BMW 5 Series E39 Interior Lights Installation - 4th Generation - 1995-2002

Подписаться 41 тыс.

Просмотров 25 тыс.

50% 1

BMW 5 Series E39 Interior Lights Installation ‪@PrecisionLED‬
Complete interior lights installation setup of BMW 5 Series E39. ‪@PrecisionLED‬
Find it here:
Standard: goo.gl/u29NwA
Premium: goo.gl/jW7fyD
This how to video demonstrates the installation of LED lights compatible with 4th generation BMW 5 Series E39 - years
1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
Direct Product Link:
Standard: goo.gl/u29NwA
Premium: goo.gl/jW7fyD
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our RU-vid Channel. It's nice to know our customers and friends care!
00:00 - Intro
00:58 - Front Map LED Installation
02:01 - Vanity Mirror LED Installation
03:20 - Rear Dome LED Installation
06:53 - Front Dome LED Installation
09:34 - Door LED Installation
11:31 - Trunk LED Installation
12:48 - License Plate LED Installation
14:08 - Outro
⇢ Subscribe: ru-vid.com...
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
#precisionled #interiorledlights #Ledinstallation #bmwinteriorlights #bmwledlights #precisionledlights

Авто/Мото

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@brianobrian6637 2 года назад

You have made a LOT of E39 owners very happy!! T.Y.!!

@huskyts6124 Год назад

Thanks very thorough

@Illyrian_Adventures 5 лет назад

nice video. Thank you

@PrecisionLED 3 года назад

Thank you for tuning in!

@austigm3888 7 лет назад

thanks.. thumbs up

@PrecisionLED 3 года назад

Thank you for watching!

@captainfallsalotatppic2508 Год назад

Do you sell the Bimmer badge led projector light for the puddle lights? If you do not, will you and when will those BMW badge projector puddle lights?

@rafaliciousbmx 2 года назад

I have done the LED replacement but my dome lights don't work with the LEDs. What specific bulbs do I need to get for these? As I have been through a few sets now and nothing has worked, I have pretty much given up. Can someone help me out?

@gamrboy100 4 года назад

How do you get around the car's system for checking for dead bulbs, which will cause LEDs to flicker every 30 seconds or so for exterior lights...

@PrecisionLED 3 года назад

It is important to install a higher quality Canbus LED to ensure you do not experience any dash errors, flickering, or other issues with your bulbs. We only carry high quality Canbus products for this exact reason.

@niallwalker4220 6 лет назад

What about the two gearstick illuminator bulbs in that overhead unit ?

@PrecisionLED 6 лет назад

I do believe the bulbs you a referring to are stock LED, which you cannot replace as they are soldered to a chip and board.

@niallwalker4220 6 лет назад

PrecisionLED cheers. Mine weren't on but I think it's an issue with a control unit.

@Hatmyson 8 лет назад

Why the prices of your LEDs are much higher in your website than Amazon's? Am a little bit confused because am considering to enhance my Kia Optima with your LEDs .

@PrecisionLED 8 лет назад

+Abraham “Is HatMi” Al- HatMi What product are you referring to? Packages on our website and Amazon are built differently.

@nicksantoro6183 4 года назад

What exact lights do I need to look up ? I have a problem with the bulb on the left side of the car when I open my door the back light doesn’t turn on the left side but when u press it it works. It’s the bigger light not the one where u press the black button with the circular light. What’s the bulb that I need

@PrecisionLED 3 года назад

If you send us a picture at help@precisionled.com we should be able to suggest a bulb for you!

@gamrboy100 4 года назад

are all festoons the same size?

@PrecisionLED 3 года назад

We have listed the map would be BA9S, the dome, courtesy, trunk, and vanity lights would be 42mm, and the glove box and license plate LEDs would be 39mm.

@templartookie2122 7 лет назад

I have an e39. Exactly what led kot is that and can please label exactly what bulbs i need

@templartookie2122 7 лет назад

All the festoons you put in are they 39mm?

@PrecisionLED 7 лет назад

We have listed the map would be BA9S, the dome, courtesy, trunk, and vanity lights would be 42mm, and the glove box and license plate LEDs would be 39mm.

@sdghorayeb 4 года назад

Please i need the numbers and size for all fastons for e39

@PrecisionLED 3 года назад

We have listed the map would be BA9S, the dome, courtesy, trunk, and vanity lights would be 42mm, and the glove box and license plate LEDs would be 39mm.