No video :(

BMW F30 N20/N26 Water Pump & Thermostat DIY (328xi, 328i, 528i, Z4, X1, X3, 428i, 228i & more)

Подписаться 346 тыс.

Просмотров 101 тыс.

50% 1

►The modern BMW engine is getting more and more electronically controlled. This includes the water pump found in the N20 and N26 (along with others) engines. Because it is not a belt driven water pump, this job is relatively simple with just a few tools and a little know-how. This job should be done if you are seeing any leaks coming from the water pump or thermostat housing but also if you are seeing fault codes 2E81, 2E82, 2E85.
Gareth Foley, our BMW Catalog Manager, is back in another video to walk you through the steps of replacing the water pump, thermostat, and faulty plastic upper radiator hose. This flange is known to fail and this job is a perfect opportunity to upgrade to an all aluminum flange to eliminate the problem.
Buy These Parts Here:
Water Pump: www.fcpeuro.co...
Thermostat: www.fcpeuro.co...
Aluminum Coolant Hose Flange: www.fcpeuro.co...
Buy Tools Here:
Nut Driver Set: www.fcpeuro.co...
Band Hose Clamp Pliers: www.fcpeuro.co...
Flip Socket: www.fcpeuro.co...
SUBSCRIBE: www.youtube.co...
These Parts Fit:
BMW 328i
2012 BMW 328i Engine Water Pump
2012 BMW 328i 2.0L L4 Engine Water Pump
2013 BMW 328i 2.0L L4 Engine Water Pump
2013 BMW 328i Engine Water Pump
2014 BMW 328i Engine Water Pump
2015 BMW 328i Engine Water Pump
2016 BMW 328i Engine Water Pump
BMW 528i
2012 BMW 528i Engine Water Pump
2013 BMW 528i Engine Water Pump
2014 BMW 528i Engine Water Pump
2015 BMW 528i Engine Water Pump
2016 BMW 528i Engine Water Pump
BMW 528i xDrive
2012 BMW 528i xDrive Engine Water Pump
2013 BMW 528i xDrive Engine Water Pump
2014 BMW 528i xDrive Engine Water Pump
2015 BMW 528i xDrive Engine Water Pump
2016 BMW 528i xDrive Engine Water Pump
BMW Z4
2012 BMW Z4 sDrive28i Engine Water Pump
2013 BMW Z4 sDrive28i Engine Water Pump
2014 BMW Z4 sDrive28i Engine Water Pump
2015 BMW Z4 sDrive28i Engine Water Pump
2016 BMW Z4 sDrive28i Engine Water Pump
BMW X1
2013 BMW X1 sDrive28i Engine Water Pump
2013 BMW X1 xDrive28i Engine Water Pump
2014 BMW X1 sDrive28i Engine Water Pump
2014 BMW X1 xDrive28i Engine Water Pump
2015 BMW X1 sDrive28i Engine Water Pump
2015 BMW X1 xDrive28i Engine Water Pump
BMW X3
2013 BMW X3 xDrive28i Engine Water Pump
2014 BMW X3 xDrive28i Engine Water Pump
2015 BMW X3 xDrive28i Engine Water Pump
2015 BMW X3 sDrive28i Engine Water Pump
2016 BMW X3 sDrive28i Engine Water Pump
2016 BMW X3 xDrive28i Engine Water Pump
BMW 328i xDrive
2013 BMW 328i xDrive Engine Water Pump
2014 BMW 328i xDrive Engine Water Pump
2015 BMW 328i xDrive Engine Water Pump
2016 BMW 328i xDrive Engine Water Pump
BMW 428i
2014 BMW 428i Engine Water Pump
2015 BMW 428i Engine Water Pump
2016 BMW 428i Engine Water Pump
BMW 428i xDrive
2014 BMW 428i xDrive Engine Water Pump
2015 BMW 428i xDrive Engine Water Pump
2016 BMW 428i xDrive Engine Water Pump
BMW 328i GT xDrive
2014 BMW 328i GT xDrive Engine Water Pump
2015 BMW 328i GT xDrive Engine Water Pump
2016 BMW 328i GT xDrive Engine Water Pump
BMW 228i
2014 BMW 228i Engine Water Pump
2015 BMW 228i Engine Water Pump
2016 BMW 228i Engine Water Pump
BMW 428i Gran Coupe
2015 BMW 428i Gran Coupe Engine Water Pump
2016 BMW 428i Gran Coupe Engine Water Pump
BMW 428i xDrive Gran Coupe
2015 BMW 428i xDrive Gran Coupe Engine Water Pump
2016 BMW 428i xDrive Gran Coupe Engine Water Pump
BMW 228i xDrive
2015 BMW 228i xDrive Engine Water Pump
2016 BMW 228i xDrive Engine Water Pump
BMW X4
2015 BMW X4 xDrive28i Engine Water Pump
Get free parts from FCP Euro:
www.fcpeuro.co...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@CastroJordan 3 года назад

When I replace the water pump, I also do the thermostat. For a few more dollars you can replace all the hoses which have the plastic connectors that get brittle with high mileage. If you are replacing the hoses, the lowest one drill a 1/4” hole and drain cleanly. As it drains take higher connections apart to vent and drain completely.

@gottgaame Год назад

Few more hundred dollars lol

@carlosgarcia-uz4su 3 года назад

Excellent explanation you are some kind of professor for tech school peace

@Victordamus98 Год назад

Great video. Unfortunately, my BMW 428 was a pain in the a** due to the steering rack making it difficult to insert my E12 socket. The work around was using a 3/8 ratchet wrench. I was hoping it would be as easy as you showed hahaha.

@cristianfrizziero4604 11 месяцев назад

I'm in the same situation with my 328i F30.... the 2 bottom bolts are pretty unaccessible due to the steering rack!!! I find a very uncomfortable orientation for my ratchet wrench to remove them, but i'm very worry to see if then I'll be able to put them again.....

@carlton997 7 месяцев назад

I installed the top bolt first, and then I used a small 1/4 ratchet with a 1/4-3/8 adapter and a small E12. Take your time, and they go right in

@dwaynebolan2583 3 года назад

More F30 videos please!

@rogervonschleusingen4603 Год назад

BIG FREAKIN JOB, HOLY CRAP !!!

@mathanraj8198 3 года назад

Your explanation is good can understand easily will help me to change my water pump in future. Thank you 👍

@evelincuh1890 2 года назад

How can I access the 2 bolts at the bottom?? I have a rwd the subframe covers the bottom of the pump

@velorider562 7 месяцев назад

Did this today on a non-xdrive and the 2 lower water pump bolts and hidden above the steering motor. The secert is a 10m splines ratcheting wrench and address from behind the subframe. The longer the wrench the better. I used a mountain 10m offset wrench. Thats to abother video for the wrench tip.

@fcpeuro 7 месяцев назад

Great tip, thank you for commenting!

@x3overland632 3 года назад

Thanks Gareth!

@digiilovo9177 3 года назад

I appreciate you Mr Foley

@ravewanderer 2 года назад

If not using a vacuum, do I keep the bleeder screws closed during the self bleeding process? Where does that air go?? Thanks 😊

@Stxxology 3 года назад

Did you have to remove the sub frame to get the bottom two bolts out

@Turbowagon 2 года назад

Coolant used to taste sweet. The bittering agents have been added over the years to discourage pets from drinking it and dying.

@theoverlord6437 3 года назад

i changed both water pump and thermostat and the radiator fan is still full blast

@fcpeuro 3 года назад

Have you checked the temp sensor connected to the fan?

@theoverlord6437 3 года назад

@@fcpeuro actually....it is working now...looks like computer needed to relearn

@theoverlord6437 3 года назад

@@fcpeuro location of the temp sensor, please

@JP-vs1ys 2 месяца назад

good lord...cameraman....steady on.

@fcpeuro 2 месяца назад

👀

@iTsBlue2 Год назад

could you guys do a video of this on the f30 335i n55 engine?

@DavidWendel 3 года назад

When you pull the hose how much coolant actually comes out? A gallon, more or less?

@hlatsem 2 года назад

Excellent video, thank you so much. It is extremely helpful.

@Abdalrhman_Kilesee 6 месяцев назад

Excellent 👌

@TranquilRide 2 года назад

16:27 reinstalling thermostat

@farrelchinnappa9484 9 месяцев назад

Hi ,my n20 engine ,water pump keeps running after ive switched off vehicle and drains battery ,i did experience a leaking pipe few days before this i replaced pipe but now i have this problem of the pump continously running ,even if connect a new batter without starting up car the pump starts to run

@thabonkuna8588 9 месяцев назад

Hi, i have the same problem on my F30 320i 2015. What could be the problem? The pump or sensor?

@arzenemini9042 6 месяцев назад

have any of you fixed this? please let me know as this shit is happening to me too @farrelchinnappa9484 @thabonkuna8588

@Drtbiker88 3 года назад

Can you please do the same how to for an F30?335i xDrive too? Thank you

@johnclark7406 3 года назад

He has. It's in their library.

@Pislui 3 года назад

I was there while you where filming :D

@Kurisutof4 3 года назад

I guess it was during summer because he feels so hot

@Pislui 3 года назад

actually was last week

@Oceansky521 2 года назад

On the 320i do I need to drop the power steering to have better access to the bottom bolts?

@jvkelee 3 года назад

Can we get some B46/48 engine (F48) repairs and maintenance videos - like transmission fluid change, diff fluid change.

@sylvesterjohns9610 Год назад

Nice video

@joeblow4795 3 года назад

Awesome video even though cameraman blows. "We will take off this bolt and this bolt." Cameraman stays on your face. "As you can see, the hoses start to collspse" Cameraman stays on your face; quick glace at out-of-focus hose, then back to your face.

@Jayjohnson0831 7 месяцев назад

Right? Lmfao horrible video. Doesn’t mention how much coolant to add, and said the coolant was 50/50 coolant and anti freeze, did he mean coolant and water??

@mdang3662 Месяц назад

Can you please help... My car BMW 2014 X3 F25 the Electric Water Pump Bleeding was working fine twice. Then, it stop after I used the Blue Devil Head Gasket Sealer. The Engine getting hot. So, I changed the Thermostat and clean out the Reservoir Tank. Same issue. Should I change the Water Pump? Is there fuse that I should check? I got 3 Codes: 1) CD9010 LIN, Message: Electric Coolant Pump: Missing. DTC Status: Current 2) 1A2004 Electric Fan, Actuating Wire: Line Disconnection DTC Status: Current 3) 1A2002 Electric Fan, Actuating Wire: Short Circuit to Ground DTC Status: Current Please help :) Thank you & God Bless

@cristianfrizziero4604 11 месяцев назад

Is there any possibility to check the pump functioning by applying 12V directly to the pins, without removing it? The bleed procedure is not working in my case but i'm not still sure it is failing.... any idea?

@parthdinubhai 2 года назад

if you plan to do this on an f34, be prepared, the water pump alignment is a huge pain

@nuttr2611 2 года назад

The BMW service center is quoting 18 hours of labor for this on a 2015 X1 …

@fcpeuro 2 года назад

You can do it!

@MarioDallaRiva 3 года назад

Great instructional, Gareth. Thanks! Camera work was awesome. That air filter box looked like a meat smoker! Mmmm, ribs.... ?: When should the coolant hoses be replaced, realistically? Age? Mileage?? Thanks.

@argieary Год назад

Sir, can I ask, my BMW is F30 320i, yesterday I replaced the thermostart after it was finished I was bleeding but the water pump didn't drain the liquid into the reservoir tube, I have followed the steps, are there any other problems on my BMW?

@argieary Год назад

Sir, may I ask, I have just replaced the Bmw f30 320 i water pump, I tried blading it with the tutorial sir, the water pump therapy doesn't turn on, is there any other way, sir?

@Adam-jq6xl 3 года назад

I've seen other people drain the coolant from the lower radiator hose as well as the water pump. Is that necessary, or is draining from the water pump all that's needed?

@user-fo6iu7ti8x 5 месяцев назад

Can a bad pump cause a missing lin code

@redihoxha2940 2 года назад

I have check the engine light on my 328i 2013, first when I've test with obd2 shows a lin bus error, CD8E10, CD8E12 I've replaced the accumulator regulator anything has been changed. then added CD9010 and 1D2404. A mechanic told me that the pump communication module blocks the signal puts the whole network in emergency and turns on the check engine for that the water pump should replace. He disconnected the water pump and the check engine light stayed off. Should I replace the water pump?

@Enthusiast_Plus 9 месяцев назад

The assumption is the hoses are replaced as well during this service interval?

@fcpeuro 8 месяцев назад

Correct!

@JR-tl8tg 4 месяца назад

would this be the same for F34? Thanks

@mascho22 7 месяцев назад

question please: Could the vacuum leak test detect a (coolant) head gasket leak if there was one present?

@allisonspringer8152 7 месяцев назад

Technically it can but it would be difficult to know that the leak is actually coming from the leaky head gasget. If you had a coolant pressure tester and pressured the system you can pull the plugs and get a camera in the cylinders to see if any coolant got in the cylinders. Multiple ways to check a bad head gasget

@allisonspringer8152 7 месяцев назад

@01wesleyduarte Год назад

hello!! can i change the straight connector for square connector on the electric water pump? The pumps are the same as the N20 engine with different connectors. I've seen you do this with the high pump connectors.

@Stxxology 3 года назад

Ordered a new water pump off FCP but the Only thing I’m struggling with is trying to get the back two bolts out. Not sure how you got them did you take out anything else to get to the two bolts?

@Orlandobori 3 года назад

At what mileage does this part tend to fail on the f30 n20

@slscamg 3 года назад

I’ve seen anywhere from 30k miles all the way to people with 120k stating they are on the original one. My N55 is at 91k miles and still going strong.

@john-vy1ml 3 года назад

Mine just failed at 102k

@anggasss 3 года назад

mine 115k miles still going strong

@jnorriect 3 года назад

Mine just failed at 125k. Just past the extended warranty

@zeroyon4562 3 года назад

@@jnorriectOof, how typical though.

@dogchainsaw3923 3 года назад

Hey FCP euro. I recently just picked up a 1995 Audi UrS6, and I want to do the timing belt change. Can you make a DIY video on it plz? Thank you.

@victoriadaly8734 3 года назад

Do you have to remove the subframe

@brandoncarter707 3 года назад

No you do not need to remove the subframe

@Stxxology 3 года назад

If you guys happened to do this how’d you get the bottom two bolts out? Seems super tight

@Stxxology 3 года назад

@@brandoncarter707 ?

@Man-Up-G 3 года назад

@@Stxxology Any update on those two bolts? Going to be tackling this job tomorrow…yay

@amiteshwarsachdeva7467 Год назад

@@Man-Up-G hi bro i think our cars are rhd did u figure it out?

@philiplee7604 3 года назад

Gareth, Did you pre-mix the coolant concentrate ( 50/50 ratio ) with demineralised water as per offical BMW factory recommendation? As always, an impressive tutorial!

@aldrichchua9298 2 года назад

Do you need to take of the belt?

@gtgt525 8 месяцев назад

How to program a new water pump to a BMW 328 xi

@TranquilRide 2 года назад

8:58 thermostat removal

@johnclark7406 3 года назад

Gareth, Which is easier? Doing this job on the N55 or these N26/20's? Imo the N55 looks easier even though you really need to be under the vehicle.

@YTuberosity 2 года назад

I would say the N20 looks easier given the N55 is so tightly packaged.

@Oceansky521 2 года назад

I'm having a heck of a time getting bottom bolts out..have steering in way. He must be showing on xdrive

@darth_art2101 2 года назад

Why is my steering rack in the way. I can’t get to those bottom bolts on the pump

@darth_art2101 2 года назад

Well I had to unbolt the rack and move it a bit out of the way to get to the bolts. It’s the only way…in case anyone runs into a similar rack

@davidbarlow7955 3 года назад

Hose damage on deep vacuum ?

@biz4twobiz463 3 года назад

Nope. It's actually the preferred method these days.

@mrrepoo 2 года назад

Where is the fuse for this??!

@rayl3329 Год назад

Hello, Is the vacuum procedure absolutely necessary?

@fcpeuro Год назад

Hi Ray, it just helps in filling the system a bit easier, you can run the self-bleed procedure on the water pump a few times to reach the same goal without that tool!

@rayl3329 Год назад

@@fcpeuro Thank you!!

@05kittycat1 3 года назад

Hi I had the code P0597 come up and I just purchased the thermostat off of FCP and starting to gather everything to replace it but I noticed my lower radiator hose is collapsed, is this associated with this code or should I be worried about the radiator?

@parthdinubhai 2 года назад

I have the same code with no hose collapse

@05kittycat1 2 года назад

@@parthdinubhai I would definitely try replacing your thermostat as soon as you can and don’t drive your vehicle or start it and if you attempt doing it yourself make sure your battery is in good health because you will need it for the bleeding process

@renanperez1616 Год назад

I’m driving a 320xdrive bmw2015 and my dashboard shows a massage (engine overheating )but my temperature gage is not showing overheating And the engine lose power I don’t know if it is the water pump or thermostat. What has to do engine loosing power in relationships to water pump. Thanks

@nosurrinda420 3 месяца назад

Did you resolve this mines doing the same I think it’s my water pump at this point

@renanperez1616 3 месяца назад

@@nosurrinda420 yes. I had to replace water pump.

@nosurrinda420 3 месяца назад

Where did you purchase your water pump I got mine at rock auto coming in on Sunday

@nosurrinda420 3 месяца назад

And the water pump resolve your issue

@renanperez1616 3 месяца назад

@@nosurrinda420 yes water pump Solve the issue I purchased @ dealer bmw Don’t buy refurbished

@dronevisiontechnologies2710 3 года назад

Can a bad water pump cause mixture codes on e90 n52? I can't get rid of three codes. 2e85, 29e0, and 29e1 mixture control rich condition. Pumps seems to work fine but definitely is rich i can I can smell it sometimes. If The water pump is bad Our place it no problem I just don't wanna buy a pump that I don't need so Any opinions would be fantastic and appreciated, thanks

@johnclark7406 3 года назад

Drivetrain warning and/or engine fan constantly running are signs of a failing water pump. They tend to fail slowly.