Best Starting Mods 03/04 Terminator Cobra 

Great video for new cobra owners!

Absolutely gorgeous car! I had a 96 cobra back in the day. 03-04 is my dream car. Hopefully I’ll have one after I finish flight school. You’ve got the best looking cobra I’ve ever seen! Nice job.

I bought my '03 convertible brand new from the factory to go with my '99 Cobra convertible. My only mods have been an MGW shifter, Maximum Motorsports IRS urethane bushings, 3.73 rear gears and a Centerforce clutch. I never thought that the clutch was too stiff to begin with, but I replaced mine at 80,000 miles while it still had some life left. I took off the silencer and put in a K&N filter and that has been it. I take it out east a couple of times a year and I like the stock exhaust because it is fairly quiet on the turnpike. It still runs great after all these years with no problems.

Rode in my buddy’s cobra after it was built back in like 09, was pushing over 700hp when he was done, and he still had stock brakes, scariest ride I ever went on. Lot of people forget brakes as a upgrade and they are one of the most important things you can do once you start increasing hp.

Very nice! Still my favorite 03 / 04 Cobra on youtube. The 04 Interior with the torch red is just perfect. Jaeger wrenching's comp orange is a close second though.

Can’t get enough of your cobra videos mayne 🔥 beautiful car

Your video was awesome man. Informative and just great. I have an 04 slightly modded and need to know what to do next this helped a lot! Thank you

Great video perfect mods and details on why you did them. Gives me some ideas for my Mach 1

As usual, great video!

Great video. I also have a 2003 Cobra and I’m the first owner. I’m running flowmaster one chambers, high flow basssni x pipe, Steeda cold air, Steeda short throw shifter, Eibach springs.

These things still hold its resale value pretty well average cost of $20k for the 2003 and up.

Excellent video thanks!!

Thanks for the informative video! Not a cobra owner yet but crossing my fingers i will be one within a month or so!

Great video thank you!

Thumbs up over here 👍🏽

Thank you for the video Just picked up a 2004 Cobra 🐍!! This is very helpful

Awesome Video great mods.👍💪

Mid pipe and idlers pullies are needed as well

Beautyful cobra 👌

Just picked up a 2004 screaming yellow this week w/ 18k miles. It's stock except a cat back, MAF, tb, and 2.81 pulley. Definitely doing the FTBR bushings as soon as I can.

love Your video's

I'd sell my soul just to sit in that car. 10/10

I did brushed metal, cool part is when someone is behind you the word cobra projects to the ground.

Great video....just snagged a 2003!!!

Very nice mods, I think they bring the car together well

Nice and clean dude

Extreme grippy tires for a quick canyon run

Great video

Beautiful car men

You should've started out by suggesting to replace spark plugs with a colder plug, fuel filter replaced, bigger MAF, and check intercooler pumps function before upgrading the pulley or anything else....

Hey Kyle, very cool video. Funny I have a TJ and a Cobra as well. Can you link to the heavy duty Bilstein shocks you used? Thanks!

Alex Svt watched this

One thing you did forgot is the cooling mod the rear cylinder heads drivers side and passengers side the stock cooling system doesn't get enough coolent 2 them and u slowly start losing compression..had to get my cylinder honed and new rings same thing happened to my father's we both have 03's

I have the same set up but I have a whipple 2.9 and return style fuel system

My dad bought his 03 cobra brand new and he took it to a place called alternative performance and had the blower ported had nitrous put on it and some other stuff I don’t know about right now

1st video I watch need to too subscribe .

On your clutch setup did you install an adjustable pivot stud? If so how much shorter did you make it from oem

cat delete is a must. ang

Wish you put a mods list in the description.

Hey bro can you put a mod list in the description or comments?? New sub by the way!!

Hey Kyle, do you only have the front brakes upgraded? Thanks!

Slick car! How much HP do you expect to push with the smaller pulley, proper tune? Stock Cobra's get just under 400HP, so I assume it's closer to 425 HP with those mods, if not more? Again, slick car! You've clearly taken care of this vehicle. I have seen tons of Mustangs from this era in my area and most are in poor condition.

Would you recommend an idler for a 2.8 pulley? If so a 90 mm or 100 mm?

Did you grind down your IRS bolt when you upgraded to 18" wheels?

If I upgrade the pully will the engine be a risk since it’s making more boost? Will I need engine mods before upping the boost

I have a 03 cobra and if im not mistaken I noticed you have the 18in saleen rims on yours. Will the stock SVT center cap fit the saleen rims? If not how did you get the SVT center caps to fit yours. Thanks!

there’s a coupe dsg cobra for 16,500 if anyone’s in the vegas area and wants a cobra

I have those same wheels in chrome, did you have to get yours powder coat or did they came like that

Where'd you get your blacked out badges?

Where u get auxiliary idler

How much boost are you seeing with the 2.76?

With the 2.76 supercharger pulley what size idler pulley did you go with? 100mm?

Step 1 I got to get a Cobra

What size is the original pulley, not sure if mine was changed.

How hard to do cooling mode

I have the chrome metal inserts but had the black sticker inserts first..... don't get the metal they'll look funny lol

What carbon fiber cold air intake is that?

Bro what about an 01 cobra you think you can do a vid about that or na

Hey Kyle. I’m 16 and in the market for a used car. I’m fixed on a Manual Mustang. And I found a Terminator Cobra. You think I should go for it??

How much have you spent on mods?

KyleSVT does this car ride smoother than a 2000 mustang gt

Ever do the cooling mod?

can you send me a link to all the mods you did to the irs to stop the wheel hopping please

Tire>wheel

Could you post a mod list with links?

Heat exchanger with fans

Subframe connectors is 1st mod especially in a vert I cant belive ford let the verts leave the factory with the amount of power and the shitty chassis ! The bolt on factory subframe connectors are absolute shit ! Just had stifflers full length connectors installed huge difference now ! Great engine but shitty chassis im coming from an 08 vette z51 package so its a bit disappointing in the cobra next mod is front and rear strut braces .

First mod for a stock high mileage cobra? 140k

What's your HP