Unleashing a Boosted 347 Small Block Ford - Engine Power S2, E20

Подписаться 1,6 млн

Просмотров 837 тыс.

50% 1

The team takes their wild 347 Ford to Stage 3 with Hellion 76mm turbocharger, making massive power on race gas.
PARTS USED IN THIS EPISODE:
Air Flow Research: Cylinder Heads, Competition Porting, Aluminum, Assembled, 58cc Chamber, 195cc Intake, Ford, Small Block, Pair
More Info: pntv.us/pn_pt_11334
ARP: Cylinder Head Studs, Pro Series, 12-Point Heads, Ford, 289, 302, with Stepped Washers, Kit
More Info: pntv.us/pn_pt_11353
Clevite: Rod Bearing, H Series, Standard Size, Tri Metal, Chevy, Checker, 200, 229, V6, Each
More Info: pntv.us/pn_pt_11359
Clevite: Main Bearings, H Series, Standard Size, Tri Metal, Ford, Lincoln, Mercury, 221, 260, 289, 302, Set of 5
More Info: pntv.us/pn_pt_11358
Clevite: Main Bearings, H Series, Standard Size, Tri Metal, Ford, Lincoln, Mercury, 221, 260, 289, 302, Set of 5
More Info: pntv.us/pn_pt_11357
Cometic Gasket, Inc.: Head Gasket, MLS, 4.100 in. Bore, .027 in. Compressed Thickness, Ford, 289, 302, 351W, Each
More Info: pntv.us/pn_pt_11360
Comp Cams: Pushrods, Hi-Tech, Chromoly, Heat-Treated, 5/16 in. Diameter, 6.200 in. Length, Universal, Set of 16
More Info: pntv.us/pn_pt_11362
Dart: Engine Block, Cast Iron, 4-Bolt Mains, 4.000 in. Diameter Bore, 1-Piece Rear Main Seal, Ford, Small Block,Each
More Info: pntv.us/pn_pt_11342
DSS Racing: Main Cap Girdle, Billet Aluminum, Ford, 302, Each
More Info: pntv.us/pn_pt_11347
DSS Racing: Windage Tray, Billet Aluminum, Ford, DSS Support, Each
More Info: pntv.us/pn_pt_11346
Dupli-Color: VHT, Paint, Wrinkle Plus, Black, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_11331
Eagle Specialty Products: Connecting Rod Bolts, 12-Point, Cap Screw, ARP 2000 Series, Eagle Rods Only, Set of 8
More Info: pntv.us/pn_pt_11361
Eagle Specialty Products: Engine Rotating Assembly, Competition,(ESP)Forged Crank, Forged Mahle Pistons, H-Beam Rods, Ford, Small Block, Kit
More Info: pntv.us/pn_pt_11338
Edelbrock: Intake Manifold, Victor Jr,, Single Plane, Aluminum, Natural, 4-Barrel, Square Bore, Ford, 4.7L, 5.0L, Each
More Info: pntv.us/pn_pt_11336
Edelbrock: Intake Manifold, Super Victor, Single Plane, Aluminum, Natural, Square Bore, Ford, 289/302, Each
More Info: pntv.us/pn_pt_11339
Federal-Mogul Corporation: Fel-Pro, Gaskets, Intake, Composite, Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set
More Info: pntv.us/pn_pt_11356
Holley: HP Multi Point EFI Engine Management System, 4 Barrel, 1000 cfm, Kit
More Info: pntv.us/pn_pt_11349
Jesel Inc.: Rocker System, Full Roller, 1.7 Ratio, Shims, for AFR 165-225cc Outlaw Cylinder Heads, Ford, Small Block, Kit
More Info: pntv.us/pn_pt_11341
Jones Machine Racing Products, Inc.: Custom Accessory Drive System Including Water Pump, Alternator, P/S Pump, And Vacuum Pump
More Info: pntv.us/pn_pt_11350
Lunati: Cam & Lifters, 351W, V292HR10
More Info: pntv.us/pn_pt_11335
Lunati: Lunati High-RPM Link-bar Lifters SBF
More Info: pntv.us/pn_pt_11344
MSD Ignition: Distributor, Pro-Billet, Cam Sync/Magnetic, Adjustable Rotor, Ford, Lincoln, Mercury, 289/302, Each
More Info: pntv.us/pn_pt_11351
Quick Fuel Technology Inc.: Carburetor, Black Diamond Q-Series, 750 cfm, Mechanical Secondary, 4-Barrel, Square Bore, Drag Race, Each
More Info: pntv.us/pn_pt_11337
Quick Fuel Technology Inc.: Carburetor, Black Diamond Q-Series, 950 cfm, Mechanical Secondary, 4-Barrel, Square Bore, Drag Race, Each
More Info: pntv.us/pn_pt_11340
Summit Racing: Engine Block, Cast Iron, 2-Bolt Mains, 4.030 in. Diameter Bore, 1-Piece Rear Main Seal, Ford, Small Block, 302
More Info: pntv.us/pn_pt_11333
Total Seal: Custom Pinion Ring Set
More Info: pntv.us/pn_pt_11348
Turboxs: Blow-Off Valve, Type H, Aluminum, Clear Anodized, 10-25 psi, Universal, Each
More Info: pntv.us/pn_pt_11330
DSS Racing: Custom Forged Piston Set
Hellion Power Systems: 79-93 Mustang Single Turbo System, 76mm Precision Turbo GTS (billet wheel)w/ Ball bearing upgrade, and dual Precision Turbo PW46 46mm wastegates upgrade
Loctite: Loctite Ready Gasket (7 oz.)
Lunati: Custom Ground Turbo Camshaft, Hyd. Roller
Pennzoil:

Авто/Мото

Опубликовано:

2 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 689

@PowerNationTV 4 года назад

We'll continue to post these episodes here on RU-vid. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power

@keefespencer1173 4 года назад

Build a boosted 434ci SBC with EFI just like this Ford build but try to get to 1500+hp

@Thelongmanable 4 года назад

PowerNation *_I AM EMBARRASSED BY THIS SHOW!!!!_*

@Thelongmanable 4 года назад

PowerNation *_Guys put the compresson around 12 to 13 to one then.boost the hell out of it.... 1000 hp first pull!!!_*

@Thelongmanable 4 года назад

PowerNation *_

@steveshoemaker6347 4 года назад

Big fun stuff...Thanks a bunch...!

@shaneferrebee9871 Год назад

4:20 the crank looks scratched all to hell.

@jamespazuzuairsoft5369 4 года назад

Once i found a pen in the lifter valley of a 305 chevy, pretty sure Pat worked on the motor after finding that.

@rvsteve583 3 года назад

best comment of the month.

@gettothechase636 3 года назад

Lol!

@dennisroberts2857 3 года назад

Left his calling card behind!

@tmmurphy 4 года назад

Man o' man I'd love that in my '91 Fox. With my poor driving skills and ancient, rock hard tires, just think of the crowds I'd terrorize at my local Cars 'n Coffee!.

@spankthemonkey3437 4 года назад

tmmurphy you would be a legend

@ME-bh9gc 3 года назад

@@LA_Commander can you fit that same block in a fox with small hood scoop

@jbreiter56 2 года назад

Good one!

@downhilldaddy9346 2 года назад

👎🏾

@bobhilly546312156332 Год назад

Not only from hitting crowds but blown tires from the 2-3 shift at 7500rpm

@ricardocorbie6803 2 года назад

That’s a stout package 📦 great job!! That 5.0 & 5.8 Litre were the motor to have in the 90’s and still today 💯🥇❤️❤️❤️

@victorparra4227 4 года назад

I'm a Chevy guy and I like this episodes where they build Fords and Mopars, something new to learn

@villiersman951 4 года назад

i like watching chev builds to and im a ford man

@-OokySpooky- 4 года назад

I'm a Mopar guy and I like watching Mopar builds so I can someday figure out how the actual fuck they work...

@pgtmr2713 4 года назад

Uncle Tony's Garage and Nick's Garage for the old Mopars. Nick's garage will have more of a mix of muscle from all makes. Tony will surprise with something GM or Ford here and there. Both excellent channels. Ford guy but I watch other builds. Really got a kick out of Cleetus getting 1070 out of a GT500 engine. The Chevy engine I want to see is the 90-95 C4 ZR1 Lotus/Mercury engine in some kind of project. Someone had to have wrecked one. 375-425 NA

@pagosplace3065 4 года назад

Yes...come to the dark side!!! Good....Goood!!!

@robertweiser7122 4 года назад

@@pagosplace3065 We have milk n cookies!!

@AndrewEG 4 года назад

Yeh baby ARP bolts to bolt down that oil pan. She won't blow off now

@jonathanbachman2339 4 года назад

Andrew Gallagher A hater will hate. And a dolt will stink. Perhaps you should do a show? You may want to tighten up your spelling and grammar before you have a go. It is quite infantile.

@olderthanyoucali8512 4 года назад

Johnathan Bachman , he was making light of the fact that this is a Summit advertisement. And your amateur psychological analysis shows that you go off half cocked and type before you think, and if you have the ability to reason?, do you?

@jonathanbachman2339 4 года назад

older than you Cali Well Sir you have left no Doubt your I.Q. is between a rock and a plant. Sponsors, advertising and parts donation is why these programs are on television. If you or the other mental heavyweights do not like it turn it off or don’t watch. Posting your adolescent ignorance just proves you have no clue and enjoy trolling. The question good Sir is why would you leave no question your dealing with bad Meth habit. You post’s are seriously ignorant. Before you make anymore posts get your G.E.D. Ask your cell block officer how this can be accomplished.

@philtripe 4 года назад

stock Chevy blows apart at 300 hp so im guessing old Fords are good for 500 or so considering there;s nearly double the bolts on Ford...my old S10 with a mild 305 with about 275 hp used to eat oil pan gaskets

@GreatLakesLogger 4 года назад

Andrew Gallagher Exactly, I never could figure that one out.

@Finite-Tuning 3 года назад

The scariest thing I've ever been in is an early 90's full cage mustang with a "twin" turbo 347. That thing put 1100 to the wheels on a bad day and I'm lucky to be here to tell you that kind of power has no place on the street! That car was just plain stupid powerful and ran 8.50's in the 1/4 mile. I can't remember the MPH, I just remember my fear factor every-time I got into that thing.... That car honestly scared the hell out of me!

@Resistculturaldecline 17 дней назад

600hp to the wheels in a fox body is rowdy on the street, assuming it still retains the chassis & suspension to be a nice driver and isn't predominantly a cantankerous track car. Such a setup on 295 drag radials won't hook up on every pavement surface until up into 3rd gear (3.73 rear gears). I think a lot of guys theorize and imagine how much excess they need and get carried away. Above the level I described, a 3200lbs Fox is really beginning to try to hurt you if some wise restraint isn't exercised. Busting tires loose at 60 mph can go bad really quickly

@Finite-Tuning 17 дней назад

@@Resistculturaldecline: I don't remember the exact tire anymore, but skinnies up front and 10" in the rear. It was a built car, full cage, K member, frame connected, QA1 coilovers, ect. But yes, 3rd gear 60mph that thing just loved to go sideways! On the strip it would leave on 2 wheels, but on the street it always seemed like it was wearing 2 pairs of roller skates. It was a cool car, just friggin scary.

@Resistculturaldecline 17 дней назад

@@Finite-Tuning Sounds like probably a 275 tire, which isn't even beginning to hold back 1000+ hp, not even close. Like putting a bicycle tire on the rear of a Japanese sport bike

@Kyle_Nelson 4 года назад

Beginning of the show: Watch this ford small block make 1,200 HP! End of the show: We ended up at 800, don't talk about it...

@downhilldaddy9346 4 года назад

Kyle Nelson he did say make power safely. There’s no doubt that little engine could be pushed harder. 800 hp in that galaxie is more than plenty

@Kyle_Nelson 4 года назад

@@downhilldaddy9346 I agree they could have turned it up to 50 psi and made 1000 hp but I was just poking fun at the show for making such a bold claim at the beginning and not delivering. Cheers!

@downhilldaddy9346 4 года назад

Kyle Nelson 10-4 I wasn’t trying to be mean mate🤙🏾

@canibmeplz260 4 года назад

Much like the bold claim of reusing the parts the already had, which then turned into just using the crank and rods

@chriswalker5729 4 года назад

Probably has something to do with the nearly 80% I:E ratio, and then making it more like 70% with 1.6s on the exhaust.

@sugershakify 4 года назад

The cracks in the stock blocks actually develop opposite from what he said. They start at the mains and work up to the valleys before performing an impression of a banana split. Thats why the valley girdles developed for these blocks don't do jack.

@SavageBunny1 4 года назад

You guys doing this show again is the best present anyone could want! Thanks guys!!

@chloehennessey6813 4 года назад

Street-able to me means it starts and runs

@dj4monie 4 года назад

Low expectations?

@nathanhighvoltage5259 4 года назад

Shouldn’t you be watching makeup vids

@chloehennessey6813 4 года назад

Nathan Nicholas Garcia 52 Performance Fishing If I should be watching makeup vids this means you should be watching gay porn. 🙄😐

@michaeltorres7709 4 года назад

Ahhhhhh, you roasting em. You like the strokers. Lol jk 😂

@kevindunaway3664 4 года назад

@@chloehennessey6813 oh lawd, I literally spit my drink all over my desk hahahahahah

@bunning63 4 года назад

While those oem blocks Crack at higher levels, at one stage the 302w had the lowest number of warranty claims of any ford engine.

@refiii9499 4 года назад

I’d die for this engine in my 93 mustang. Serious power in the engine. Sounds so smooth too.

@dj4monie 4 года назад

Start saving pennies. You can build up to 500whp on the stock 5.0 block, you'll crack it higher than that.

@garrettrocks9888 4 года назад

REF III I agree😂 I would’ve loved to have a motor like this in my 86 and would love to put one in my 93 now lol

@refiii9499 4 года назад

Anthony Thomas my 93 now has 436hp* not 446hp on the dyno and 347hp at the wheels dynod. She’s a fun car can only imagine what 1,000hp on the dyno would be in a 3k pound car lol. I have every maximum Motorsports mid available now and she handles awesome. Would love to see how one of these Foxbody cars would do with this suspension work and that power. Super nice engine there

@refiii9499 4 года назад

Garrettrocks98 that drive accessory kit 😍. This is a sick set up

@garrettrocks9888 4 года назад

REF III I agree! I said the same thing that accessory drive is sexy!

@JimmysJunk 4 года назад

Ahhh I just got hooked watching these this morning and realized this one was only posted an hour ago! Now I have to wait to see big boost!!!! Great job guys!!

@geoffmooregm 3 года назад

I don't know why but it is satisfying when the biggest displacement is shoved in to the smallest footprint. 347 Windsor, 572 Big Block, 427 Small Block etc. Seems like the best use of real estate to me. Like a Tinyhome for a family 🤣

@gaara10122 4 года назад

Hell thats impressive power even naturally aspirated. Awesome job guys.

@michaelramirez1855 Год назад

Ronnie Crawford makes the baddest 347 bar none.

@jonnygg6594 4 года назад

WTH, So basically stage 3 is a new engine around a turbo?

@boostedsaleen6146 4 года назад

The rods , crank , and heads were reused . Lol

@88_turbo_fox73 4 года назад

Yup.. and that turbo system is around 6I, so much for the average guy doing this

@bmstylee 4 года назад

@@88_turbo_fox73 the average person can afford a lot of nice things if you have a decent job and don't saddle yourself with bad debt and other bad life choices.

@3rd-eye-neenja563 3 года назад

@@bmstylee like a wife

@bmstylee 3 года назад

@@3rd-eye-neenja563 That. Or a divorce with alimony and child support. As a guy you generally are going to get screwed on that front.

@tomnekuda3818 3 года назад

Good analysis and explanation of lobe separation in connection with boosted engines.

@blakeywsr59 4 года назад

Awesomeness, that engine and turbo was just relaxing.

@olderthanyoucali8512 4 года назад

Any part of this build that SAM was involved with, was top-notch!

@ArturoMartinez-cr2kv 4 года назад

This is just what i need for my 1990 notchback 💪🏾💪🏾💪🏾pure HP

@johnbehneman1546 3 года назад

Great video and education. Thanks for sharing. I learned so much about turbos.

@BREW2LFOXBODY 4 года назад

I'll take one of those for my fox PLEASE... 😎

@basshead. 4 года назад

Living that fox life.

@scottsummers8167 4 года назад

Must have been in your recommendations too lol. Just finished watching about your 2nd gear t5 issue earlier

@terrybaptist795 4 года назад

Sure if you want a dart iron eagle block. Your going have to pay to play.

@dj4monie 4 года назад

@@terrybaptist795 You can do it with a Ford Boss block too. Speed cost money that is not the time to cut corners. 300 hp N/A is plenty on the street. That said if you want to play in the big kids pool you better bring 500+ for 4 cylinders and 1000+ for V8's and larger, just the nature of things.

@jarrodholley929 4 года назад

You're coyotes faster

@johnhancock5554 4 года назад

🏁 Totally Tricktastick! You guys rock! 👍👍🇺🇸

@toddclark332 4 года назад

Now that's one good-looking Bad Boy motor guys thanks for sharing

@lewisdeclouette6342 4 года назад

Can't wait and I love that Jones vacuum pump

@richardortiz5783 4 года назад

I would love that engine in my 1960 f100.

@t0mn8r35 4 года назад

This was my favorite engine build.

@Backfire10 8 месяцев назад

I always called foul on these presentaions..However, now that I see Pat has a 63. I'am all in. Nice job fellows. LOL.

@fernandososa5547 4 года назад

More on this build please!!!

@Ricks408 4 года назад

Glad to see this goin into Pats car. That motor will do 150k miles before it'll ever need a freshen up. Great foundation all in all. Look forward to the install and tune vids

@keikun6969original 4 года назад

I'd love to see these guys build a 7.3l diesel powerstroke. See what they can get out of it.

@dj4monie 4 года назад

No more than what others are getting out of them.

@joshtheking1772 4 года назад

There are 10 million of those videos all over the internet.

@howardiknow1133 4 года назад

Four our five hours....

@michaelmcneil5036 4 года назад

Id love to see them not build a complete turd

@wackyfox5046 4 года назад

Nunya Bidness I know a few guys who have built their 7.3s a 6.0 is a much better platform you can achieve much higher numbers

@brian5606 4 года назад

Another combo probably worth noting being a dart block was sourced out is the use of the 4.125" bore block with the same deck height as this one and the use of a 3.250" crank coming out to the same ci at 347. Being the engine is an air pump getting airflow in and out of the engine is paramount. By using the bigger bore block you can utilize a bigger valve in the head making for easier airflow for the turbo to build HP. The shorter stroke makes high-rpm easier to get a better HP number up high. With the top-notch valve train components used in this engine, high-rpm, excluding the cam and rollers this motor should make it's goal of 1200-1250 HP at the crank.

@davidrogers5219 3 года назад

4.125" bore block with a 3.250" stroke and a 5.40" rod length as a lot less rod angle also. Less piston to cylinder wall wear. A lot better way of getting the same cubic inches out of a 8.20" deck height 302 block. And it pretty much cost the same.

@CrzyMav 4 года назад

Wow! That’s some serious horsepower on that little small block

@NVzla 4 года назад

Anyone else notice the wear on crank journal when he measured?

@NVzla 4 года назад

@Bearded Clam You caught that too

@n.shiina8798 4 года назад

saw that clearly

@Gordonseries385 4 года назад

micro groove oiling system

@jessemurray1757 4 года назад

yep and would have taken 1 minute to polish out.

@albertgaspar627 4 года назад

wow, you guys aren't kidding. its real obvious. I mean, to a good engine builder

@Mikey-my2iw 4 года назад

Cool build👍

@orlandourbina9271 3 года назад

Great work guys always the right performance parts 😎✌nice videos though

@CrazyPetez 4 года назад

Nice! Can’t wait to see the engine in the 63 Galaxie.

@jamiemuncy2219 4 года назад

Nice little 347💯 I’ve got a 438 with high compression that ran Nitrous on but... we changed over to turbos and the power curve is AWESOME💯 Had to change fuel to Alcohol and change the cam and a little thicker head gasket but the little SBF makes nearly 2500 at the flywheel, so I’m happy with that💯

@austinpicasso7662 2 года назад

Holy shit

@lanejacobs3937 Год назад

I'm impressed

@Baddeal 4 года назад

Puts the girdle on a dart block that doesn't really need it , but didn't even have the girdle on the stock block to begin with. Lol.

@jasonguy9917 4 года назад

The one single that I love about my V8 Henry's is that the first rebuild is on ford, due to the gudgeon pin offset the factory built into those magnificent motors. This offset allows for the pistons dwell point can be moved from after 0 degrees crank relative position, to a few degrees before 0 degrees indicated. This started the power stroke early also apearing to be a buffer to pingings negative effects whilst utilising the violent increase in combustion chamber pressure as an increase in total torque production . Camshaft valve timing events require recalculation due to change in piston dwell.

@berryfod7670 4 года назад

Love it Ford power baby

@berryfod7670 4 года назад

Lol ford hater. ford first on race day

@berryfod7670 4 года назад

And another thing is If your going to mod your engine I’m a 100% sure everyone goes after market to make it worth your time

@berryfod7670 4 года назад

STREET RACER you are pretty dumb seems to me your a ford hatter and a Chevy fan boy so stick with your shit box Chevy and I’ll stick with my non bankrupt ford power and btw my truck has 447,558 miles on my 1998 Ford F-250 with 5.8 and never been rebuilt and let’s not forget same transmission as well but ford sucks haha get a life Chevy fan boy

@JaegerWrenching 4 года назад

STAGE 3?!?!?! Holy wowie wow! Many horse pressures will be created with this here stage three.

@mattcangie 4 года назад

Love the videos. Great information, details, tips and helpful. NOTE: this is not stage 3 of an engine build. Quote,"That means we're gonna have to change some parts but the majority of them are gonna stay". ....Define majority please. That would require 'at least' retaining the block. Fun to watch regardless

@DavidMoore-br7ge 2 года назад

Yeah think they kept the crank lol

@Izaiah_J 4 года назад

Now I have to build one of these 😍

@ericriddle467 3 года назад

That's a great sounding engine right there pats gonna as have fun with that

@chrishotrod6603 4 года назад

Love to have this in my 87 foxbody. Id put a f1r procharcher on it.

@pagosplace3065 4 года назад

Cannot wait to see that Galaxy run!

@waynec3563 4 года назад

It would have been interesting to see how the manifold modified for efi and the throttle body worked on the first black and blue build before swapping to the Dart block and adding boost.

@ToxicMisfitsYt 4 года назад

Wayne C engine masters done a build on this

@proximap2151 4 года назад

nicely done!!

@1stockcam 4 года назад

Engine stumbles, misses, then comes into boost. Immediately after, “This engine has great manners right out of the gate”

@bluespig1 4 года назад

Written by someone who has never started a rebuilt motor. You & 9 other dickheads know fuck all.

@drtb69 4 года назад

Right!! This video is absurd

@Cas-qb3rv 4 года назад

Believe that's a drop in for my 73 bronco! ! Amazing build

@CritterCustoms 3 года назад

Bad ass video. Almost sounded like some compressor surge was happening though.

@kencohagen4967 4 года назад

What about the Kaase P38 heads? They have canted valves like a Cleveland for better breathing and use standard manifolds to make it easy to find the right intake and headers for your build. I'm looking at those for my project car, if I can get it off the ground! And I like the adjustability of the boost! Mount something on the dash and.....

@Angel-dn9sm 4 года назад

Man love this show

@ldnwholesale8552 4 года назад

Plug the oil drain holes over the cam. Increase the drains front and rear with mesh screens to catch valve train crash. That will decrease windage as well as stiffening the block

@markphilpot8734 3 года назад

This 347 has been a bombass build. Really good numbers and safe tunes mean no blown up engine. That is avoidable. This is mart engine building here ladies and gents. Stay safe mates!😊👍🏻😷

@totallyeinstein5151 3 года назад

You drilled into your Victor jr when you could have just bought the EFI Victor jr intake...why?

@baddonkey6876 3 года назад

I'd like to see you do a similar build of a coyote, be nice to see what similar cubes can do in a more modern block

@NeedForSpeed.2004 4 года назад

My mother is friends with a mechanic who used to be a big time drag racer, and he still has his foxbody Mustang which has a twin turbo 347 making 1,450hp.

@callmetango7193 4 года назад

I love this show

@grizzlybozak 4 года назад

The oil is called Platinum Plus... Also the local strip club😂

@bmstylee 4 года назад

Oil could be used there as well.

@grizzlybozak 4 года назад

The oil is synthetic... ...as is half the girls at Platinum Plus🤘

@crazyeyez1502 4 года назад

Allentown, Pa? 🤣

@panchokid1 4 года назад

South Carolina

@grizzlybozak 4 года назад

Manuel Garza yeah man

@ThePlatypusReturns 4 года назад

they are gonna put it in that galaxy... i want it in my Fox body !!!

@stevesolo16 2 года назад

The Jones accessories are a nice touch. But, it needs more Cowbell!

@applebitefool 4 года назад

@16:00 with the goal of making 1000 hp at the tire, on the chassis dyno😆

@bmstylee 4 года назад

Well. You don't need it in the car to tune it.

@diegoroblez2328 4 года назад

You guys are awesome, but I was wondering why you can't use a flat tappit cam for a roller?

@MikeMiller-fc2cc 3 года назад

Yeah.I was thinking like Pat, yhat sngine would go nice in "MY 63 FAIRLANE" too. LOL

@vulcan-900bobber7 4 года назад

That Galaxy is going to fly

@travisjones592 3 года назад

I'm a Chevrolet man through and through!... But that little ford engine made me stop and think about it. Impressive!

@88_turbo_fox73 3 года назад

These guys need to watch Richard Holder's videos, he says build a good N/A motor then add boost, boost works no matter, I would of made it 10 to 1 then boost

@joegreen4089 2 года назад

if they had just replaced the block and added turbos it would have been a better build for sure. the new cam is very mild and it seems that they were only making 354 ft*lbs and 364 HP na with this combination.

@rayburn2007 2 года назад

Would love to see you guys build an all aluminum dirt track 430 with dry sump

@rdspeedfab 4 года назад

Enjoyed watching the series. But what would be interesting to most average guys... is how to build this power on a working mans budget. A 351w block and a Hong Kong hurricane can make these same numbers for a fraction of the cost. But your setup has a lot of pretty parts!

@jeffschwartz5199 4 года назад

Giddy up Galaxy ☄

@jamesetyrrell13 4 года назад

I'd love to have something like that in my 98 Grand Marquis..it would roll on for sure

@zrxdoug 4 года назад

"We're keepimg most of the parts for this build.." Proceeds to throw out everything but the crank, rods, & heads..

@PatrickAustin 3 года назад

exactly!

@scottcardwell3520 4 года назад

Infomercial!!!!!

@robert23497 4 года назад

Did they upgrade from the arp 8740 bolts to the arp 2000 bolts on the oil pan install too? I'm just curious because of all the oil pans that I've lost while driving over the years......lol.

@robjones1328 4 года назад

look at all those cool parts, guarantee that motor costs more than my house, my daily driver, my pickup truck, and my hot rod put together

@KurtBenning 4 года назад

I bet they do

@robjones1328 4 года назад

Kurt Benning only because they're Ford parts

@shaneharrison4775 4 года назад

If that is going in a 63 galaxy shes surely gonna be a screamer

@buckykattguitar 4 года назад

This motor would be fun in my 64 Mercury Comet Cyclone.

@berkstien1289 2 года назад

@POWERNATION want to point out you adding to the 600hp cracked block myth. I won't deny that the block will crack but it is not associated to a specific hp mark it is due to the internal harmonics of the block. By having the block and rotating assembly Professionally balanced plus running tune to keep the RPM'S low the stock 302 block can see around and over 800hp reliably.

@Gordonseries385 4 года назад

Traveling salesmen daily driver like to see this engine teardown at 300,000 miles nice work guys take care

@mikehaslett3738 4 года назад

Gordonseries385 it’s a race engine. It will never see 300k miles. Maybe 50 if it’s lucky

@voodoo1449 4 года назад

By the look of those NASTY welds on the intake, I knew right away a professional did not do it

@dposcuro 4 года назад

Nope, but giving a new generation a chance to learn some real world skills is great. Besides that, it doesn't have to be pretty, if it works.

@kevindunaway3664 4 года назад

To leave those "gorilla glob" welds on that intake is a travesty. I'm all for helping the younger fellas (if you can find one that will actually work) learn and I certainly don't mind sharing knowledge and experience; BUT don't leave those welds like that! What you lack in welding ability, at least make up for it with grinding skills........ Good day

@alexandermeto 4 года назад

you guys are so cool

@icekilla126 4 года назад

After looking closely at the gasket surface I’m surprised that Intake even sealed

@bmstylee 4 года назад

Someone call wardrobe and get Mike a shirt that fits.

@smithraymond09029 4 года назад

I used to think the same when I would watch this show years ago. Looks wierd.

@duttonsgarage9400 2 года назад

I wonder what this motor would do with some chi high port 3v heads

@jleote 4 года назад

What did you do for the Turbo Oil return? And compressor surge is no bueno.

@antoniopoole5898 4 года назад

Hey power nation. Where can I find the blue prints for this build..

@FreddyFunderbunz 4 года назад

Lets get those turtles excited!!!

@big6red389 4 года назад

Great video would love to see a ford 4.6l go through this same process

@dj4monie 4 года назад

Been done, do it yourself the knowledge is out there.

@big6red389 4 года назад

@@dj4monie wish i could aint got no money to do that they do😂😂😂😂

@brysonshires9742 4 года назад

Oh yes let me see a dohc aluminum block build. Hell I'd even love a 2v

@dj4monie 4 года назад

@@big6red389 Donate Plasma. You can make $400+ a month. Save all your money and you can easily build a turbo system for $1200-$1500.

@jolness1 2 года назад

I wish they would put the original air date in the description. Damn does pat look young.

@k.j.hopkins7111 4 года назад

I thought the wider lobe separation for less over lap was to reduce the possibility of back flow to the intake.

@jasonhooey5677 Год назад

Don't think about it like that. Whatever power you engine makes NA, adding boost just makes more power to that combo. 300hp NA engine makes about 600hp at 15psi with proper tuning.

@dwizzleusa4202 4 года назад

For everyone saying it only made 800hp.. but if you listen he said they were doing a safe tune then they were going for 1000hp when motor was in the car. He said today we getting a safe tune then going for the big number

@AMDFX8150 4 года назад

Are those pistons 2618 or 4032 aluminum? Building a very similar motor for my truck and am now at piston selection

@terrybaptist795 4 года назад

I would have loved to see them push this engine to a 1000 horsepower.

@pj5856 3 года назад

Good ol Pennsoil, promoting the idea that you can make synthetic oil from conventional oil.

@jeromypitman9433 3 года назад

I remember 10 years ago we could build engines with our extra cash. Now we can't even afford to borrow it to build one . 10 more years of this and we will all be lucky to afford gas to put in it