Biggest chinese knife scam ever!! Benchmade Bushcrafter SCAM!!

Подписаться 310 тыс.

Просмотров 51 тыс.

50% 1

Sponsored by DeleteMe! Remove your presence from the internet and get less spam and be more protected. Get 20% off: KNIVES20 via www.joindeleteme.com/KNIVES20
We've seen a lot of knife copies, scams etc. But todays Benchmade Bushcrafter clone is one of the most identical clones we have ever seen. Up to the boys of DBK to help you not to get scammed! We show the little differences of these knives so you don't get scammed when buying one second hand or even new... Of course we also see how it performs and some little destruction....
Get a real Benchmade
USA: shrsl.com/4cqfc (affiliate)
eu: www.lamnia.com/en/search?s=be...
Prometheus_Beard is giving away a DBK bushcrafter and more!
bit.ly/DBKgiveawayPromBeard
Our review on the original Benchmade bushcrafter
• Most Requested Knife, ...
Check out our new strops!
bit.ly/DBKshop
Check out the $50,- knife we designed with BPS!
USA: amzn.to/49xrl4w
Official site: bit.ly/BPSOfficial
Etsy: etsy.me/3FR7EXJ
Join Our monthly giveaway Give-Away! Join the royal knife club to participate. THANKS!
bit.ly/DBK-MonthyGiveAway
Chapters
0:00 introduction
________________________ Shops!________________________
Support us by buying from our shop!
bit.ly/DBKshop
Awesome shop in Europe (affiliate)
bit.ly/Tools4GentsDBK
BladeHQ Knife shop USA: (affiliate)
shrsl.com/20i50
________________________ Check us out!________________________
*Check out our Patreon Give-Away and support the channel: *
bit.ly/DBKPatreon
hidden message: Mikkie is an ugly unwanted child
*Discord!*: / discord
Insta: bit.ly/DBKInstagram
FB: bit.ly/DBKFacebook
____________________________Music:_________________________
#benchmade #bushcraft #Scam

Развлечения

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 226

@DutchBushcraftKnives 6 месяцев назад

Sponsored by DeleteMe! Remove your presence from the internet and get less spam and be more protected. Get 20% off: KNIVES20 via joindeleteme.com/KNIVES20

@aarondavies8486 Месяц назад

Please do one of these but on the becker bk2 fake

@accountcontrol 6 месяцев назад

Benchmade is one of the world's most counterfeited brands. Far more than any other knife maker. There are more than 100 counterfeited models so only buy from an authorized dealer. Even Amazon sells lots of fakes. Thanks DBK for pointing out obvious differences.

@user-oj1mr8ec9t 6 месяцев назад

Even Amazon… well, I sort of expect that. 😮

@stereodreamer23 6 месяцев назад

The reason why. Benchmade is so frequently cloned is because they are not a company--they are a cult. They have mythologized their brand to the point of absurdity, and their quality has fallen tremendously in the last decade. Their prices have skyrocketed to mmatch their own delusions about their quality. and design, and their weird little cult of fanbois gladly pays these absurd prices, disregarding that their new knives are only marginally better than stuff made by Gerber or Mora, and their new designs are ugly and non-ergonomic. I'd rather buy 15 Benchmade clones, and use. them as disposable tools, than put a single penny into perpetuating the delusional Benchmade Cult. Maybe. when they start making beautiful, ergonomic, artisan knives like they did a few decades ago, I'd consider buying. them again...

@DeeDee-go2zt 5 месяцев назад

If the price is stupid then let them play

@gregblake2764 6 месяцев назад

I have a genuine Bushcrafter that I bought from REI several years ago. While I own way too many knives, the Bushcrafter is my favorite backpacking knife.

@Guru_of_ganja 2 месяца назад

I have many as well. Bush crafter And Kalahari bushmen by bark River

@mtnyoda3257 6 месяцев назад

I look forward to these videos more than any other podcast, review channel, etc… it’s a blast, entertaining yet informative. I am an avid knife collector and mountaineer. Love it!

@DutchBushcraftKnives 6 месяцев назад

that means a lot to us man! thank you so much for your kind words!

@prometheus_beard 6 месяцев назад

Awesome Maarten, thanks man! Have a "shexy" Christmas guys! Good luck to anyone entering my draw! 👍 The knife is that good, I'm tempted to enter it myself haha

@DutchBushcraftKnives 6 месяцев назад

hahaha thanks a lot my friend!

@prometheus_beard 6 месяцев назад

@@DutchBushcraftKnives You're welcome mate 👍

@goodinsrt8 2 месяца назад

Benchmade is one company that should be counterfeitied. The narrows and the bushcrafter are horribly over priced.

@jasonK1375 5 дней назад

I have my legit ones and I have a few clones. My Narrows clone is just fine considering the BM is $522! I have 2 legit Bugouts and one knock off. My knock off is very well made and very sharp. I have no issues with them. Is the real thing better? Of course. But when you start charging customers the prices they charge, it makes sense. I even have a few knock offs that are Kershaw. Again there's a difference, but however, side by side, its negligible. The knock off Bush Crafter you are showcasing I have and mine is like a razor. It maintains a good edge and I have zero complaints. The knock offs can be really well done. Out of my 50-60 knives, about 7 are clones.

@DenisHauser 6 месяцев назад

Buying used knives from private sellers is therefore a nogo. I have often seen the odd nice Spyderco privately, but have never bought one because you can never be sure of getting a fake knife. The scammers not only sell bad products, they also destroy a lot of trust in the whole community. 😞

@JCOwens-zq6fd 6 месяцев назад

People tend to be aware of what they are buying when they buy a clone. They buy it b/c they know they will never afford the benchmade. Thats just the reality.

@richardmcginnis5344 5 месяцев назад

that's what you get for buying a 200 dollar knife that does the exact same thing a 30 dollar knife does

@Bellend361 6 месяцев назад

Great show lads,have a great Christmas and a great new year👍👍🤘🤘

@williammills3632 6 месяцев назад

Best channel on the Tube. Merry Christmas 🎄 blade brothers...

@AronOutdoors 6 месяцев назад

The sellers of scam knives need to face legal issues.

@phillipadams4738 6 месяцев назад

Off topic. I just received my BPS Bushmate. Love it. Compared to my favorite bushcraft knife its a very close second and way cheaper. It naturally fits and indexes in my hand. After a weekend in the woods, i cut the securing strap off the sheath in about 2 hours. Lol. I’ll make something else. But not once did i find the knife coming loose. I wore it dangled from my belt. Cutting wood, starting fires, cutting my steak. It did amazing. I really really love this knife. I also love that it says designed by yall right on the side of the knife. Great job. Thank you.

@TheTommyw77 6 месяцев назад

Merry Christmas Bushcraft Boys!

@DutchBushcraftKnives 6 месяцев назад

merry christmas legend!

@ToolsandTime 6 месяцев назад

Thanks for showing us the difference, be careful with your money!

@dougrussell1926 6 месяцев назад

Don't buy Benchmade, until they stop overpricing their knives. Problem solved.

@evanlughfahy9778 6 месяцев назад

Love your channel! Just want to mention, the word “replica” has a very specific meaning. It applies to reissues of discontinued products by the original manufacturer. Anything else is a copy, reproduction, or knockoff, etc. Even native English speakers often get this wrong.

@DutchBushcraftKnives 6 месяцев назад

Thanks for the info!

@hanktheknife4352 6 месяцев назад

…and lesson learned - if i‘d buy 2nd hand knife, it has to pass all DBK-Tests 😀😀😀

@jax3695 6 месяцев назад

Honestly it's pretty hard to get scammed with a clone if you buy from reputable dealers, aka the ones officially recognized on the benchmade website. Buying these from 3rd party dealers is just asking to get screwed.

@rickydowning7557 6 месяцев назад

Are you not doing your favourite knife and steel review this year? I really like them videos

@lancechristy2595 6 месяцев назад

Happy holidays gentlemen

@BFree 5 месяцев назад

Great video. Thanks a lot!!

@bobafettuccine3541 6 месяцев назад

Thanks DBK 🇺🇸😊👍

@tubulzr 6 месяцев назад

Other than having a collection of fakes, these knives are useless. And as pointed out, just plain dangerous when used as the real thing. I've never understood the attraction of collecting fake knives. Like staring at a polyester fake Ferrari body, bolted to a dodgy Ford Fiesta. Sure, it might almost look genuine, for some, but what's the point?

@fireantsarestrange 6 месяцев назад

I have an account with Benchmade. I only buy from them. I have 3 of them. You can send the knifes back to Benchmade to have them serviced for free for life. The one thing that failed on me is that the Bushcrafter leather sheath failed me when the knife simply cut through it. I got a Kydex one aftermarket. That knife never leaves my side. It's reliable

@The4cp 6 месяцев назад

I complain about Benchmade (especially folders) being overpriced a lot. I hate seeing them scammed. Someone needs to put China in their place when it comes to copyright laws.

@dfcvda 6 дней назад

copywrite laws do not apply in China.

@scottlanghorst1483 6 месяцев назад

Merry Xmas and a Happy New Year to you and yours, Guys. 🎅 🤶🥂🍾

@olopezzamora83 6 месяцев назад

The opening got me... almost cancelled LOL

@J.B.-in7cx 6 месяцев назад

You guys Rock! Please test the Schrade f9 in 1095.

@Nacreous01 6 месяцев назад

Would love to see you guys try out the Fox Knives FX-140XL, FX103MB and FX143MB designed by Markus Reichart

@ezk9026 6 месяцев назад

Great video guys, you should try the LT Wright Genesis or any of their custom USA made knives. The spine is the sharpest ive seen on a knife to date however I have not seen this bench made in person. Love to see you guys test one out im sure they will send you 1 for free if you send them a link of this great channel. Great guys over their and they all love bush crafting like we do. Thanks again!

@MichaelBrown-di6ks 6 месяцев назад

Nice one boys! You still need to review a ZU Works blade from Australia 👉🏻👌🏻

@LairdDavidson 6 месяцев назад

I knowingly bought a Chinese copy of ones of my Benchmade knives because I wanted to see the difference. To be honest the copy is really quite good. The blade is a bit soft, it's clear the the steel isn't as good as the original, but it's not unusable. I could buy ten of them for the price of the original. I'm not comfortable with the ethics of making a flat out copy rather than making something similar, people could be fooled into paying too much and believing they are getting the real deal, so I'm not endorsing them just pointing out my experience.

@danielmayer9145 6 месяцев назад

How soft? In the lines of 8cr13 or way softer than that?

@rolux4853 6 месяцев назад

I also bought a few Chinese fakes, mostly Zero Tolerance. The quality of the titan and carbon is completely on par with the original, which took me by surprise. The hardware is very much worse, meaning the little screws are to soft and strip easily and the bushings are flimsy. It was labeled D2 and keeps reasonably sharp. I tested it at my companies hardness testing machine. It comes to 60HRC. That also surprised me. I would never buy it to rely on it, it’s just to dangerous with the tolerances Chinese manufacturing is known for.

@LairdDavidson 6 месяцев назад

@@danielmayer9145 I'm not sure what metal is used. I'm guessing it's something similar to 440C and I've no idea if the heat treatment either. It performs well, just needs sharpening quite often.

@JohnB-dr8sk 5 месяцев назад

Every Chinese fake someone buys helps to fund hypersonic missiles which are pointed at US Navy ships.....

@jasonK1375 5 дней назад

@@rolux4853 I have a ZT knock off too. Honestly, I dont even think its a knock off. The action is great, the blade is one of my sharpest and its a REALLY nice knife.

@makuseitse 6 месяцев назад

Thank You!

@stevanoutdoor 6 месяцев назад

There's a difference between a 'clone' where they even use the original brand name and stamp to pretend it's the original trying to fool the clients and a 'copy' where the model is similar but they use their own brand name and also say it's made from different materials and steel. I'm no fan of clones since they are trying to fool the public but basically all knives are copies in some way. The DBK knife is basically a BRK copy, but not a clone. I'm happy that you girls finally admit that making feather sticks is not so much about the steel or grind but about skill like almost all outdoor camping tasks. So suppose you like this model Benchmade (I don't) you now have a choice between the original that is 290 euro here (in The Netherlands) and make of CPM S30V steel or the Chinese made Sibert copy made of (what they say) S30V (same) steel at a price for 31 euro. So you can buy 9.35 Sibert copies for the price of one original Benchmade. So even if the Sibert is not really made of this steel (but maybe 440C) or hardened to a lower RC that's a lot of price difference.

@DutchBushcraftKnives 6 месяцев назад

Yep that’s it. It’s basic copyright law. Don’t steel someone’s stuff.

@stevanoutdoor 6 месяцев назад

@@DutchBushcraftKnives Copyright on a model knife that looks like any other knife is not even possible? To get a copyright it has to be creative and original. I don't know any knife model that has a copyright since every knife model has been done before. You can have a copyright on the brand name and logo. That's why 'clones' where they use the brand name and logo of the 'original' are illegal but a 'copy' of the exact model with their own brand name is not. Someone can just use the model you 'designed', using other people designs, and produce a copy with their own brand name and it's not illegal. And that's the copyright law in most of Europe basically. Probably not in China where there might not even be copyright laws at all. But to break it down to the DBK knife. You use a handle that's a copy of the Bark River handles, a blade shape that's basically found in many other knives including again BRK, a steel that was invented by someone and in this case produced by TRC so there's nothing creative and original about it. It therefor, besides the logo and brand name' has no copyright. In fact you just used (you call it stealing) other ideas and combined them. You did what the Chinese are doing.

@DutchBushcraftKnives 6 месяцев назад

@@stevanoutdoor dont know about copying exact dimensions but definitely logo’s, name and graphics are illegal. But design probably too otherwise there would be a lot of legal fallkniven copies going round which isn’t the case. About the DBK knife: it was all a big scam, even the steel is just from a random file we found rusted in Maarten’s shed. Don’t tell anyone!!

@stevanoutdoor 6 месяцев назад

@@DutchBushcraftKnives The clones that have the Brand name, model name and/or Logo of Fallkniven are illegal to buy and sell here in most parts of Europe. It doesn't mean they are no good but the brand name and logo have copyright. The model (design) and materials used don't. So the copies that use their own brand name are not illegal, not even in Europe. It's the same with watches for instance. If it looks exactly like a Rolex but isn't a Rolex but they still print Rolex on it pretending it is a Rolex is illegal. A copy that looks exactly the same but they use their own brand name is not illegal. It would help of course if you look into the laws before commenting. And in your own 'design' how many 'design' aspects by others you have used? Basically everything and not only the knife but the sheath also. Cover up the logo's and put your knife in between a bunch of Bark River Knives and a person not into knives can't tell the difference. Your knife is a copy of a Bark River Knife. The only reason why it's not illegal is because you stamp your own logo so people can tell it's not a Bark River.

@olivierbatiste6035 6 месяцев назад

Happy new year DBK ! Thanks for your videos :)) Nonetheless, as a regular viewer, I am not really interested in showing/testing chinese copies : bad buzz is buzz anyway ! I'd much prefer to see you guys testing and talking about more unknown local real brands instead of this crap. Blessings from France, ik wens je een gelukkig nieuwjaar !

@bryanmarsh9886 6 месяцев назад

Thanks for this review! I have one of the real Benchmade knives (and that handle is really uncomfortable!). Could you review one of the S390 knives? There are Russian and Swiss makers using this steel.

@alaskaraftconnection-alask3397 6 месяцев назад

Not to imply this happened here.... however, what if the Clone in a different case of circumstances, revealed that some clone manufacturing facility actually made a better knife than the original at half the asking price? Then who or what would we be pointing the finger at? Is it possible in the future, that the cloning process outpaces the original manufacturer with price and quality without having to do any of the design R&D?

@DutchBushcraftKnives 6 месяцев назад

It could be done even with lower labour costs. but it remains stealing. For example this knife was designed by Shane sibbert who probably gets a small part of each benchmade bushcrafter sold. A clone company wouldnt have to do that either. But this is of course where it just gets unfair and illegal. Even though I definitely understand there are people who have less money but want the same quality and it would be hard to say no but i'd see it the same as buying a stolen bicycle for half the price. good deal yes but low honour :P

@alaskaraftconnection-alask3397 6 месяцев назад

Quite a bit of dishonorable practices from companies. From spying on the latest pre-production to cloning reproduction... it is what it is. Interestingly, an architectural patent is pretty meaningless nowadays. Alter Something by a fraction of a millimeter and it's a different product. Add a grain of flour and salt to some formula or recipe... it is what it is. My example above was hypothetical, yet possible for a clone to have comparable specs close enough, with the price competitive enough to be competitive. Sometimes production progression just happens to be a little tapping intel, borrowing and stealing along the way. Duplication scanning and cnc machining has made the cloning process just about impossible to deal with and too costlty to enforce.

@colbunkmust 6 месяцев назад

@@alaskaraftconnection-alask3397 You seem to have a misunderstanding of what patents are for. You've never been legally able to patent a recipe. Recipes for food are can be protected as trade secrets, but they can't be patented. And patents can't be circumvented by changing specific metrics, they protect intellectual concepts. A concept is not determined by measurements of a product. A knife by itself can't be patented because... well... knives have been around for all of human civilization. Only specific new engineering components can be patented, like Benchmade's Axis lock, Kershaw's Speedsafe assist, or Spyderco's Spydiehole.(Technically you could apply for a patent for anything, but if you try to enforce it you will lose in court if any similar product with the same concept existed before you filed the patent).

@mesahmesiah6281 6 месяцев назад

You guys oughta test some of the “swiss made” stuff from walmert sent straight from china

@hezekiahchacha413 5 месяцев назад

Maarten you just made my day in the beginning of the video there 😂😂😂😂

@DutchBushcraftKnives 5 месяцев назад

Haha thank you. You are welxome

@davidneal6920 6 месяцев назад

Thanks for all you do 🇳🇱 🇳🇿

@thomasdeanda2360 6 месяцев назад

Can you guys review the Jeo-Tech number 18 please. I absolutely love using this bushcrafter and it’s somewhat sturdy af.

@cabbydavis 6 месяцев назад

Here’s hoping that different runs changed the placement of the s30v etching

@phantomstrike3310 Месяц назад

I bought a "benchmade" side folder at a PX when i was in Iraq in 2008. I think it was like 50 bucks or so. I used it through 2 combat deployments, then brought it home and continued to use it for everday use. Its 2024 and the blade is still stupid sharp. I just noticed that the blade said China on it. Im not one for knockoffs, but damned if the knife isnt still great after 16 years

@SkunkPunch73 6 месяцев назад

Well you did I again lads top stuff and I had a laugh (it might just be my mind, I ate too much LEGO as a kid) this is definitely a growing problem in our community fake shite knives. Wishing both of you and them loved ones (that put up with you😂) a cracking festive season and a wonderful NewYear. May ch love lads🫵🏻😘👍🏼

@SkunkPunch73 6 месяцев назад

You gotta love auto correct ( May ch love ) Yeah try it this way Much love fecking auto correct my arse

@ryannicklas4227 6 месяцев назад

I would love to see you guys review the Demko Freereign. Specifically in magnacut

@EODReddFox 6 месяцев назад

The reason alot of these clones, not just the bushcrafter, are so good is because the same companies who make the actual production versions in China are produces versions with weaker fit and finish to increase their profit margin. Alot of the time the actual blade/steel are identical

@DutchBushcraftKnives 6 месяцев назад

That isn’t the case with any of the clones we’ve tested! Always utter sh!t steel! Cheers mate

@DL-ij7tf 6 месяцев назад

Yeah do you have an example of a knife this is true for? Even if both knives (real and knockoff) were made in China I doubt they'd be made by the same company or factory. If you find a Kizer that's usually $75 priced at $8 it's going to be made by someone ripping off Kizer, not the night shift Kizer employees on the Kizer machines with the tolerances loosened.

@just9911 6 месяцев назад

But beyond that - your entire line of thinking is absurd.

@deez5396 6 месяцев назад

While that is common for a lot of products knife companies usually prefer to do their work in house unless they’re not able to There’s no Chinese factory for these knives most bench made knives are made in the USA and source materials from the USA Aside from a few cheap models where they state otherwise

@colbunkmust 6 месяцев назад

All blue class BM knives have always been made in the USA. In fact, BM stopped making knives in China almost a decade ago. So in this case it's sort of irrelevant. The same is true with a lot other often copied knives. Example: the Spyderco Pm2 is a knife that has been cloned for years and the actual Spyderco version has never been made in China, even though some other Spyderco knives are made in China.

@promiscuous675 6 месяцев назад

Thank you.

@agent7796 6 месяцев назад

I do have a few Chinese clones, but I know they're clones & are only for my personal collection. It's people who buy clones & sell them off as the real thing that are the real problem IMHO.

@pomegranatepip2482 6 месяцев назад

I’m sorry. You are part of the problem. These people steal other company’s intellectual property for their own profit. There is no excuse to buy counterfeit goods. You are promoting theft. Your attitude is exactly the problem.

@agent7796 6 месяцев назад

@@pomegranatepip2482 your entitled to your narrow opinion, Merry Christmas.

@pomegranatepip2482 6 месяцев назад

@@agent7796 it’s not narrow. If you are buying counterfeit goods you are in essence stealing from the original designer and manufacturer of these goods. There is a reason counterfeiting is illegal, and that’s not an opinion. It’s law in countries that respect people’s commercial rights. You are welcome to explain to me how this is not problematic - I’m all ears…….

@clintwestwood3539 6 месяцев назад

@@pomegranatepip2482you are more obtuse than an obtuse angle bud

@pomegranatepip2482 6 месяцев назад

@@clintwestwood3539 go on then…. Explain to me how buying counterfeit goods is acceptable …. I’m sorry if you find me obtuse; actually, I’m not sorry at all. It f’king irritates me when people buy the output of criminal activity, and then the OP says that the problem is when it is resold as real. So what, it’s ok to steal someone’s intellectual property and sell it, making money without compensating them, but if you steal it and misrepresent it, that’s now a problem? Perhaps if you are someone that makes tangible things for a living this may resonate with you.

@madtownangler 6 месяцев назад

I only buy from a dealer not off the internet. If there was a knife I wanted real bad I would just call the company and find out where to get one weather (sp?) it's through them or the nearest store. I did buy one that I knew was fake just to compare. I ended up giving it to my nephew for his backup after I resharpened it. Was a buck

@fearthehoneybadger 4 месяца назад

Batoning can destroy even a good knife.

@waltersampsell7358 6 месяцев назад

Like to see y’all test the demko free reign and zt 006

@TheJohn93226 6 месяцев назад

Also the butterfly does not look the same at all on the head and the tail.

@darinjenkins7954 6 месяцев назад

Not all fakes are created equal..

@pirminzemp2731 6 месяцев назад

Awesome Video

@mikeloeffler2801 6 месяцев назад

You should’ve used a Mora that would beat both knives I love your channel and merry Christmas to you and your families and Mickey Grow the beard you look more like a outdoorsman keep up the good work I love your channel rock on🎄🎄🎄

@cristianfuentes8202 3 месяца назад

I am against counterfeits, but a clone is just a clone, how many American companies do the same thing? ...forgery is a crime, but a clone is another option

@szalkaisa69 6 месяцев назад

This looks like an OK Knife.😂

@daniel.rosina 6 месяцев назад

Pls review Civivi Conspirator, the best budget folding knife ever!

@mtnyoda3257 6 месяцев назад

Great video.

@1diggers1 6 месяцев назад

Those copycat bastards!! How much was the copy being sold for? I missed that I think. Well happy Thursday and Happy Holidays everybody.

@jasonK1375 5 дней назад

I paid $45 US for mine.

@piotriwaszko2295 6 месяцев назад

I completely agree with your opinion about Chinese fakes! Unfortunately, the Chinese will continue to make fakes as long as people want to buy them. It's sad but true. In my opinion, the buyers are more to blame for this illegal practice than the producers. And this does not only apply to the knife market. Greetings to all and Sharp Christmas! 🔪😀 ….. and wish all of you sharp gifts!,,,🎅🌲🔪

@SwampOperator 6 месяцев назад

The best way to tell is the tubing in the handle. Benchmade dosnt use glue to attatch the scales. They counter sink the holes, and flare the tubing out. This is actually what holds the handle scales on The tubing is square cut on the clone, and glued on

@harryfant1432 6 месяцев назад

@DutchBushcraftKnife you guys should look and test the Za-Pas ultimate outdoor knife

@JamieCrickmore-gs9so 6 месяцев назад

Wood jewel puukko. Great knife for cheap. thanks guys. Merry christmas

@darken8649 6 месяцев назад

Have you guys ever heard if TFK knives? Id kove to see you test one of those

@noyzmunky 6 месяцев назад

Cheers lads

@batterybuilding 3 месяца назад

If you are going to copy a knife, copy the best.

@kedragon6460 6 месяцев назад

Please make a Knife Test Eickhorn KM2000 vs Miltec KM2000.

@ramchesz 5 месяцев назад

Hi gastuh! Happy new hair! Thanx for the video. Just ordered one from aliexpress. I know you guys dont like to promote these kinda clones but be real. Edge retention 4 times worse. But its also 4 times cheaper. I dont throw knives, i dont cut ropes 5 times and then do a paper test! I do what o have to do, and when knives (kitchen, fishing or work) gets dull i sharpen them in one batch. Keeep it coming and thank you for the promotion!

@jasonK1375 5 дней назад

My sentiments exactly.

@michelottix4428 6 месяцев назад

I'd like to see a review of the Joe Vogel "Evolution". The todays version, which is made by Roman Kase in Switzerland (made of Vanax Superclean steel)👍. (€ 800,00)🙄 Vrolijk Kersfeest 🎄🧑‍🎄🎁🔪🤗

@adrienjames 6 месяцев назад

First! Can’t believe it. Great vid as usual fellas. All the best!!

@bulldozer6175 6 месяцев назад

Hi Boys,i would like to see a Review of the Whiteriver Ursus 45.

@felipesepulvedasalinas6648 6 месяцев назад

Tried to test eafengrow knife please

@avim4896 6 месяцев назад

Please bring back Muscle Hammer Guy 💪💪💪

@TheFBNL 6 месяцев назад

What do you guys think about Dulo knives making exact copies of great knives... for example the DBK Bushcrafter.. except for the logo ofcourse

@DutchBushcraftKnives 6 месяцев назад

the bushcrafter Dulo makes is actually our first design. We asked him to make it. I think if for example this is the way to get a fallkniven like knife with wooden handle and the super steel you want it's not that bad as long as its not a big scale production and differs from the original product. These chinese clones are exact copies with false claims to materials and claiming its just an official benchmade. So i dont know. I don't fully stand behind the look alikes from dulo i think but im not against it either.

@TheFBNL 6 месяцев назад

@@DutchBushcraftKnives Your a very balanced man. Thnx for the response! 😁✌️

@kyborg44 24 дня назад

I think I got one of these off ebay, glad I didn't pay full price

@heyarno 5 месяцев назад

Please review a current production Mora companion HD stainless. Mine refuses to take a proper polishing. It looks like the steel has tiny bubbles inside and some carbide bands. The edge got flattened when I slightly bumped into a wooden cutting board while cutting some dried meat. And the factory grind is asymmetrical at the tip. The logo on the blade looks like it's just laser etched, not like on my older normal companion where it's stamped in. Maybe I got a scam clone from ebay. Or mora quality went down like fuck.

@f804.de.ruyter 6 месяцев назад

Lol you thought we'd get a white christmas. Instead we got rain, hail and storm.

@MySk911 6 месяцев назад

Да, где то реплика интересна, и по качеству может приятно удивить, а в этом варианте, просто разочаровывает 😅

@Flow75Theory 6 месяцев назад

Try Reiff knives

@jamesl2950 6 месяцев назад

Please review the Victorinox bushcraft knife

@bobj8611 6 месяцев назад

I fell for the fake Gerber Strong Arm being sold on ebay and they are still being sold even after being notified.

@felipesepulvedasalinas6648 6 месяцев назад

Tried to compare Alaska Harpoon with it's chinese clone

@pirminzemp2731 6 месяцев назад

You Make More Videos About Scam Vs Orginal Knifes Greetings from Pirmin

@hammerofdawn1092 6 месяцев назад

O shit

@RabFFS 6 месяцев назад

Just had a thought boys..... Will there ever be a DBK Movie? Maarten Thor Vs Mikkie Dundee 😱😱😱😱😱😱😱

@supermannyg3 6 месяцев назад

Does anyone know the exact rope they use for the cut test? I'd like to perform that same test with the exact rope so I can compare things to their videos. Thanks.

@DutchBushcraftKnives 6 месяцев назад

I believe its called manilla rope!

@supermannyg3 6 месяцев назад

@@DutchBushcraftKnives thank you so much. Do you recall the thickness of such rope?

@SteAbs 6 месяцев назад

Are you guys getting into the Baton business now as well?! Also.... Merry Christmas guys!! 😎

@DutchBushcraftKnives 6 месяцев назад

merry christmas! Do you mean making batons for in a shop?

@SteAbs 6 месяцев назад

@@DutchBushcraftKnives I mean the fact that Maarten used a DBK strop for a bloody Baton!! 😅

@stockroom2 6 месяцев назад

I’m glad someone else caught that. I was watching and was like wtf? That’s a bloody DBK strop. Then I started to wonder when the DBK compound would come out ;)

@sharpfactory3705 6 месяцев назад

Why did you use your DBK strop as a baton ?

@DutchBushcraftKnives 6 месяцев назад

The compound was contaminated with a wrong grit size 🫣

@paullmight42 6 месяцев назад

you could actually see the burr form...not sure I have ever witnessed that before...

@BackyardDispatcher 6 месяцев назад

I got scammed on a ChinaCo clone.

@hanktheknife4352 6 месяцев назад

PShocking, if cooies were sold for the same price at legal stores, but righteous for „price hunters“ who think less than half the price is a bargain.

@DutchBushcraftKnives 6 месяцев назад

ive seen a lot of scam fallknivens here on the second hand market places selling as new for half the price. A lot of people fell victim to it sadly. Lot of people get excited for the good deals and in the end they get scammed :(

@hanktheknife4352 6 месяцев назад

I think i know by now that the price often stands for its self but up and then i find myself buying 30m Gorilla-Tape for 1,- which turns out as hamster glue…