your keyboard NONE of the keys respond at all except the power then it is not the keyboard, you will need to disconnect the keyboard flex from motherboard clean and reinsert it.

@joeyosei9607 Год назад

@@uFixTek yeah I just did that today and it didn't work. Could it be the keyboard connector base which is not working

@alexuribe5572 3 года назад

Hello Guy, Can I find the same keyboard online? i need help please

@uFixTek 3 года назад

is.gd/acjeHU

@lavenatowles3996 2 года назад

I have a Asus ROG Strix Scar GL703GE and I have been unable to find any video for it that will show me how to replace my laptop in it. As a fact it was stated in one video that showed how to tear it down that the keyboard could not be replaced because it was " pressed in" but from the video it looks similarly done as this was was. So could I use the same process?

@uFixTek 2 года назад

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: you model its 99% as this model in this video its the same procedure, if you have any question during or need help feel free to ask me.

@lavenatowles3996 2 года назад

@@uFixTek the black paper protection came off in shreds. Is there a way i can replace it? Also. I read or watched recently suggestion of using the space key to help sauder back in place. but when I try this the results are the connection is brittle.. and will not keep it in place. Suggestions please.

@uFixTek 2 года назад

yes when removing it the black paper or the old keyboard doesn't matter how it comes out as long as you remove it, just place the new keyboard without damaging the black protection. and if you can't use the space bar from old keyboard get a bit of 3d printer filament (PETG)

@smooflarkin 3 года назад

Thank you for the guide. I regret ever getting this thing. What a nightmare replacing the crappy keyboard. I think I'll just use an wireless usb keyboard instead. Never buying a gaming laptop again!

@uFixTek 3 года назад

PC for gaming its always the best if you have the space and time to use in one place, gaming laptops designed the way to make it hard to one to be able to replace parts or upgrade or service. and they are designed to fail after the limited time warranty , they have come up with their own section for durability and longevity, so they can sell extended warranty and or have people comeback to them for service. the laptop industry is no longer as good as before, where they had one mission one option! make them the best and last longer and upgradable! now its the war between them the war of who can sell the most and benefit the most from (extended warranty and service), *DLC. and they are attacking poor people and rich people, there is no best laptop out there, dont take me wrong, by saying best! by best i don't mean the best cpu or ram or GPU power. the best as in durability 0% marketing and so called DEFECTIVE HEATSINK, there was no defective heat sink back in old times where we had less knowledge of cnc machines, i can keep going on but as a tech service view i can say that there is no best laptop! Thank you for the feed back and support to the channel :) good luck

@danielsterling4918 3 месяца назад

@@uFixTek I've had this laptop for about 6 years now and I've upgraded the very easiest parts I could, replaced thermal paste, and cleaned it regularly and properly. Recently I've been having what seems to be overheating issues, with no over clocking, fans not broken, proper thermal paste application. I think the heat sink failure you speak of is interesting, I'm not a technician or anything but it seems that it's causing issues I've never had before up until about half a year ago. I'd be interested to find good resources online to learn more about these things and "go down the rabbit hole" on these subjects if you have any suggestions. Thanks and any info is much appreciated!

@michaellagamon 2 года назад

what plastic did you melt so you can fix it back? is it the plastic from the glue gun? thanks!

@uFixTek 2 года назад

Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P Regarding your question: i used the soldering iron and i removed the keys from old keyboard and use to melt on the new keyboard remove the space bar from old keyboard and melt that. if you have a 3d printer filament use that.

@michaellagamon 2 года назад

@@uFixTek oh yah 3d printer filament! Thanks im replacing the keyboard of my gl552vw. I already disassembled. Waiting for the part and then i will do it like how you did it. Thanks!

@uFixTek 2 года назад

here watch this video after 13min: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aautKZufpno.html here you can see what i mean by using old keyboard keys.

@farishtajayas8645 4 года назад

can anybody give me a backup of the esupport folder of this laptop? I wiped my computer and nothing works now :(

@uFixTek 4 года назад

go to www.microsoft.com/software-download/windows10 and download the windows on your usb drive and install fresh if you wiped out your computer.

@nenenenenene11 4 года назад

I need ASUS ROG GL502VT Touchpad repair video

@uFixTek 4 года назад

okay i will do one i added to the list. thank you for the feedback

@JerryLoffelbein 2 года назад

Oh boy. Used this for replacing the keyboard on the GL504 as it's constructed about the same. Had no idea they used plastic rivots 'til I got down to that plate. My GL504 has been a nightmare. GPU fan failed completely within the first 9 months, and it took 4 trips to their repair department before they replaced the system altogether. A CPU fan died in the replacement system shortly after the warranty ran out, so I replaced that. Now, the GPU fan will randomly spin up to maximum (6400 RPM) without a way to control it and I've lost functionality of some keys. It's not sold anymore, but wow this model had problems.

@uFixTek 2 года назад

Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P Regarding your situation: oh boi i can tell you that how much we see this models come to the store for fan repair and so much other issues that they have, every client that comes in the store with this laptop they are supper angry and want to smash it once i tell them about the issues that they are going to face. this laptop is a money bleeding machine

@kszesiek 5 месяцев назад

Thanks for this comment! My GL504 has randomly decided it wouldn't register 9 of the keys on its keyboard anymore (including Enter), so I was looking for some tips on how exactly the repair looks like since I've heard it's kind of a nightmare, thanks to the video and your comment I roughly know what to expect now. As for other problems with my laptop, the minijack gave up in the first 2 years of its life (I had the main board replaced under warranty) and the usb ports aren't always working correctly with connected devices (fortunately changing the port usually solves the issue). No problems with fans though, apart from occasional loudness which is typical for this model I suppose. I went for ROG to avoid poor quality problems in the future, ha ha. I hope their newer models are less prone to defects...

@TheFloatingSheep 3 года назад

oh god, I didn't expect the process to be so gruesome I got a fx502v and seems like the build is pretty much the same So I guess I got a hell of a day tomorrow, better warm up that soldering iron lmao

@uFixTek 3 года назад

ya unfortunately its a walking in hell, but take your time and you will be fine i dont do all the ping one and skip next and it will be just fine. good luck :) thank you for the support

@TheFloatingSheep 3 года назад

@@uFixTek What type of plastic welding rods do you normally use? I have ABS, PVC, PP and PE but I have no idea what plastic Asus used in the factory, I wouldn't wanna mismatch it of fear it might not bind well if it's not the same polymer Thanks for your help, your channel is great, most informative on youtube by far

@uFixTek 3 года назад

okay dont buy any plastic rod or anything just remove the space bar from the old keyboard and use that as extra plastic :P its the same type of the plastic as the base so it will bond better. and you not going to use the old keyboard anyways :) and thank you for the sub :)

@TheFloatingSheep 3 года назад

@@uFixTek oh that's a great idea, thanks

@sabeerkhan.75 3 года назад

What should we do if our rubber cup of keyboard is broken and glued part of rubber is also broken? When I replaced the rubber cup my key is not working anymore, should I glue the rubber cup to make the key working again?

@uFixTek 3 года назад

by "rubber cup" what you mean? upload some pictures imgur.com/ and let me me see what you talking about.

@sabeerkhan.75 3 года назад

@@uFixTek I am talking about silicone rubber that acts like a spring but when i replaced the rubber dome the key is not working as the top layer of membrane is not working Can you clarify what can be done: rubber cup replaced, old one is broken imgur.com/gallery/bfPuMeF

@uFixTek 3 года назад

okay before anything i need to know if you remove the rubber dome, and when you press or touch with your finger tip the key does work and shows the letter on the txt file, if so then your membrane is fine, and then you can just replace the rubber dome, but your rubber dome looks fine in the on that shot. you will need to place a very small amount of glue on the outer shell and place it in the center and let it dry for few hours and it should work fine, we do repair then often, but make sure your membrane is working and responding to touch.

@sabeerkhan.75 3 года назад

uFixTek Unfortunately, Membrane is not responding to touch but beneath that layer the touch responds.

@uFixTek 3 года назад

so you need to find a old none working keyboard and try to remove the cup prom them and hope to have the same height, and place it in there, else you will need to replace the keyboard :( or use external keyboard :(

@LLukasrealista 4 года назад

What about using super glue instead of soldering?

@uFixTek 4 года назад

it wont even last two day

@adrianputra2629 3 года назад

Hey, i was wondering, i have the exact same laptop and my problem is that i can power on the laptop but the keyboard doesn’t work at all even from cold boot (cannot even go to bios). Will a keyboard replacement fix it or it is a motherboard thing thats broken? Because i can’t spare $50 for something that isn’t broken..

@uFixTek 3 года назад

Thank you for the feedback and your support to the channel :P regarding your question: none of the key respond?? IF no key is working , then its not your keyboard, DO NOT CHANGE KEYBOARD! i need you to report to me with the next results: #1. power off the laptop #2. Press and hold the F2 button , then click the power button. DO NOT RELEASE the F2 button until the BIOS screen display. #3. let me know if you could get into the bios using your keyboard, if you have to press other key to get to the bios do so, but still let me know if you could get in. #4. dont change anything in bios simply shutdown and reboot and use your laptop as you wish till next instructions.

@adrianputra2629 3 года назад

@@uFixTek hey, thank you for your reply. I’m able to get to the bios now. I rebooted and What should i do next?

@uFixTek 3 года назад

@@adrianputra2629 so you got to bios with your keyboard>??? if you you will need to back up your files using external keyboard and mouse and format your laptop and issue fixed my friend,. IF you got to bios by using your keyboard. do you know how to format windows?>

@zollloo Год назад

Hello. I have a same problem. And i did format my laptop several times. But still doesn't work. What's the problem is that?

@joeyosei9607 Год назад

Were you able to fix this issue?

@omedialt 3 года назад

Hey i have asus rog strix gl502vmk, so its tunderbolt v2 or v3 ? 20gbs or 40gbs ?

@uFixTek 3 года назад

thank you for the feedback and support to the channel, regarding your question , the asus rog strix gl502vmk used Thunderbolt 3 via USB Type-C (40 Gbps) but remember your components SSD and or the devices must support TB3 40Gps in order to get 40speed. good luck

@omedialt 3 года назад

@@uFixTek hey thanks for replay, asus support says its 20gbs and my manual says its usb c gen 2 10gbs and you saying its thunderbolt 40gbs , how to check by myself on laptop?

@uFixTek 3 года назад

okay 1st of all dont ever listen to asus or hp or any tech support they dont know SH***T. there is an issue with windows 10 updates and chip xg2, but there is a solution, you need to install windows 10 without the internet connection and use a 2nd computer to download and follow the steps: Here's a few steps to how you can get it working: 1. DOWNLOAD and INSTALL the latest Thunderbolt 3 firmware from the XG Station 2 support page. 2. DOWNLOAD and INSTALL the Nvidia Driver provided on the XG Station 2 support page. 3. DOWNLOAD and INSTALL the ROG XG Station Hot Plug tool from the XG Station 2 support page. IMPORTANT NOTE: Download these drivers using a second computer, and make sure your laptop is never connected to the internet, this will cause Windows10 to automatically update the driver. Install these programs while your laptop remains offline. 4. A few restarts, and everything should be in working order. It is now safe to connect to the internet. The GL502VM does fully support Thunderbolt 3 with 40Gbps

@omedialt 3 года назад

@@uFixTek thanks i will try , the main thing why im looking to know exactly speed, i want to buy ultrastudio monitor 3g (they have with tb2 or with tb3 versions) I want to connect my monitor thru this adapter to ger better colors So before spending money i want to know if it gonna work And all internet is confusing to me.. P.s on my asus on thunderbolt socket there no lightning sign, only “ss” Update: i have installed xg-station hot plug tool, my latest version of thunderbolt software si 16.3.61 and i cant install asus rog xg station 2 software cuz i don't have station and also message says "no active asus rog xg station found'' So all i need to knowi if ultrastudio monitor 3g gonna work with my asus and Benq PD2700Q 27 monitor ;D

@uFixTek 3 года назад

i have a friend that has ultrastudio monitor 3g, let me talk to him and i get at you tomorrow. as far as i know it will work but let me get a 2nd answer. remind me in 12h :)

@yodaspirit6426 2 года назад

thank you with that. i'll order only the keys that are broken on the keyboard instead of doing all this

@uFixTek 2 года назад

Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your situation: make sure that you get the hinges for the keys too.

@RODRIGOX9293 4 года назад

YOUR COULD PLEASE A SUS ROG Strix g731gu Keyboard removal, disassembly guide PLEASE

@uFixTek 4 года назад

i will try to get my hands one one :)

@RODRIGOX9293 4 года назад

@@uFixTek please

@6apa6aw72 2 года назад

Металлическая пластина не отклеилась спустя 2 года?))

@uFixTek 2 года назад

нет мой друг все хорошо даже после двух лет. :)

@manathegreat82 3 года назад

I did this on my GL702v and now it will not turn on. The screen stays black keyboard does not light up and the fans do not turn on. I was extremely careful and did thought it all went smooth. So disappointing.

@uFixTek 3 года назад

you may have connected the flex cables correctly double check your connections, if you can send me a picture of the motherboard with cables connected. so i can help you out.

@manathegreat82 3 года назад

@@uFixTek I appreciate your help. I took everything off and put it back together again and it turned on. But now my touch pad isnt working. Lol!! When I push fn+f9 it keeps saying touch pad disabled. This thing is determined to piss me off. But not today 😃

@uFixTek 3 года назад

im glad that you got it working regard to touch pad go to bios and activate touch-pad "basic" or if it is on basic change it to advanced. let me know

@TheUseris Год назад

How much ram it is

@uFixTek Год назад

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: here is the video for the ram: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jZAe2WAdA2Q.html the ram that comes with this model is 8GB you can upgrade to 32GB

@TheUseris Год назад

@@uFixTek thank you

@uFixTek Год назад

its my pleasure

@deanclark4212 4 года назад

why did you not put any footage of replacing the plastic rivets, should cover the whole process, can you not just put a small drip of fast drying super glue on it and hold it there?

@uFixTek 4 года назад

because i did that on the other table and it just simple process you hold the keyboard and using a hot metal or soldering station melt the plastic and place it i will do a short demo of that in the next two days.

@Hastur_TKY 4 года назад

Welp, my battery won't come off so easily,so the battery connector was ripped off from the mother board :(

@uFixTek 4 года назад

can you provide some pictures of the damage or anything?

@Hastur_TKY 4 года назад

@@uFixTek not now, but there is 5 'pins' and another 2 that hold the connector ,so the connector is ripped off from the motherboard,2 of the connectors on the motherboard have the pads from the black cable ,I think it's fixable ,but a lenz is definitely needed

@uFixTek 4 года назад

if the pads are ripped dont worry you will need a lens and a soldering iron and some flux and abit of cable, its reparable but again i need to see a closed up picture to be able to assist.

@Hastur_TKY 4 года назад

imgur.com/gallery/O0nvbZG ,here is a closer look

@uFixTek 4 года назад

give me few hours and i will Photoshop over and send you info back.

@gl-bm8vq 2 года назад

Well, the crucial part of this video is missing and without it, it's the highest level of BS, yet, it still helped me fix my son's laptop. The crucial part, that he conveniently skips over, is the re-mounting of the keyboard. As the case is made of ABS he suggests melting an 'ABS rod', available from hardware stores, with your soldering iron, drip the molten plastic on the posts, and he says it will be good as new. It won't be. The 'rod' he speaks of is most likely ABS filament for 3D printers. It's really cheap and you can get it at many stores. However, the temperature range between melting and burning ABS is tight, and unless you have a soldering iron with controlled temperature you will burn it. Even then, the molten ABS will not stick to the solid one, unless the solid one is preheated to between 105C and 110C. (Look up the necessary bed temperature used by 3D printers for ABS). So don't even try. Use J-B WELD High Strength Plastic Bonder. It is formulated to work with ABS. You will have to make sure you clamp the keyboard and the ABS housing tight together, so they don't move relative to each other. I used skewer sticks underneath, between the rows of keys, and used small pieces of wood as levers and small wooden blocks as supports with carpenter clamps to press and hold them together.

@uFixTek 2 года назад

Awesome idea, good options and thank you for the feedback, this video is an old video, on the new videos i have mentioned using the ABS filament for 3D printers, or the best and free ABS plastic is to rip a key (space bar) from the old keyboard and use it to melt on the plate, and i use a soldering iron and set to 380C but once you start melting the plastic as you say i push down the new plastic with soldering iron to the old one so it mixes, it works like a charm all the time, i had zero issue with my clients and i do replace a lot of mesh keyboards weekly, just use the space bar from bad keyboard. but again as you mentioned if people have time and know how to mix glue and wont make a mess sure thing glue that, but if in the future you want to replace the keyboard... well good luck removing the glue :P again much appreciate the feedback. here is a video i made a very quick run down of the how to : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m3zuNBASGCY.html here is another video newer that i show the steps check @16:30 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xsg-Zn80hZQ.html

@gl-bm8vq 2 года назад

@@uFixTek Oh, OK, I have searched for the model number of the laptop and this came up, so I was not aware of your newer videos. I tried to melt ABS and fuse it onto the posts but my soldering iron has high and low settings only, so I could not control the temperature and although they looked OK the new heads I made popped off way too easily. Cured epoxy can be removed, however most likely you would have to use solvents as well and not just chisel it off. I'm sorry if my review sounded too negative, I got suspicious something was amiss because you skipped the remounting steps in the video. Having said that, your video still saved us a lot of time and money. Thank you!

@uFixTek 2 года назад

its my pleasure, its okay my friend. my purpose here is to help as much as i can for anyone in need, i try to stay on top of the comments and help out, i have my repair shop for over 18 years and giving back and help people its a good option :) im trying to keep all the repair and servicing on the DIY level so people can do it at home and save money. im very glad that you got the keyboard replaced and thank you for the feedback and your options for viewers. if anything i could help you in the future feel free to ask me in any of my videos, and i be glad to assist you. good luck

@corens1033 2 года назад

@@uFixTek is it the same keyboard procedure for the ROG Strix GL503?

@uFixTek 2 года назад

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: yes it's almost identical same exact logic , if you need any help let me know