B🌎sch Dishwasher Water Not Getting Hot-(FIXED)

Scott The Fix-It Guy - Appliance Repair Videos

Подписаться 59 тыс.

Просмотров 39 тыс.

50% 1

QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-RU-vid Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@scottthefixitgu
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/scottthefixitguy
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/scottthefixitguy .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.

Хобби

Опубликовано:

25 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@fxsrider 9 месяцев назад

Having a camera built in to our phones is the best thing ever when you are going to take something apart. Just snap a few photos and you have an instant roadmap for wiring etc.

@ScottTheFixItGuyChannel 9 месяцев назад

You speak the TRUTH😊👍

@MWRLI Год назад

Thanks so much for this! You just saved me $1200 on buying a brand new dishwasher. Symptoms were to the T, long wash cycles, and no drying anymore. Thought it was worth a shot even being a novice at soldering... took less than 25 minutes from start to finish and everything is working great. When I opened the control box I was so relieved to see the solder missing, I knew you took me to the goal line. Thanks for posting!

@ScottTheFixItGuyChannel Год назад

Great job👍

@MarkGido 6 месяцев назад

EXCELLENT! I Found the exact same problem -- bad joint. It looked like the lead to the relay was too short and didn't pass through the PCB far enough but with a piece of wire, good solder paste and good solder, got it fixed! Thanx!

@ScottTheFixItGuyChannel 6 месяцев назад

Thanks for sharing😊

@houseofcakes Год назад

THIS TOTALLY WORKED! Thank you so much for pointing this out!! We have a different model (and it's 12 years old but works great). Took it apart in the same way and lo and behold the same circuit was burned out (same little black burn mark). Soldered it back and PRESTO...steam and no more mold and wet gross. We cook a LOT and doinf dishes by hand was...not fun. Amazing what a simple issue this was that broke the whole thing. 10 stars! Xoxo

@katherinelaw3592 3 года назад

OMG Thank you, you’ve just saved our Christmas and having to spend £400 on a new dishwasher. You are amazing 😉👍

@ScottTheFixItGuyChannel 3 года назад

Merry Christmas😊❤️👍

@exjay252 3 года назад

You have saved me a lot of money. After replacing the heater unit and finding that didn't fix the issue, I watched your video and saw the bad joint on my circuit board. a bit of solder and all works well. Thank you very much for your excellent video.

@ScottTheFixItGuyChannel 3 года назад

Nice job😊😊😊

@ivahardy4885 2 года назад

Done this today with the one left in when I bought the house, now it’s steaming! Thanks Scott 🍻

@ScottTheFixItGuyChannel 2 года назад

Nice job Iva😊😊😊

@Sandivar 3 года назад

You ROCK! Thank you so much! This totally fixed my problem. My controller board opened a little differently than yours, but your help was invaluable. Have a great 2021! Subbed!

@ScottTheFixItGuyChannel 3 года назад

Awesome, thanks so much😊😊😊

@burtbicksler1676 3 года назад

Our SHE3ARF2UC/21 dishwasher stopped heating for the drying cycle, and showed E:02 error. It did finish cleaning but of course dishes didn't get dry like they used to In my case it was NOT the common problem with the relay overheating and causing a bad solder joint on the PCB. I suspect that the controller in our model is using an improved relay for the heater, there was no sign of any overheating and the solder connections were fine. I had ordered a 6V and a 12V relay just in case, and it was a good thing. Our controller board uses 12V relays. The problem in this case was the coil on the relay had opened, so of course the relay would not energize. If you have an ohmmeter you can check this on your board. For the 12V relay the coil resistance should be about 400 ohms. The common pin on the old relay was stubborn but I was finally able to get it de-soldered and the new relay installed. Works like new again. So if you don't see the over heated solder connection check your relay coil for proper continuity. BTW the relay on this controller board had an extra normally open pin, so you have to de-solder that as well. And while you can get away with resoldering the pin on your old relay (if the coil is OK) it is better to replace the relay as the root cause is that the relay contacts have pitted and developed a high resistance connection. So there is a good chance the problem will return in the future if you don't replace the relay.

@ptz0n 2 года назад

Thank you for sharing. Having a service technician stopping by soon and will definately have a look at the board.

@ScottTheFixItGuyChannel 2 года назад

Thanks Eric👍

@jasonrusoff7511 Год назад

This worked for me as well. We have a 14 year old Bosch dishwasher that suddently stopped cleaning well. And the dishes came out cold and wet. I took apart the door and found the pin on the PC board that was now missing solder. I soldered it and the washer is back in action. If it fails again I'll replace the relay with a higher amperage relay. But so far so good.

@ScottTheFixItGuyChannel Год назад

Great idea, Thanks Jason 👍😊

@MrPaddlepower 6 лет назад

Thank you for your videos Their saving me lots of cash ))) Cheers

@scottflint7297 Год назад

Awesome, Thank you😊

@dalecrx 3 года назад

Same problem on a bosch serie 2 slimline dishwasher, water not hesting up. Bought new on 2015. Do you think it is happening on ones around this year? Thanks for the video, great info.

@bdneoh 3 года назад

Hi Scot. Love your videos. You do a great job of explaining things. I have what appears to be the exact same model as in this vid with the same problem as described below: hangs on 1 and does not get steam. I had this same issue 4 years ago and ended up replacing the board. Tonight I pulled the board apart and looked and looked and could not find any sign of a problem. So I’m wondering if the heating element is, in fact, faulty. How do I test it?

@ScottTheFixItGuyChannel 3 года назад

Thanks Ben, How high does the water get when it fills?

@tombrickhouse-growthmatrix6201 3 года назад

Thanks for the video. I got to the circuit board on my SHE33M06UC/50 but found no burnt solders just 2 post that look like they never were soldered. Is it possible that some post are not meant to be soldered?

@kev-n Год назад

Thanks Scott. Great tip! Question - How do we troubleshoot if it's the heater relay vs. the heater unit vs. the thermistor?

@ScottTheFixItGuyChannel Год назад

Can you send your model number to my email: Scottthefixitguy@yahoo.com

@jz2188 5 лет назад

Thank you for this Scott, our trusty Bosch Exxcel Max (2002 model) just started running for ages with 1m left on display and no heat, engineer came out today, claimed no fixes available and wanted a new machine sale, as in this is dead, buy a new one.... But told him no deal (no charge from Bosch as they said they had no modules in stock to sell me so could not repair it - I checked online and these controllers are marked as out of stock, saving me £135 at least).... Found your video here, will be stripping machine down in the morning and getting the relay soldering redone. Saved me £379 on a new machine (fingers crossed!) Cheers !

@jz2188 5 лет назад

Tried the soldering , did not work. shook the board, the relay is rattling so dead. New relay ordered for 88p from Farnell (£5.95 with shipping and handling) , will swap out relay once it arrives and report.

@ScottTheFixItGuyChannel 5 лет назад

Great job, I hope it keeps working👍

@ScottTheFixItGuyChannel 5 лет назад

Nice work😊

@jz2188 5 лет назад

@@ScottTheFixItGuyChannel Relay arrived today, so will fit tomorrow and see !

@jz2188 5 лет назад

Relay fitted, back to a fully working hot water counting down to zero dishwasher, sorted !! Excellent !!

@BharathVaidyanathanX 11 месяцев назад

We faced a similar symptom - no heat/steam at times and at other times, water remained not fully drained. Luckily in our case, we did not have to open the console. The problem turned out to be overdrawing of power from the supply. Electric kettle, toaster and microwave - they all share the power line with our dishwasher. When we made sure that other appliances remained off for the entire duration of a wash cycle - things got back to normal.

@ScottTheFixItGuyChannel 11 месяцев назад

That’s good, Just a power supply problem 👍

@karolkupec2044 2 года назад

Thank you you are grate

@villyskov Год назад

Thanks so much for this!

@ScottTheFixItGuyChannel Год назад

Awesome, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ru-vid.com/show-UC7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it.

@bulentsengun2620 2 года назад

Thank for nice video. Does this cause to tap sign on?

@CyReX1986 11 месяцев назад

Thank you so much! Wokred perfectly for me aswell. All tho i have a small bench dishwasher from bosh. Found the mainboard with some digging ( My mainboard was under the machine, not in front with the controller buttons) and saw that the soddering had alittle burnmarks around it but the soldering looked in tact. But i did what you did and cleaned up the burn marks on two diffrent places on the mainboard (the one i mentioned and the other was right next to it where there was many very small holes with soldering in it and no metall sticking thru like the first one. i didnt resolder theese since my soldering iron had a pritty thick edge) and scraped one of the burnt connectors (looked like main connector for electricity output to the components in the machine, all tho it odesnt connect to the connector... 6 metall connectors and cable only connects to 4 of them) so it was shiny again (was blue and brown burn marks) and put it together again. now it works perfectly :)

@ScottTheFixItGuyChannel 11 месяцев назад

Thank you, I’m so glad it worked 👍

@CyReX1986 11 месяцев назад

@@ScottTheFixItGuyChannel Update: It stopped working again after 1 day :/ Im gonna try again, maybe i didnt warm the solder enough. Its very strange, it washes just fine but the second it starts the drying program it goes straight to the "Check water supply" light and just stays there. The machine kinda crashes there and doesnt respont to enything else then a turn off and on again. Reset does not work... When i turn it back on again and start a new cycle it drains the water thats in there first then starts the program. Tested all programs now and it doesnt work (before it only worked on program with 40 degrees celcius). Do you think that my problem apply's to your solution? im thinking that maybe its one off the inductors or something is faulty. ill try resoldering properly this time see if it helps.

@CyReX1986 11 месяцев назад

Ah darn. it did not work. i made sure to scrape down to the metall and add solder over it but nah its still doing the jump from wash cycle straight to check water supply light... ive checked both the water in and water out and they are pritty much brand new and are not beeing cut off or anything like that. Water do get into the machine and the machine/water does get hot.

@ScottTheFixItGuyChannel 11 месяцев назад

Gotcha, How high do you think the water gets when it fills ?

@CyReX1986 11 месяцев назад

Ok so it just crashed again. i was watching it abit closely now and what happens is after the second water drainage and it has filled the machine with new water for the thrid time it then goes straight to "check water supply". The water is almost to the top of the plastic ring as it should be. i tried to just add some ekstra water in it just to see what happened but nothing happened... i also removed the plastic thingie that protects the drainage motor and the drainage motor spins just fine, no foreign objects down there. Im gonna give it a try by moving the machine to a more leved area and try again.

@thebuehlers4268 5 лет назад

Thanks a bunch for the videos. I have a Bosch 800 series dishwasher. The tablets are no longer dissolving. There appears to be plenty of water, so I don't think it's a water inlet valve problem. I ran a cycle (selected normal cycle and sanitize). After 10 minutes the water was high enough, but cold. No steam at all. After 40 minutes, steam was rolling out, water was very hot. But, the tablet was still mostly undissolved. Any ideas? Do you think it could be the relay?

@ScottTheFixItGuyChannel 5 лет назад

Wow, If you got steam it should be hot enough. Can you try cascade complete liquid detergent and right back on how that works?

@MattTillett 3 года назад

Hi Scott. Do you happen to know where the circuit board can be found on an integrated Bosch dishwasher, as it’s a different set up when you open it up? Thanks, Matt

@ScottTheFixItGuyChannel 3 года назад

Hey Matt, I think it’s down on the lower rear right aspect of the dishwasher near the back.

@scottgibson807 2 года назад

Scott quick question for you - my Bosch has the same problem. Low water and no heat. I’m curious though would the full valve (assuming poor flow) just not stay on until the float valve is satisfied?

@ScottTheFixItGuyChannel 2 года назад

Thanks Scott, I think the problem is time duration. It only opens the valve for a set amount of time. That’s why a week valve gives you low water level and not enough pressure to activate the water heater.

@scottgibson807 2 года назад

@@ScottTheFixItGuyChannel Thanks Scott. Got the part - going to find out today! Thanks for the video.

@burlingtondigs 5 лет назад

We have a 2006 Bosch that has started to have the problem of not heating the water - symptoms, 1) it runs for ever, 2) there appears too be enough water in the unit based on a let fill for 5 minutes and then open door to see how high water is, 3) water is cool to touch and there is no steam, 4) unit times down to 1 - starts at 108 - - - minutes I assume and just does not finish. Before I order a heating assembly - which looks to be a nasty think to install - I will give this a try first. Fingers crossed as up to now this has been a really good dishwasher. If anyone reads this and has any other ideas I might want to try please feel free to comment . . . and thanks Scott!!

@ScottTheFixItGuyChannel 5 лет назад

Hi Michael, There’s a 95% chance that the problem is the heater relay has become unsoldered in the control that lives in the upper right-hand corner of the door.

@burlingtondigs 5 лет назад

My circuit board and assembly are a little different than yours but interesting on mine I found what is a burned and shorted area. I would post the picture but I don't think I can. Time to scribe as you mention and to solder.

@s.c.1972 11 месяцев назад

I have a Bosch 800 series washer. It did not appear to be heating the water at all, but would run. I ran it a few times today and it is getting “warm” but not nearly as hot as it usually is. I get an error code 09 at the end of each cycle. I have seen this video and your video on how to change the heat pump… you think it’s more likely one or the other?

@ScottTheFixItGuyChannel 11 месяцев назад

E09 means the heat pump. Not very hard to do😊

@timfoster7093 3 года назад

Hi Scott great video, I have a bosche series 2, 4 years old would this have a similar fault with heating the water

@ScottTheFixItGuyChannel 3 года назад

Hi Tim, I think your model might have an E 09 error which means the heater/circulation pump is defective and needs to be replaced. It’s not very difficult to replace the heater/circulation pump.

@timfoster7093 3 года назад

Thanks scott

@JP.708 2 года назад

@@ScottTheFixItGuyChannel so my 2 1/2 year old series 2 SMS25AB00G has the E 09 error code. Would you say it's more than likely the heat pump? If so, is there anything I can do to stop this failing in the future? Surely something like that shouldn't be failing within that amount of time? Great videos by the way! 👍

@SupportWeThePeopleKB 4 года назад

Hello, Scot! We have a Bosch SHX57C05UC / 36 that we bought 14 years ago. Until recently it has been terrific. Now, like Michael Phillips who wrote you a year ago, our dishwasher 1) runs forever, 2) has enough water, 3) doesn't heat the water beyond what comes from the house hot water supply; 4) no steam produced; 5) times down to 1 minute and then continues for hours; 5) eventually, it goes to the rinse cycle, continuing down to 1 minute where it stays for a long time until it finally gives up and empties properly; 6) No accumulated heating dries the dishes, so they are seriously wet. The main difference is that our control panel is located at the top of the door. Question: Is there a different procedure for opening the panel for this model? We can't quite see the actual soldering location in your otherwise really descriptive video. Thank you so much for your help.

@ScottTheFixItGuyChannel 4 года назад

This is the best deal I could find: www.applianceparts4all.com/bosch-control-unit-00446048? Try looking carefully on the back of your current controller board. You may see the bad solder joint and be able to correct it.

@SupportWeThePeopleKB 4 года назад

@@ScottTheFixItGuyChannel Thank you so much for your help, Scot. Be well.

@keithyoung7 3 года назад

I had to do the same - and will have to repeat the process in the future because this is a design fault - so have Bosch come up with a permanent fix?

@ScottTheFixItGuyChannel 3 года назад

I don’t think they have.

@josephfolsom2030 Год назад

And what caused that kind of heat to make the solder melt away. The relay is underrated and either the relay with a greater value should be installed or a new board is in order.

@ScottTheFixItGuyChannel Год назад

When the element gets weak it takes longer to hit the right temps and the relay overheats 👍

@yshraybman Год назад

If the relay connection melts would that mean current is too high? So you can connect it again but that would be a temp solution until it melts again.

@ScottTheFixItGuyChannel Год назад

It’s best to replace the old relay to👍

@alexanderszabo5983 Год назад

It's not the first time I re-soldered connections in my Bosch dishwasher. Does it get this hot because of the heat inside the dishwasher or did the Bosch engineers not calculate the current flow correctly and there is too much current with high resistance that makes the solder melt? If it melts because of the heat in the dishwasher, can you insulate the board somehow to protect it?

@ScottTheFixItGuyChannel Год назад

I think as the heating element wears out it puts more load on the heater relay.

@alexanderszabo5983 Год назад

@@ScottTheFixItGuyChannel by the way, I just resoldered this connection for like the fourth or fifth time.

@markvogel9791 2 года назад

I replaced my control board but still my water doesn't heat. I then put the old board back in and after having it powered off for a week I turned it back on and it started to work. Only 1 of 5 washes doesn't heat the water. Any idea what might be the issue? I don't feel that it is fixed!

@ScottTheFixItGuyChannel 2 года назад

Maybe it’s not always filling with enough water. If it doesn’t fill enough there isn’t enough water pressure to activate the heater.

@markvogel9791 Год назад

@@ScottTheFixItGuyChannel You solved it! I replaced the water inlet valve and you can audibly hear a difference and every cycle has gone to completion. Thank you!

@Rturrito 3 года назад

well hope this is my issue, if not gotta cough up some dough

@ScottTheFixItGuyChannel 3 года назад

Hope it works👍

@mikeonfreeserve2926 3 года назад

Hi Scott if it's a 'common problem' they're not good dishwashers 😨 Great video. Take care

@klaasvanmanen8214 Год назад

I hope you realise that a lot of the actions you want to show are outside of the frame, so for example we just missed how you separated the console from the housing. That's a pitty.

@ScottTheFixItGuyChannel Год назад

I’m happy to answer any questions for what you can’t see. Scottthefixitguy@yahoo.com

@klaasvanmanen8214 Год назад

@@ScottTheFixItGuyChannel I found a second video by you on the same topic, just a slightly different type of machine, where we could see how the console was separated. But in general, it would be great to check whether the things you want to show while you are talking about them, are in fact visible in the video. I guess you were wearing a king of Go-pro like camera on your head, which should then point a bit lower, to coincide with the point where you eyes are upon.