AutoNova Alternator Replacement | 80 Series Landcruiser

Подписаться 1,2 тыс.

Просмотров 1,7 тыс.

50% 1

If you're considering buying an AutoNova alternator, make sure you watch this first.
The alternator in the 80 series has died, so instead of going camping I'm fixing the alternator. I settled on the AutoNova 120 amp alternator from Online Auto Parts which should've been a straight swap over. It didn't turn out that way and I ended up spending a whole day fighting the install and ended up having to make a modification to the alternator to make it fit.
Join us as we venture offroad, chasing landscapes painted with rich sunset colours and some beautiful swimming holes.
Get out there and travel Australia, it's amazing.
Also a big thanks to my wife Racheal (AKA - WE SHOOT STUFF PHOTOGRAPHIC SERVICES) and Amelie for there awesome photography. Check out her facebook page or website www.weshootstuff.com.au
Enjoy!
Thanks for watching. Don't forget to like & subscribe.
Leave a comment below if you have any questions or want to share your adventures.

Опубликовано:

31 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@stevenrobinson9095

Hi free thinkers, the bottom alternator mount has a sliding bush allow clamping pressure. You filed end of sliding bush to fit. Sometimes sliding bush tight. The alternator 80 amp mounts 160mm post 6mm for cable, the 110 amp alternator 8mm post drill out as you did, mounts 165mm when the bottom bolt fitted the top adjuster to slide maybe half bolt hole out in slide, you loosened the top mount on engine to fit belt adjuster. Your post was only post describing problems changing alternator from 80 amp to 110 amp, maybe remove air filter 3 bolts & two hose clamps gives extra room. Also fit vee belts rather than notched belt, less noise & more surface area. Great view.

@mimisides

You don’t need to file the alternator to make it fit the bottom mount. There is a bush in the bracket that you can slide out to give you the extra 0.7mm that you need. To do it I pushed a smaller bolt through the bolt hole then affixed two nuts. I then adjusted them so each one was at either end of the gap in the bracket, and then just tightened the one that was pressing against the bush so it pushed it back into the bracket. Removed the nuts and bolt and the alternator slotted right in. But boy I had some problems with the top bolt.

@jameswembridge7395

Baz I totaly agree with you, as more and more online shopping is becoming the only way to get parts, they say they fit, but no. The job might not be easy and you need to be creative, but not to have to remachine the ordered part. I hope your reviues are seen and direct byers to shop in the right places. Thankyou for your direct honest aproch, sad about the cancled hoiladay.