[Betaflight Basics] Setting Up Your Motors & ESCs in Betaflight and BLHeli Suite

Подписаться 2,3 тыс.

Просмотров 19 тыс.

50% 1

Replaced your motors & ESC or building a quad for the first time? Make sure you go through these steps to make sure your propellers spin in the right direction and your quad performs its best. And if you have a problem with your quad spinning out of control, you can follow this for troubleshooting too! 🙂
🎥For a full step-by-step build of a 5" FPV Quad,
check out this video here 👇
• Hyperlite Glide 5" | S...
Need more help with Betaflight?
Check out my Do Everything in Betaflight playlist 👇
• Do Everything In Betaf...
If you'd like to show your appreciation for my efforts, you can buy me coffee here! :) - ko-fi.com/imag... OR
/ imaginationtech
Camera: iPhone SE, GoPro Hero 5
Mic: Comica VM10 (bit.ly/2LyVDvB)
Gimbal: Moza Mini S (bit.ly/2TYrdqw)
FOLLOW ME:
/ imaginationtech
/ imaginationtech
/ imagination.tech
DRONES
==========
Glide
-FPVCycle Glide bit.ly/2Mw2tUN
-FuriousFPV Racepit OSD bit.ly/3bcUOVI
-JHEMCU 40A 4in1 ESC bit.ly/3rXkiMC
-Ummagawd Hypetrain Motors 2306 2150kv bit.ly/3nfxYiH
-TBS Unify Pro 5.8G HV www.getfpv.com...
-TBS Crossfire Nano RX SE www.getfpv.com...
-Runcam Micro Eagle 3 bit.ly/391mYjU
-BN-220 GPS bit.ly/2Xb2a3N
-Gemfan 51466 Props bit.ly/3ni5Prf
Oblivion
-TBS Oblivion frame
-Helio RC Spring AIO
-Drone Drop Boxcutter Motors 2207 2450kv
-Flycolor Raptor BLS 4in1 ESC
-TBS Unify Pro Nano
-TBS Crossfire Nano Rx
-TBS CCD FPV Camera
-OlaFPV VTX Assassin
-Ethix S3 Props
Tinyhawk II Freestyle - bit.ly/2GluBH0 | bit.ly/33d14IH
Mobula 6 - bit.ly/32QVmeV
ArmorWhoopee - • Ultralight Armor 85 HD...
Mavic Air - click.dji.com/A...
Mich (Mini Tricopter) - • Mini Tricopter Maiden ...
-Mini Tricopter Frame - www.rcexplorer.se
-F3 Flight Control Board - www.rcexplorer.se
-RS2205 2300kv motor - bit.ly/2zUdAMV
-FVT LittleBee 30A ESC - bit.ly/2zTJjxK
-Savox SH0263 Tail servo
-6045 Props - bit.ly/2Ae2ci4
MY OTHER GEAR
==========
Taranis Q X7 Transmitter - bit.ly/2CA5KvC
Fatshark Dominator V3 goggles - bit.ly/2PJUHDQ
ToolkitRC M6D Dual Smart Charger - bit.ly/2AttXEV | bit.ly/3go2kMJ
Ultra Power UP-S6 6-port 1S LiHV charger - bit.ly/3cvmu66
TS100 Smart Soldering Iron - bit.ly/35UoPFj
GoPro Hero 5
Insta360 GO - bit.ly/2H5HYvA
=========
Some product links above are affiliate links. If you choose to buy anything through these links, I'll make a small commission at no extra cost to you and it helps me to keep running this channel :) Thanks for your support!
=========

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@techFPV5964 Год назад

Very informative thank you!!!

@ImaginationTech Год назад

You're welcome! I'm glad it was helpful 😊

@techFPV5964 Год назад

@@ImaginationTech As soon as o downloaded the ImpulseRc driver and opened it to my desktop i went back to BF and i was able to upgrade the Firmware to the level i chose and ot worked like a charm. Hopefully when other flyers run into this problem they can do what you suggested. Thanks again for the great results!! ✈️✈️

@dinorizo5385 3 года назад

Thnx a million for making this tutorials bro

@duartepaintinghandymanservices 6 месяцев назад

Can I use only the blheli to tell the motors which direction to turn? My esc doesn't have the proper firmware to work with betaflight and I just replaced one motor and its going the wrong direction

@ImaginationTech 6 месяцев назад

Yes, definitely. It's only in newer BF versions where you can change motor direction, so the steps in this video is how we've always done it.

@duartepaintinghandymanservices 6 месяцев назад

@@ImaginationTech awesome, thank you

@sta.x 2 года назад

Did that, now i can go to the motor tab but they ont spin up. neither in BLHeli nor in BF whats wrong?!

@sta.x 2 года назад

More Information: Stack store.tmotor.com/goods.php?id=946 ESC store.tmotor.com/goods.php?id=821

@ImaginationTech 2 года назад

Just to get the obvious out of the way, did you plug in a battery? Next, it appears that this is a BLHELI 32 ESC, so you would use Blheli Suite (it's the application that DOESN'T look like a purple Betaflight)

@KimMaximus 4 месяца назад

bruh i was like why should i make sure that there are no props on the motor i will hold it down, esay ...Yeah my cat has a new haircut now

@ImaginationTech 4 месяца назад

Ouch! Hope you and your cat are all good aside from the haircut 😂

@glytch5 2 года назад

any idea why in configuration you would NOT have the "mixer" screen that shows motor direction? I cannot figure out why mine won't show

@ImaginationTech 2 года назад

That's definitely weird. Just to get it out of the way, what configurator version do you have and what firmware on your flight controller? That's definitely not normal.

@glytch5 2 года назад

@@ImaginationTech Thank you for answering. No one seems to. The betaflight version is fairly new, got it less than a month ago however I will admit the flight controller version is VERY old.... from 2017 back when these x220s models were newer. I am sort of afraid to flash it. I'm worried like everything else so far it won't work and I will spend a week trying to figure out why lol. I am having a few other odd issues with the wizard and wondering if that is part of the issue.

@ImaginationTech 2 года назад

Flashing would be the first thing I would try though. Next though, depending on your flight controller if it's an F3 (since it's a bit old, i doubt it's an F4), you may not be able to flash the latest firmware anyway, but I think 4.0 or 4.1 MIGHT still be flashable.

@glytch5 2 года назад

@@ImaginationTech it is indeed an f4. When I go to to flash it, it instantly freezes to the point that I have to unplug it!

@kickfliph 2 года назад

Hello there, Great tutorial!!. I'm a newbie and I'm building a Quad with 5" props. I'm using a speedy bee F7 stack, so now I'm facing a problem with the power or the throttle position, in the Betaflight motor menu for testing the motor the line of power instead of sitting at the bottom with the motor completely off they all at 1460 as an armed speed, and if I roll it down, instead of decreasing the speed it goes up, and the opposite way will do the same, looks like the complete off position for the motor is around 1500 sitting in the middle of the bars of each motor. How I can change this to the normal way, where the bottom of the bar the motor is off or in a no spinning position, and if I move the bar up the motor should start spinning faster. If there is anything I can do to fix this please share it with me I really appreciate all your help.

@ImaginationTech 2 года назад

Sounds like you're in 3D mode. Check in Blheli if there is something of that sort, or in Config tab in the motors section if anything is out of place.

@kickfliph 2 года назад

@@ImaginationTech thanks for reaching out back, yes you are right, I did the changes in BF and now is working as expected. Thanks again really appreciate it.

@khalilfaqiri 2 года назад

Hello there, thanks for the infomative video! But I am still having issues finishing up my build. My issue is with my transmitter and the quad. My transmitter seems to be working when I check on betaflight, it is bonded and I see the response from each switch on betalfight, but when I plug in the quad to arm it, it does not work. I do not get any response back from the quad. Can anyone help? Tnx in advance :)

@ImaginationTech 2 года назад

Are your modes set? What error do you see when you look into the goggles and you try arming your quad?

@julitovlogiando 2 года назад

bl heli dosent work on me..

@ImaginationTech 2 года назад

BLHeli Suite or BLHeli S? Installing doesn't work? It doesn't run? Doesn't communicate with your ESC? Doesn't fix the problem? Kinda hard to help as "doesn't work" is too broad. 😀

@julitovlogiando 2 года назад

@@ImaginationTech I know I'm sorry.. No comunication with the ESC.. But I found the right program.. Thank you

@ImaginationTech 2 года назад

@@julitovlogiando that's great! What was the problem and solution?

@Takeover738 2 года назад

I thought the motor poles was 12

@ImaginationTech 2 года назад

That would depend on the motor. This particular video the motor is a 2306, but 2205-2208 usually have 14 poles as well. Smaller motors like an 0802 for example would have 12 poles. Check with your motor and count manually if needed.