BMW e30 m52 turbo winter maintenance. S03E04 Finishing the brakes 

Luckily not this time :D I did screw in new mounts to the roof.

What modifications you did to fit e38 calipers into e36 non M

@@mrmizou001 did you find any answers? I’m doing the exact same thing now. E38 4-pot callipers on my e36 328.

ughh.. I should have write down the actual part number of those 😅 I don't even remember anymore. It could be that it wasn't even countryman rotors... I'm pretty sure it was the 294x22 rotors from R56 mini.

It's actually vittu, meaning fuck :D

pazi88 hahaha yeah I heard you saying it over and over 😁 i have been once to Kuopio but could not understand the Finnish....

No. Stock brakes are biggest that you can ever fit to those.

Mini countryman rotors.

Ei valitettavasti oo. Itekki tarvisin, vaan alkaa nykyään olla melko suolasen hintasia nuo...

Thanks! Fronts are Mini cooper r53 294mm discs

@@pazi88 how much wide this discs?

Watch his previous videos. He explained evereithing.

@@tiitsaul9036 Yeah everything is explained in first episode. And you can use brembo catalogue to see the sizes of brake discs.

@@pazi88 oh, sorry, i havent even noticed theres a first episode, subbox cheated on me

E36 328 calibers and discs with adapters. There is english subtitles, so you can understand.

My adapters are only for front. Rear ones are for e36 brakes. And I could fit 15" wheels with those.

@@pazi88 every1 is telling me that i need at least 17 inch wheels to fit them on... Will i be able to fit this on the rear too? I did a ug conversion and rear i already have big brakes bracket but am not sure if its for e38 brakes too. Do you have facebook?

Jos jotain toimivaa ja jopa tehokasta aikoo rakentaa niin rahaa menee tuhansista kymmeniin tuhansiin. Hyvä suunnittelu ja kyky tehdä ite osia säästää rahaa tolkuttomasti. Kiinasta saatavat "halvat" turbosetit yms hilppeet ei oo avain onneen, ne ei jopa edes ole yhteensopivia vaikka pitäisi.

@@henkkka7784 Okei, kiitos tiedosta :p Tehoilta aattelin jos jotsin 300heppaa yrittäs saada nii ei sillai mitään niin hirveen tehokasta mut nii.

Yes these 4pot brembos need bigger master cylinder. But it will be in next video.

pazi88 will e38 4pot brembo fit a non M e36 325i ?

@@mrmizou001 Straight fit - no. But everything can be fitted with proper fabrication.

@@luukere6695 thanks for the answer I just wanted to know which rotors we should instal to fit in the e36

Mini countryman disc.

Yes, but those are wider and have wrong bolt pattern.

@@pazi88 A right, 5 lugs! I just saw your lsd video, I have another question: My pressure rings had wear on them, so I bought the racing diffs shim (0.5mm) and had the machinist take off 0.25mm off each pressure ring. I read later that this removes the hardened surface and makes it wear quicker now. Do you have any experience in that?

@@GTO2800The diff parts are fully hardened. Not just from surface. No problem machining down those.

This adapter only works for e30.

@@pazi88 if i get the specs of the e36 spindle and the disc, could you make it? There are soooo many questions regarding this calliper on e36s all over the internet. You would help so many people, and open a whole market of easy available big brakes to e36s. That’s facts.

@@listdude Sorry don't have time for that. But e46 330i/330D brakes are huge, cheap and basically bolt on to e36, so I would go that route. You will need to 17" wheels with those

@@pazi88 time is always the thing you want more of. I already got the e38 4-pots, so I’ll stick with them. I will the adapters on my own, it will take time because I don’t have any industrial equipment, but I got the knowledge to do it I think. Thanks!

I'm using stock e36 radiator with the built in expansion tank and e39 AC-fan. Works flawlessly.

@@pazi88 the radiator is from the E36 318?

@@breaddy1 All are same here. Only difference is between cars with or without AC. With AC you got taller radiator (which I got)

Joo tosiaan en kattonu ennenkun kommentoin. Terästähän ne

Mä meinasin laittaa e36 een taakse e39 530d takasatulat ja levyt. Sovittelin jo kaikki paikalleen mut sit päädyin wilwoodin dynalite satuloihin ja e39 levyihin. Noi liukusatulat on vähän perseestä. Auto on ralliauto

Mulla ois ne satulat vielä tallessa jos kiinnostaa , jos et saa tehoja tarpeeks noilla. Ne käytetyt 530d levytkin ois kun ostin sit uudet niille wilwoodeille

@@jolli84 E39 satuloita ittekkin kattelin keveyden vuoksi, mutta ei niitä tonne ois saanu mahtumaan. Mutta hyvin on jarrutusvoimaa tossa setupissa. Pitäs laittaa vielä absit toimintaan, kun turhan herkästi saa lukkoon :D

Ei oo tullu vastaan, mut varmaan mahdollista kun tarpeeksi modaa. Tämäkään ei ollu ihan plug and play asennus :D

@@pazi88 Joo aika kompleksinen trial and error prosessi taitas olla. Löytyy kyllä kiinnikkeitä Porschen Bremboille mutta ne porsaan satulat lienee sitten jo eri hintaluokassa.

Yes. I have linked the files that I did use. Though there is small problem in those, that only came up later. Once the rotors heat up in hard braking, they start to hit the pad mounting hardware. So the rotors need to be machined slightly smaller.

@@pazi88 ok thanks . What diameter are the disks ?

@@pazi88 can I just drill the holes a bit further so I have more clearance?

@@ThirstE30 Maybe. But I wouldn't recommend that.

Siinä on e36/e34 vakio jarrut paremmilla paloilla. Niiden kanssa ei oo ollu probleemaa että tuskin ainakaan heti ollaan päivittämässä.

It's been a while, but I think it was 10mm for the bracket and 8mm for the "spacer"

Eipä oo tullu testattua. En oo itse ollu edes Oulussa pariin viikkoon.

www.300mm.de/

Meinasin vielä laittaa jotain hauskaa kommenttia siihen tyyliin +10hp pysäytysvoimaa, mutta ei oikein istunu siihen :D

From bmw e38

On siinä jo leima ;) Eipä tuossa nyt muuta kyseenalaista ole kuin spacerit edessä mutta eri vanteilla niitäkään ei tarvi.

saahan niitä e30 vakio jarruja parantaa. :)

@@pazi88 Siellä ne traficomilla kyylää ku jätkä polttaa tigillä jarrulevyä ja poraa/hitsaa takatukivartta😆

Huonot konttorit sielläpäin jos ei jarruja saa parantaa

Ei ite ainakaan tahdo jaksaa kattoa niin pitkiä videoita :D Joku about puol tuntia on ainakin itsestä hyvä mitta.

Jep mutta jokpaikassa puhutaan kovuudesta, niin käytetään sitä nimitystä :D

I don't see why not. Though you would need to locate suitable brake rotor for that and these adapters that I designed, most likely wont work with that.