BIG BORE AR-15 Magazine Solution

Подписаться 187 тыс.

Просмотров 88 тыс.

50% 1

Best .450 Bushmaster mags I have used and also work in the .50 Beowulf and .458 socom.
This is a viewer funded channel. Support Buffalo's Outdoors on Patreon- / buffalosoutdoors
If you would like to leave a one time tip this is my PayPal address- paypal.me/Buffalosoutdoors
I'm also on Facebook-- / thebuffaloandricochetshow
and Instagram-- / buffalosoutdoors
For bits of my everyday life check out my other RU-vid channel, it's called Down On The Range-- / @downontherange
Thanks to Greg Wilson and his daughter Megan for providing the banjo music. - • Buffalo Chimes
Disclaimer: My videos are for entertainment purposes only, imitation or the use of any instruction shown in this video is done at your own risk. Buffalo's Outdoors/BMCTrip or any other party involved in the making of this video will not be held liable for any injury to yourself (or others) or damage to your firearms resulting from attempting anything shown in this video or any of my videos. I am now accepting friend requests on my personal FB page as well- / jwcfordtruck

Развлечения

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 189

@wildbill6233 5 лет назад

If everyone knew you like I do, they wouldn't doubt your word. I know how much time and effort you put into researching everything you possibly can before you make a video. YOU ARE KILLING IT BUFFALO!!

@buffalosoutdoors 5 лет назад

Thanks my friend! I try to help people. Sometimes it blows up in my face but I am trying!

@wildbill6233 5 лет назад

Just remember: Not everyone can be helped

@Federico-ms5pn 2 месяца назад

I built a 12.7x42 because of you.

@michaelrandell4021 Год назад

Thank for the info. I'm a new 450 bushmaster owner and this video was right on the ticket. Info is power.

@mikehalfmoonmullins404 5 лет назад

Buffalo we/i appreciate all your hard work and input of what does and doesn't work Thank you sir

@buffalosoutdoors 5 лет назад

Thanks! I just try to help people out and save them some time by cutting out a lot of the trial and error that I go through.

@gregfalde7250 Год назад

Thanks for just straight no nonsense information. Appreciate it.

@mossyoakmxrider 4 года назад

Thank you for this video. Just ordered a BCA 10.5” .450 Bushmaster Upper and now I know what mag setup to get! Thanks a lot! And also, if you don’t have a table like the one in the video then I can’t trust you haha.

@carlh7795 4 года назад

I use the 10 round 5.56 Lancer mags. I simply grind the original "hump" off the floor plate, grind out the U shape at the top front, cut 2 coils off the bottom of the spring, and cut down the plastic floor plate stopper and some of the tab that hangs down from under the floor plate. Easily holds 5 rounds. I also use 10 round P Mags. Those take a little more work (heating the feed lips and bending them inward a bit, grinding out the inside rib that runs up and down the front...) and also hold 5 450bm. I also use the 30 round Hexmags. I have to cut two thin wedges out of them to make them more straight instead of curved, and epoxy them back together. Those hold and feed 13 rounds of 450 bm.

@ytubeerr 4 года назад

I use the steel stock 30 round aluminum gi mags with 458 socom fallowers they hold 10 rounds each and work amazingly no feed issues at all

@keithmoore5512 4 года назад

Steel or aluminum? You said both. Thanks.

@krisn8820 2 года назад

I also use a standard 5.56 mag for the 450 bushmaster. Works fine. I only load 5 rounds, but that's all the 450 mags hold.

@leifnilsen6107 3 года назад

👏👏👏👏👏 thank you very much. Very helpful. Doing a little research for my next build.

@chrissewell1608 3 года назад

Buffalo always has, real life solutions for real life problems! good video, as always!

@slimfire54 5 лет назад

Nice video and good info on the magazines.The range is looking good Buffalo.Thanks.

@buffalosoutdoors 5 лет назад

Thank you! I just hope it all isn't under water by Sunday. This rain won't quit.

@Juliang61 5 лет назад

I use a regular 5.56 Magpul with my 50 Beowulf. I had to alter the feed did etc, similar to this. Never had a problem

@davidreed9037 5 лет назад

Thanks Buffalo. Keep the videos coming. Ignore the critics. Keep up the hard work. It is appreciated.

@buffalosoutdoors 5 лет назад

Thank you! I do have critics a plenty! LOL but they be barking up the wrong tree :)

@davidreed9037 5 лет назад

@@buffalosoutdoors its out of jealousy. Its obvious you always put a lot of time and energy testing these products. You see the videos that are paid by sponsors. Lmao. They are fun to watch as well. Cartoons for grown ups I guess. Again, thanks for the great videos man.

@kenhelmers2603 5 лет назад

Smooth and trouble free is good :) Thanks Buffalo!

@buffalosoutdoors 5 лет назад

Welcome!

@scottf.3808 5 лет назад

Nice to know as I did not know they were that finicky with mags....Good stuff....

@buffalosoutdoors 5 лет назад

They can be finicky. Some claim to have never had problems but a lot of folks do.

@1833marine 5 лет назад

Buffalo, you’re the reason I went with the BCA .450 Bushmaster Upper. I have had Feeding issues. Narrowed it down to the Magazines. I did buy one of the Lancer 10 round mags, I just haven’t taken it to the range yet. I hope that solves my feeding issues. Thanks for the videos!

@michaelmignone5869 3 года назад

Did you solve your feeding issues? Most are mag related so hopefully you got it going

@1833marine 3 года назад

@@michaelmignone5869 yes. I eventually got my hands on some Lancer Hybrid Mags. It Runs great now.

@lovelore Год назад

@@1833marine Did you have to replace the follower or did it work as is?

@1833marine Год назад

@@lovelore I Replaced the follower with big bore followers

@ronaldcoleman1323 5 лет назад

Thank you very much. You saved me time and money.

@buffalosoutdoors 5 лет назад

You're welcome!

@gonerydin4225 2 года назад

I really like all of your videos, Buffalo.

@GorillasGuns 4 года назад

Hexmag makes a great mag for those rounds, I can personally speak for it running the 300 blkout with no problems. Thanks , it's nice to have options

@jerrydonquixote5927 Год назад

But the 300 Blackout is nothing like 450 Socom or 50 Beowulf

@GorillasGuns Год назад

@@jerrydonquixote5927 well, they say that the same mag works for those rounds as well, I've only tried with the 300 blk, so I'm not sure how well they'll work with the 450 or 50 beowolf

@jerrydonquixote5927 Год назад

@@GorillasGuns 300 Beowulf is like an AR-10 it's basically like a 308 they still double stack pretty much but a 45 and a 50 caliber are pretty much single stack there's a big difference

@PatRMG 5 лет назад

I'm so jealous of that spread! Speaking of 458 mag dumps, stay tuned! I've got some planned!

@mikehalfmoonmullins404 5 лет назад

You an me both

@buffalosoutdoors 5 лет назад

I'll be glad to watch. Just not one to partake.... unless I had an ammo sponsor!! LOL

@goingsouth2156 5 лет назад

LOLOLOLOLOL Hope you find a Living Dryer.......That would be a Blast! LOLOLOLOL

@aerysroy2513 3 года назад

If you modify the AR 30round by dremmeling the cone in front & sanding down the plastic follower flat .458 will run like a dream & you’re not limited to 7 rounds you’ll have 11 in a pmag or Gov issue steelies

@MultiRusty111 2 года назад

I use DuraMag 7 round mags for my BCA 450 Bushmaster.Plus I installed an H3 5.4 oz buffer tube which made a big difference concerning cycling issues

@Kay_G 2 года назад

Buffer weight* not tube I'm guessing is what you mean

@rusty1850 5 лет назад

Thank You for Your Video.

@Leverguns50 5 лет назад

Thank you 👍

@buffalosoutdoors 5 лет назад

You're welcome!

@smatterchew 4 года назад

Thanks Buffalo! I just got a 30 rnd Lancer (took a chance on a higher capacity), and with the front mod with a dremel, my 458 now feeds!

@Fr3shlySnip3s 4 года назад

Hey Tony, did you switch out the follower as well, or just the Dremel mod?

@xisting4me 4 года назад

Any updates?

@smatterchew 4 года назад

She still feeds. I don't shoot it that often. It's expensive and gives my shoulder quite a workout. I took it down to the LGS to sight it in an there was a bruise on my shoulder for 3 days!🤣🤣🤣

@smatterchew 4 года назад

@@Fr3shlySnip3s The lancer mag came with the front already notched for the 458 socom. The mod I did was on an old GI mag.

@daver2492 3 месяца назад

you just answered my question, thank you!!!!!

@charlesmckinley29 4 года назад

Thank you!

@Stburger1234 14 дней назад

Bear creek is underrated. I got the .45O bushmaster, .50 Beowulf, 300 blackout, and a 7.62x39 all have run almost flawlessly with a minimal of 50 rounds or more through the barrel. Had a few feeding issues with my .450 but put a heavier feeder spring in and modified the mag and works great. That made my Beowulf shoot great brand new out of the box. It’s preferred if you clean the rifle out of the box which I usually do but didn’t with the .50 beo and it still shot great. You have doubts about bear creek budget uppers. At least give them a try if it’s a dud or manufacture fault they back it up with a lifetime warranty. I don’t know about you but I rather put some of my designated money into the ammo and optics.

@user-vn1cy5qq5e 6 месяцев назад

Loved the video...Well done...

@surfmonster2323 5 лет назад

Keep up the great work 👏🇺🇸👏

@buffalosoutdoors 5 лет назад

Thanks!

@happydog4929 9 месяцев назад

Smooth is good, thank you.

@TheMaineiacguy 5 лет назад

Awesome info as always.

@buffalosoutdoors 5 лет назад

Thank you!

@Pipegod81 4 года назад

I have lancer and GI mags for my .458. Used the dremel on the lancers and did a complete feed ramp polish and replaced my bolt with a Tromix. Still having feed issues. The only thing I can think that might help is maybe changing the followers in the mags? Sometimes my bolt will miss a round and others it will pick up a round and won’t close all the way into the chamber like the round below it get caught.

@pyaeger911 3 месяца назад

I have the Tromix bolt in my .458 BCA upper. I’ve found that the 20rd steel GI mags with the big bore followers run the best.

@iowareddneck 4 года назад

Elander steel mags and a calilegal follower works great

@EastTexasOutlaws 2 года назад

Haven't got into big bore yet, but good information !!!!!!!!!

@alandnegrin3770 4 года назад

I love my 2 bear creeks. Worth the money

@hecner 5 лет назад

Thank you for your input. You have great videos.

@buffalosoutdoors 5 лет назад

Thanks!

@emjayw3018 5 лет назад

Great information and video 👍👍🇦🇺..

@buffalosoutdoors 5 лет назад

Thank you.

@zacharysavage7916 2 года назад

Thank. you.🙏🏼

@jims9249 5 лет назад

Great info as all ways. I hope it doesn't rain there like last year,

@buffalosoutdoors 5 лет назад

It's not looking good. If we get much more this weekend the range will be under water ;(

@T.A.B.Videos 5 лет назад

Thanks for the info.

@buffalosoutdoors 5 лет назад

You're welcome!

@adventchild5150 4 года назад

Very helpful thank you

@buffalosoutdoors 4 года назад

Glad to help!

@jacquinwimbish5103 2 года назад

Just got my .450 bushmaster together, (all I run is lancer mags) like buffalo says buy 20rd lancer mags change to heavier follower and shoot safe!!! If you are gonna use 30 rds lancer mags I strongly recommend no more than 9 you'll start to have feeding issues!!

@Tex_I_Can 5 лет назад

Your word is all I need.

@buffalosoutdoors 5 лет назад

Thanks man!

@scrapguy6816 5 лет назад

Great video.

@buffalosoutdoors 5 лет назад

Thank you.

@mcburcke 2 месяца назад

450BM guy here...the critical factor for reliable feeding in these cartridges (esp. 450BM) is to adjust the mag feed lips so that the nose of the top bullet is sitting just ever so slightly "nose up" in the mag, when viewed from the side. The half-moon cutout at the front is usually needed, also.

@mymusicaccount1456 4 года назад

Got all the parts of a 450 ar on order, lots of help on RU-vid for this. I'm a builder so I'm not afraid of using my dremmel, so far I've found i need to clearance the ejection port and magazine, not much else. But my question is I've seen some videos and read a couple articles where people are having cycling issues, possibly short stroking. Do you use any special setup in your buffer? I have standard carbine buffer & spring on order for a 20 inch barrel, i just don't know if i should change the buffer or spring to a heavier setup or is that what's causing people's short stroke issues. Thank you

@YTsux24-7 5 лет назад

Good stuff Buff! You'd have to have mega-bank to do mag dumps with those calibers. Sure is green there with all that rain!

@buffalosoutdoors 5 лет назад

You ain't kidding! Thanks!

@anthonysurrency7134 5 лет назад

Owning a 458 socom is why i picked up casting

@wrxified 4 года назад

I've not had the same success you had with the 20 rd Lancer mag and Tromix follower. The Tromix follower wants to flip forward or backward in the mag and bind when I put and more than 4 or 5 rounds in it.

@truknz71 4 месяца назад

Amend 2 magazines work great. Just grind down the follower flat and the front feed area and they work awesome. Don't bother with the Pmags unless your using very short rounds otherwise the inside front groove will bind on the bullet tip.

@kimbilinkimbilin 4 года назад

I use the Dura mag for my 450 bushmaster 5 Rounds no issues 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🥳🥳🥳🥳🥳🥳🥳🥳🥳

@buffalosoutdoors 4 года назад

I'm hearing that from a lot of folks!

@stag3t-muspsa910 5 лет назад

Once again great stuff...man I love your property....

@buffalosoutdoors 5 лет назад

Thanks man!

@poorfatman5317 3 года назад

Good info

@TheKentuckyPatriot 5 лет назад

Great stuff brother :-)

@buffalosoutdoors 5 лет назад

Thanks!

@xisting4me 4 года назад

With your Dremel job did you just outline the brass or go a little beyond?

@hilltop-ob9bn 5 лет назад

These rifles make me want to see the ceramic tiles come out of retirement.

@buffalosoutdoors 5 лет назад

That would be fun.... but only if you come over and help me clean them up! LOL

@HunterXenios 4 года назад

Why did you make a cutout? Didn’t yours come out with a cutout? Mine did and the one on there website does AND CAN you use these mags without the upgraded stack followers, just stock with the 450

@bigteddybear012001 5 лет назад

I run factory mags in my 450. Got yhem on sell for 17.80 a mag.

@glennmuir5617 Год назад

Please make a video showing the barrel extension and feed ramps for the .458 SOCOM and the .450 Bushmaster BCA uppers.

@trapperjohn2462 Год назад

For my 458 SOCOM, I use 30 round AR 15 mags that I modified with a dremel. Not only did a notch the front, but I also tapered the feed lips. They hold about 10 rounds of 458 SOCOM. Do I recommend this modification ? No....because it is too easy to damage a mag beyond repair.

@basil7416 3 года назад

bigboremag.com sells conversion kits for Gi Mil-spec mags and Polymer Hex mags, They work great too ! and you probably already have the magazines so for under $10.00 you have a big bore mag that works!

@hellishgrin4604 5 лет назад

I think you just need to make it belt fed! ...Or just bring back the harmonica gun!

@donnietirril482 Год назад

Get information thank you

@rickmaples592 5 лет назад

God Love You.......

@buffalosoutdoors 5 лет назад

Thank you.

@railroader8728 3 года назад

Do you use these for your 350 Legend as well?

@KAISER-OUTDOORS 5 лет назад

it’s called Douche-Tube. thanks for another great video though 🇺🇸

@buffalosoutdoors 5 лет назад

It really should be! Thank you for tuning in!

@MrDwrench1 4 года назад

Thanks for the info Buffalo. I am waiting on my 12.7 x 42 upper from BCA. Been watching all the videos about magazines. Yours are straight forward and clear. Where do you get your 12.7 x 42 rounds? Do you reload?

@buffalosoutdoors 4 года назад

I don't reload at this time but I am investing in dies soon. I like the Underwood Ammo 350 grain XTP loads and also their 380 grain hard cast for when I want to punch deep and don't care about expansion. Both loads shoot well in this upper. I get them where ever I find them on sale. I think that last order of ammo came from Midway USA.

@guardianminifarm8005 5 лет назад

Thank you sir. If I have missed this answer, please forgive me negligence. Which one of these would you recommend to a shooter for the first and maybe only big bore AR.? Thanks

@buffalosoutdoors 5 лет назад

For the average guy looking for a big bore AR I'd probably recommend the .450 Bushmaster simply because it has gotten so popular. Ammo is easier to find and priced more reasonably, it also has slightly more effective range than the other 2.

@guardianminifarm8005 5 лет назад

@@buffalosoutdoors .. Thank you sir for taking the time to answer. Our family enjoys your content. Lord bless.

@rodneysrepurposingrecyclin3821 4 года назад

Do they make one for 350 legend I wonder.

@iprodigy6723 4 года назад

I know this video is older but just so you know the new hex mags are now pre fitted for munitions up to 50 beo

@smokeyjoetx4361 4 года назад

Do you have a link to the mag your talking about

@tinomelendez91 3 года назад

Can i use the 350 legend on that mag

@anthonysurrency7134 5 лет назад

The 30rd lancers hold 11rds 458 socom and if i remember correctly, 13rds of 450 bushmaster

@troybyrd1717 4 года назад

I can only put in 7 rounds of 450 Bushmaster inside a 30 round magazine. If I try to put in any more to feel the magazine all the rounds fall towards the bottom of the magazine and I have to fish them out.

@xisting4me 4 года назад

@@troybyrd1717 Tell me more...did you find any solutions?

@troybyrd1717 4 года назад

No I haven't. I think it's a great cartridge but it needs more capacity.

@TheMaineiacguy 5 лет назад

Okay so I just got my Bear Creek Arsenal 450 all together and brought it out today to shoot it. It appears that it is short stroking a large majority of the time. The bolt usually doesn't come back to lock back and often times it won't chamber the next round. Not every time just a lot of the time. I've got a Spike's Tactical T2 buffer which is a 4 oz buffer. I'm wondering what you use for a buffer is it a standard 3 oz? Trying to figure out if going with a lighter buffer will help with this problem. It's totally worth dealing with a tad bit more recoil in exchange for a rifle that reliably Cycles if that is what will fix it. Thanks in advance for any help. Yours just seems to function just great so I thought maybe you could give a pointer or two on what you used for a buffer.

@buffalosoutdoors 5 лет назад

I didn't change anything on my .450 Bushmaster. I am running it on my A2 lower/buffer assembly. It's the 5 ounce rifle length weight. I doubt this helps you but that's what I've got.

@TheMaineiacguy 5 лет назад

@@buffalosoutdoors thanks for the reply my friend. I'll let u know when I figure this out. Definitely fun building my first AR from the ground up starting with stripped lower. I'm learning a lot. Your guidance on the mags was invaluable thanks again.

@TommyTombstone 2 года назад

@@TheMaineiacguy have you sorted this out? A lighter buffer would definitely help with short-stroking.

@TheMaineiacguy 2 года назад

@@TommyTombstone sure did. I just put a lighter standard AR15 buffer in her and never had another hiccup. She's been running strong ever since and I've had probably roughly 400 rounds through it.

@ShrykeGaming 3 года назад

I have question. Im using my 223 lower and I put my 450 bushmaster upper on it and when I put the magazine in it sits up to far to load a round into the gun. I was wondering does that mean I have the wrong magazine for my gun or is it a common thing that happens.

@michaelmignone5869 3 года назад

Did you get this resolved? Does the magazine actually ride higher in the receiver or is it just the 450 rounds are higher? If it's the magazine, possibly a bad run of mags with the latch cutout being too low on the magazine body. If the rounds are whats sitting high, is the magazine for 458 socom? I've read some could have the feed lips a little too far apart to hold the 450 down enough

@chrispiatt3801965 4 года назад

I got lancer mag and a tromix follower and my 20rd wont hold but 5 without bulging out feed lips. Any suggestions

@darksideautosports 3 года назад

I use the 30 round lancers and only load 7 rounds in a mag. Sometimes the first round will pitch up and snag if the bolt is already locked back and I slam a new mag but that has been my only issue. I don’t even mod the followers at all.

@ISXCUMMINS565 5 лет назад

O ya, had a 20 minute ad on the tail end of this video about a buck named, Handy

@buffalosoutdoors 5 лет назад

Wonderful! LOL

@TheCharleseye 5 лет назад

I got the Urban Carry G2 ad. "...footsteps of a Navy Seal." Lol

@garyK.45ACP 5 лет назад

Speaking of RU-vid, my view counter says "1", but I am the 4th comment and third "thumb's up". WTF? Thanks for the tips, Buffalo. FWIW I typically use a Colt 9 round mag for range shooting even with the 5.56. It doesn't bump into the bench. I do own 30 round mags and have no problem with the concept, I am not a "ban big mags" guy, but they are not always the best choice for every shooting/hunting activity. Rifles are a lot of fun to work with. I always have enjoyed them and have considered each one a "project". Keep the vids coming!

@buffalosoutdoors 5 лет назад

ScrewTube is always messing with me. I've had so many complaints about my videos not showing up in peoples feeds even though they clicked the little bell thingy.

@carlclonts8313 9 месяцев назад

We all know what they say! If you want to get killed, buy a lancer! Lol😂

@triggerman1092 5 лет назад

i think i will trust buffalo! 😁

@buffalosoutdoors 5 лет назад

Thanks for the comment!

@Randy_84 Год назад

Why does no one use the pmag? I've had zero issues and zero modifications.

@Mwingreen 4 года назад

Anyone know what a 30 round mag would net you in .50 Beowulf

@DaveSmith-cp5kj 4 года назад

10 rounds

@BoomStickTactical 5 лет назад

Which of those three are the most affordable to shoot?

@buffalosoutdoors 5 лет назад

The 450 and the 50 are priced similar, the .458 socom is ridiculous for factory loaded ammo.

@BoomStickTactical 5 лет назад

@@buffalosoutdoors thanks.

@donhuynh5186 3 года назад

Sorry sir, I think you mention that you can run regular ar15 mag with 450, but does it run reliable?

@Bradt585 3 года назад

The standard AR15, .556 mags are very unreliable from what friends and the internet are telling me.

@michaeldamskey1025 2 года назад

Tromix says the followers are not for use with 50 beowulf. Any thoughts on why?

@oneloveforadventure 2 года назад

I think him shaving down the front of the magazine like he showed makes it useable with 50 beowulf

@tominva4121 3 года назад

What about .500 Auto Max???

@skinnypete5158 2 года назад

Will a 450 magazine AR fit a 45 acp round ?

@TommyTombstone 2 года назад

No. The .45 ACP is a much shorter round than the .450. The phrase "hotdog down a hallway" comes to mind, but we're talking about length, not girth.

@mcscribble16 2 года назад

You from Kentucky?

@GardnerOutdoors 5 лет назад

Hey Buffalo! Standard regular old magpul magazines run like a top in my 450 BM by Bear Creek

@buffalosoutdoors 5 лет назад

There ya go....

@krisn8820 4 года назад

Did you have to grind the inside of the magazine case?

@buckeye8069 4 года назад

What about AA magazine and Polymer80 Magazine AR-15 50 Beowulf 10-Round Polymer Anyone try these?

@jrkustomz5538 4 года назад

Yes ,I have 2 polymer 80 mags I got from midway.....all I will say ,they'll be used for target practice next time. 👍

@roycoleman9299 3 года назад

Whats your opinion on 7.62x39 ar

@pyaeger911 3 месяца назад

I have a really nice 7.62x39 AR. You have to 1) run Duramag mags 2) run a heavier buffer spring and 3) run a H2 or a H3 buffer for it to function properly. I just saved you a ton of time and money.

@scuba3164 5 лет назад

which follower did you suggest?

@buffalosoutdoors 5 лет назад

Tromix

@scuba3164 5 лет назад

@@buffalosoutdoors thank you!

@swenner64 3 года назад

Yup the Lancer is great nothing else works well!!!

@johnbouley4514 5 лет назад

Buffalo, do you know if anyone makes a 243 upper for a AR lower.

@TheCharleseye 5 лет назад

I never thought of that. Now I'm gonna be keeping my eyes out for one!

@hilltop-ob9bn 5 лет назад

243 case is a necked down 308. The case is to long for an AR15. It would work for an AR10 rifle however.

@buffalosoutdoors 5 лет назад

Looks like Anthony beat me to it. They do make .243 uppers but they are for the larger AR-10.

@johnbouley4514 5 лет назад

@@buffalosoutdoors Thanks man..

@johnbouley4514 5 лет назад

@@hilltop-ob9bn Thanks man!

@MrHolster 5 лет назад

What you don't do mag dumps at what I assume is almost 2 bucks a round.

@buffalosoutdoors 5 лет назад

I save those mag dumps for the .22 lr.... LOL I guess I'm just not "cool".

@Dsdcain 5 лет назад

I have *The* important question. Being totally honest, if you had to pick one of those three calibers, which one would you pick and why? Remember it's just a goofy hypothetical but you have to name just one. That said, it's pretty cool that you don't have to pick. I was just wondering. Take it easy man. *:-)*

@buffalosoutdoors 5 лет назад

If I could only have one it would have to be the..... well it honestly hurts to answer that.... IDK I have too look at it like "which 2 would I give up"...lol Look at it like this, I bought the .450 Bushmaster first. I could have bought any of them but I bought the .450. That tells me that I must have wanted it more.

@Dsdcain 5 лет назад

@@buffalosoutdoors Makes sense to me man. *:)*

@buffalosoutdoors 5 лет назад

That was much harder to answer than it should have been... lol

@oishi222 5 лет назад

I love your content but this is such a niche video that I regret watching. Add it onto a video of one (or all) of the calibers.

@buffalosoutdoors 5 лет назад

This was not click bait. The title clearly states what is contained in the video. Yet you watched it anyway only to complain about it. Seriously, just unsubscribe.

@kyleknipfer1581 4 года назад

This was a great video for someone searching fir this specific thing

@kyleknipfer1581 4 года назад

If it was included in another video I may not have found this useful information as quickly. Thanks for taking the time to make a separate video! It helped me out a ton. God bless

@Big6Duke 5 лет назад

Jesus Christ dude your accent....

@buffalosoutdoors 5 лет назад

Jesus doesn't care about accents "dude".

@rugger8787 5 лет назад

Buffalo's Outdoors amazing accent man

@rethinkinc.5385 2 года назад

Now that I’ve waited and waited..AND WAITED. It’s time. Windham weaponry.450. So my question is…,will I be able to use a 20 or 30 rd mag after changing the follower and have no cycle issues ? Everyone seems to say different things and have different opinions. I need this tool !!!