Тёмный

Auto-Cross Fox Body Gets Its 6-Speed And Roll Cage : Part 3 - Engine Power S1, E16 

POWERNATION
Подписаться 1,6 млн
Просмотров 92 тыс.
50% 1

Team sets up their Fox-body Mustang for the track with roll cage, buckets, rear seat delete plus trick fuel and exhaust systems.
Part 1: Coyote Aluminator V8 Turns a 4-Cylinder Mustang Into Auto-Cross Beast: Part 1
• Coyote Aluminator V8 T...
Part 2: High-Grip Race Suspension Conversion For The Fox Body: Part 2
• High-Grip Race Suspens...
Follow POWERNATION Everywhere:
www.powernation...​​​​​​​​​​​
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Magnaflow: Muffler, Race Series, 3.00 in. Inlet/3.00 in. Outlet, Stainless Steel, Polished, Each
More Info: pntv.us/pn_pt_...
American Powertrain Systems: New Tremec MAGNUM 6-Speed for Ford, 26-spline input, close ratio
More Info: pntv.us/pn_pt_870
American Powertrain Systems: Pro-Fit Magnum Installation Kit for 1983-92 Mustang
More Info: pntv.us/pn_pt_869
BBK Performance: X-Pipe, Coyote Engine Swap, Full-length, Steel, Aluminized, Catalytic Converters, Ford, 5.0L Modular, Each
More Info: pntv.us/pn_pt_858
BBK Performance: Headers, Engine Swap, Full-Length, Steel, Silver Ceramic Coated, Ford, 5.0L Coyote, Pair
More Info: pntv.us/pn_pt_857
Derale Performance: Electric Fan, Dual, 12 in. Diameter Fans, w/Shroud, 24.000 in. Width, 17.000 in. Height, 4.50 in. Thick, Each
More Info: pntv.us/pn_pt_859
Dupli-Color: Paint, Self-Etching Primer, Flat, Green, 12 oz., Aerosol, Each
More Info: pntv.us/pn_pt_847
Dupli-Color: VHT, Paint, Roll Bar, Epoxy, Gloss, Black, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_852
Earl's Performance Plumbing: Hose Mounting Clamps, Cushioned, Aluminum, Natural, One 1 in. Diameter Hole, Set of 5
More Info: pntv.us/pn_pt_856
Earl's Performance Plumbing: Hose, Super Stock, Rubber, Blue, -8 AN, 20 ft. Length, Each
More Info: pntv.us/pn_p_854
Earl's Performance Plumbing: Hose, Ultra-Flex 650, Kevlar, Black, -10 AN, Each
More Info: pntv.us/pn_pt_855
Edelbrock: Intake Manifold, Performer RPM Air Gap, Dual Plane, Aluminum, Natural, Square Bore, Chevy, Small Block, Each
More Info: pntv.us/pn_pt_874
Holley: Fuel Pump, Electric, 36 amps, 140 gph, 80 psi, -10 AN O-ring Female Threads Inlet/Outlet, Gasoline, Diesel
More Info: pntv.us/pn_pt_853
Koul Tools: Hose Assembly Tool, EZ-On AN Hose Press, Each
More Info: pntv.us/pn_pt_850
Lizard Skin LLC: Sound Deadener, LizardSkin Liquid Ceramic Insulation, Spray-On, 2 Gallons, Each
More Info: pntv.us/pn_pt_848
Loctite: Adhesive, Rearview Mirror, .3cc, Each
More Info: pntv.us/pn_pt_873
Sparco: Harness, Street, 4-point, Pull Down, Nylon, Black, 2 in. Width, OEM-style Latch, Clip-in, Each
More Info: pntv.us/pn_pt_862
Summit Racing: Radiator, Performance Fit, Aluminum, Natural, Ford, Each
More Info: pntv.us/pn_pt_860
American Powertrain Systems: Street Slayer Clutch Assembly
E3 Spark Plugs: E3 Diamond Fire Spark Plugs
Glenn's Performance: GP 03-04 Cobra Tank Conversion Kit (1979-1997)
Maximum Motorsports: 1979-93 Mustang hardtop, Street/Strip: 6-pt, standard door bars, removable harness mount, Low Slung Door Bar option for Fox HT Mustang
Scott Rod Fabrications: 1979-1993 "Fox" Inner Fender Panels Aluminum Installed with Pop Rivets, contoured
Scott Rod Fabrications: 1979-1993 "Fox" Rear Seat Delete Kit, Coupe
The Industrial Depot: Fasteners, Hardware and Shop Supplies
TMI: 1992 Mustang Sport R500 Upholstery, 2 Replacement Bucket Seat Foams, Red Stitching & Insert Stripes

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 88   
@ROYCE415
@ROYCE415 3 года назад
Love it when they work on Foxbodys. It’s crazy they are considered “classic” now
@andymartin4747
@andymartin4747 3 года назад
I was a 7 when the last one rolled off the line and as a kid I hated them. Swore they weren’t a “real” mustang. But now that I had one I actually have a soft spot for them.
@MrCheckster2000
@MrCheckster2000 3 года назад
Specially when I remember buying a new 90 5.0 red coupe off the show room floor like it was yesterday....lol. $12,500 out the door.
@nexgencarguyscraig331
@nexgencarguyscraig331 3 года назад
I’ve got a 1991 Foxbody LX hatch 5.0 I’m 22 so the car is 8 years older than me 😂😂. I’ve had other body style mustangs, but I keep going back to the foxbody. There’s nothing like them.
@MrCheckster2000
@MrCheckster2000 3 года назад
@@nexgencarguyscraig331 no there's not, they're fun cars.
@andymartin4747
@andymartin4747 3 года назад
@@nexgencarguyscraig331 they are fun cars. My mustang is a 65 and is 22 yrs older than me lol. My fox was made a couple of months before I was born
@bluray1522
@bluray1522 2 года назад
is the next part out to this series? i wanna see this beast driving and painted
@CrankAddict
@CrankAddict 3 года назад
LOL The fan shroud was installed upside down! When those flaps loosen up with age, the fans won't be able to suck them closed because they'll be flopping around. It'll work fine on the track but your mustang is going to overheat in traffic.
@mikeg4163
@mikeg4163 3 года назад
Ha...you’re right...rookies
@davidbuffum4887
@davidbuffum4887 3 года назад
When was this filmed? Pat has been around on power nation for a long while. He's not new.
@alexyoungberg5232
@alexyoungberg5232 2 года назад
They're saying he's on this show now.
@jayb3337
@jayb3337 2 года назад
Where is the next episode on this?
@MrBoondocker247
@MrBoondocker247 3 года назад
If E3 spark plugs work as well as your claiming and reduce pollution like you're claiming then why are they not factory original parts because the factory is always being inundated with lower emissions standards?
@defiantance
@defiantance 3 года назад
The same reason car companies uses exhaust manifolds instead of headers: cost.
@StreetSic
@StreetSic 2 года назад
Also interesting how they gapped the hell out of the E3 spark plug to make it look like it had a bigger spark.
@hoonaticbloggs5402
@hoonaticbloggs5402 2 года назад
Yes the plug thing is BS
@Wayno228
@Wayno228 2 года назад
Is there a part 4 yet
@eleazarsanchez96
@eleazarsanchez96 2 года назад
When will we see it out on track?
@DallasRUSHian
@DallasRUSHian 3 года назад
Did they ever show this car on the track?
@lawrencefoster2120
@lawrencefoster2120 3 года назад
The suspension is what we have waited on for so long. And if you have property you can take advantage of time and build something nice.
@FarmerDrew
@FarmerDrew 3 года назад
Amazing! 🏆 I've been going to autocross since I was little, my uncle is big on the Rocky Mountain SCCA, he helps design and put the tracks out, stored and drove the cone truck for years. We would have laughed at this in the 90s/00s this was a joke, but nowadays, with these readily available parts, this is a truly formidable setup to make a cheap track car.
@antonior2944
@antonior2944 3 года назад
He sprayed the floor with no respirator
@troydority265
@troydority265 3 года назад
Why would you use grade 5 bolts on a roll cage like that? I would gone with gr8 fine thread on that 11:57
@corybenton1487
@corybenton1487 Год назад
all that and no track action to back it up
@FarmerDrew
@FarmerDrew 3 года назад
Makes me want to lighten up my S197, swap the suspension, and go kill some cones.
@dcgeeked8917
@dcgeeked8917 3 года назад
do it
@edwardmyers1746
@edwardmyers1746 3 года назад
That .63 OD is impressive, will certainly help offset tge top end deffeciencies of 4.10's
@theANGRIERone
@theANGRIERone 3 года назад
Congrats on the 1 Mil!
@alanhill5513
@alanhill5513 3 года назад
Mike Galley introduces Pat Topolinsky as a permanent member of Engine Power. “And then........”
@460capri
@460capri 3 года назад
In the title and several times in you comments you call the 6 point a cage its not a cage . Its a roll bar and you said that 1 time . Please get it right so others folks understand the difference between a roll bar and a roll cage . Other than that nice job .
@Athletesperformance1
@Athletesperformance1 Год назад
Why the solid axle. If you go 4v BIG you gotta go IRS.
@Wayno228
@Wayno228 2 года назад
Does anybody believe those e3 spark plugs and or use them
@hoonaticbloggs5402
@hoonaticbloggs5402 2 года назад
The spark plug advertisement is bullshit
@AndyFromm
@AndyFromm 3 года назад
Sweet
@shaneintegra
@shaneintegra 3 года назад
I like the Dyno guy. Hes got a good vibe about him
@lawrencefoster2120
@lawrencefoster2120 3 года назад
The ford model T had a wooden clutch plate.
@cliffordgill9052
@cliffordgill9052 3 года назад
You guys really think I'm not gonna fast forward through your five minute spark plug commercial?🙄
@mkmkmk1337
@mkmkmk1337 3 года назад
Did I miss the upload for part 2? I know there is part 1 and now part 3.
@mkmkmk1337
@mkmkmk1337 3 года назад
@Wayne Flanigan Thanks Wayne. I searched for "fox body" and then "auto cross" and didn't see the part two but searching for "fox body 2" pulled it up quickly. Thanks again.
@jonstrande2074
@jonstrande2074 3 года назад
....and the EPA wants to ban any modifications to motor vehicles. Even if what you are doing is more efficient than stock....
@2jzfrank
@2jzfrank Год назад
Amazing work you guys did, I been looking for that radiator you guys showed there I can’t find it no where ?
@24theMoney
@24theMoney 4 месяца назад
Where is the video of the finished car?
@jimmymccormick142
@jimmymccormick142 Год назад
Awesome car Ford power forever baby
@miquerto
@miquerto 3 года назад
I love seeing Pat on all the shows. More please.
@melhormecanicosorocaba
@melhormecanicosorocaba 3 года назад
Os cara é fera
@wilburwhipplefilter2531
@wilburwhipplefilter2531 3 года назад
Every fox body I've worked on the floor board was spider cracked everywhere, even the firewall.
@DOCTRJ
@DOCTRJ 3 года назад
Thanks for all the time and effort guys i really appreciate it! and the clear explanations, i could never afford to build my dreams but they are still alive 🤠🇳🇿🌄
@kage3305
@kage3305 2 года назад
Great video! Did this project come to a hault? I don't see anymore vids
@anubistheadversary4043
@anubistheadversary4043 2 года назад
Ok, so you guys literally just built my dream car, how much?
@shawnsee2688
@shawnsee2688 3 года назад
I take my rear view mirrors off on vehicles I can. Im tall, damn thing is in my field of view.
@triggerwarning2439
@triggerwarning2439 3 года назад
Please load the vid of the ford 300 turbo test you just did the other day please
@lawrencefoster2120
@lawrencefoster2120 3 года назад
I'm surprised you didn't put sound that reduction adhesive that iv see used.
@adjacentchannel
@adjacentchannel 3 года назад
Awesome to see an Autocross Mustang being built on your show! Only slightly disappointed it isn't a 94-98 body style.....
@johntexan4165
@johntexan4165 3 года назад
Couldn't you use a hydramat for that fuel issue you discussed?
@jcuprisi
@jcuprisi 3 года назад
I hope you never have to use the roll cage with those Grade 5 fasteners.
@reggiekeene
@reggiekeene 3 года назад
Still waiting on more content for the trash hawk Wagoner.
@SykesEnglishBulldogs
@SykesEnglishBulldogs 3 года назад
E3. Is garbage
@JUNKYARDGTO
@JUNKYARDGTO 3 года назад
What's going on with the cage?
@THROTTLEPOWER
@THROTTLEPOWER 3 года назад
Always enjoy!!!!!!!!!!!!!!!!
@bitcoinryan915
@bitcoinryan915 3 года назад
TAFFR
@xiiientertainment2239
@xiiientertainment2239 3 года назад
E3s are the only plug I use in my pony
@agustinflores2732
@agustinflores2732 Год назад
How do I watch the whole series of this
@superior3384
@superior3384 3 года назад
This guy is the engine whisperer
@ZayedGR
@ZayedGR 3 года назад
congrats for 1M subscribers
@marksteverman1622
@marksteverman1622 3 года назад
go MTU
@johnmirbach2338
@johnmirbach2338 3 года назад
😁🖖👍👌✌😎
@masonmayert1851
@masonmayert1851 2 года назад
Is there a part 3?
@melchristian8876
@melchristian8876 3 года назад
👍👍👍👍👍👍👍👍
@superior3384
@superior3384 3 года назад
Now I have to check E3 vs all on RU-vid. Are you sure E3 is that good?
@subiemon
@subiemon 3 года назад
i use them in my 2001 jeep wj!!
@superior3384
@superior3384 3 года назад
@@subiemon ... are they any good?
@subiemon
@subiemon 3 года назад
@@superior3384 I love them.
@superior3384
@superior3384 3 года назад
@@subiemon cool I'll get some of those next. Thanks
@lonestar8190
@lonestar8190 3 года назад
Why wouldn’t you use a sold rear axle? 9bolt would of been a better option
@chrisvela5462
@chrisvela5462 2 года назад
The 8.8 they used is a solid rear axle.
@sav22rem22
@sav22rem22 2 года назад
IRS is so much better for handling
@clevelandmaker386
@clevelandmaker386 3 года назад
I wonder how much all this costs?
@JBarnes917
@JBarnes917 3 года назад
If you have to ask….
@ThaMetalMan
@ThaMetalMan 3 года назад
Hell yeah
@THROTTLEPOWER
@THROTTLEPOWER 3 года назад
I agree!!
@sammymendezjr1864
@sammymendezjr1864 3 года назад
No budget builds on this you tube channel 😔 can't afford this stuff
@basshead.
@basshead. 3 года назад
1st
@rcbohno
@rcbohno 3 года назад
2nd
@urielventris4917
@urielventris4917 3 года назад
another fox body...geez
@urielventris4917
@urielventris4917 3 года назад
@@bigboreracing356 I don't disagree; however, my comment relates to the sheer mass of fox body builds. I was hoping for something with a bit more steel. You are absolutely right about the "home run" though.
@LordMustangGT93
@LordMustangGT93 3 месяца назад
you mean a 10an feed and 8an return.
Далее
Свадьба Раяна Асланбекова ❤️
00:12
Обменялись песнями с POLI
00:18
Просмотров 159 тыс.
I Rebuilt An UNFIXABLE Boss 302 Mustang!
48:00
Просмотров 391 тыс.
VW MK1 DERBY. Fitting a Ducati V4 engine
18:40
Просмотров 7 тыс.
Building a CAT 3126 swapped F350 in 30 MINUTES!
27:23