In my opinion, it handles well and has a noticeable difference over stock. I had camber arms but they made too much noise so I haven’t run them in a while. When investigating the camber noise, I had also taken off the spacers and springs. When I did, I immediately noticed a difference in handling and ride height and wanted my springs back. So now I run the springs and spacers without the arms and I prefer it. I usually retorque my spacers any chance I remember to but haven’t really had any issues or reasons to. Hope this helps!
In this video they are 245/40 in front 265/40 in rear but I want to go back to 225/50 in front and 255/45 in rear cuz it fills out the fitment gap more in my opinion
@@julanda21 I’m sorry, I’m not sure what you’re asking. The oem spring sizes are about 12.25 uncompressed and the oem tire sizes are f 225/50 and r 245/45. However, neither of these specs are on the vehicle in this video due to modifications. Hope this helps!
I went from the stock 18 base rims to GTR 20inch and now the handling is a bit odd. It keeps pulling left or right. I put a 1 inch spacer witch fixed it but then it was rubbing if I hit a bump. Any ideas what spacer size I should use.
I can make an ‘educated’ guess! But I’d need more info, like the width size and offset. However, in my experience I haven’t seen or heard spacers being used to ‘fix’ handling that is pulling left or right. Either way, can you confirm the sizes you’re referring to are 20x9.5 & 20x11? As well, do you know the offset?