bmw r1200gs final drive boot grease service Maintenance ASMR 

The best final drive service I ever saw in my life, I wish the BMW mechanics were like this. Great work sir! You should be very proud of your professionalism. If you lived near Switzerland I would put my bike in your hand all the time.

If there was a mechanic around here I have a feeling he would be doing all my service. Best motorcycle mechanic I have seen.

I swear this video has therapeutic effects on me. Masterful job! You are an inspiration.

Fantastic. Thank you for posting this video. It's nice to see a mechanic who takes pride in his work. Bravo !!!

Inspiring job on the rear drive - this is how I wish my service to be done. DIY will be on a new level after this lovely video.

Motorcycle maintenance ASMR?!?! My life is now complete

Wow, what a pleasure to watch! I'll be doing the final drive service on my RT myself over the winter, and will use this video as inspiration. Thank you for taking the time to post it!

Enhorabuena por tu profesionalidad. Ojalá todos los mecánicos amaran su trabajo como tu. He disfrutado mucho el vídeo, envidio al dueño de esa GS.

enjoyable to watch someone who cares about his work.

와.... 정말이지 완벽한 정비입니다.. 보는 내내 힐링되는 느낌이네요

Just the best I’ve seen, your an inspiration, I’ve learnt so much, thanks for sharing, 😃👍

Many thanks for the excellent video, which I'll use for the basis for my r1200rt. I would have liked to have seen what you did at the transmisssion end when re-installing the shaft and gaiter, as most people seem to have problems with them.

complimenti, un lavoro eccellente e una cura maniacale per i dettagli. grazie per il video!

Super professional and thorough. Very impressed!!

thats the way to do it, great job!!

outstanding professional mechanic 👍🏻

Fantastic job !!

All ur videos are fantastic. And is very informative thank you

Great video ! thanks

I think BMW technicians need to be trained by you sir you take great pride in your craft awesome 👌👌

작업 깔끔하시네요!!!

Very professional work !

The shaft on my old 650 Katana never had any problems; I changed the oil once. Otherwise I never thought about it.

Awesome, why most videos don't undo the Pivot bolt and release the whole FD? Great job

마음이 너무 상쾌해지는 영상이네요

amazing ........man loves his work...

Amazing job !

진짜 너무나 깔끔하고 정확한 정비여서 놀라울 따름입니다... 정비 가이드도 아니고 현장에서 주요 체결부위에 들어가는 볼트를 저렇게 깔끔하게 시야기(?)를 내시는 분은 처음 봅니다... 잘보고 갑니다!

bravo ! un travail et une attention parfaite ! pas certain que beaucoup de mécanicien travaille ainsi @hans factory : 1 - what is the white compound used at 10:15 ? 2 - why didn't you change the wheel bolts, they seem to be used and damaged Thanks

Amazing service, very impressive.

Beautiful workmanship

good work Hans

Awesome job Bro!

Very professional work, Bmw has to do training with you, congratulations 👌👏👏👏

Wow, the rear wheel lugs where barely tight, makes me want to check mine.

이게.. 꼼꼼하게 작업 하시는거ㅜ보니 믿고 맡길 수 있는 실력이 있으신것 같네요. 스냅온 탭 세트는 괜히 탐나네요 ㅎㅎ

항상 잘보고 있습니다. 저는 구동계 자가 정비는 샵을 통해서 하지만... 기본적 지식은 알아야 할것같아... 챙겨보고 있습니다... 감사합니다. 깔끔한 영상과 설명~ 역시 전문가에게 맏겨야 합니다.... ^^/

Thank you for sharing your extensive knowledge. As a result of watching your video, I will be servicing the final drive on my 15,000 mile, 2014 R1200GS soon, here in Sacramento.

Top work!

I will frame this video and put on the wall in my garage 👍 Respect.

Complimenti! Sei davvero eccezionale nel lavoro eseguito come un maestro! Bellissima la chiave dinamometrica elettrica che hai usato, sai dirmi la marca o puoi consigliarne qualcuna? Un saluto e ancora bravissimo!

5 Star best drive service on You Tube I wish you lived in Ireland you would by kept very busy.

您重新定义了标准，太棒了。

Friend, do this maintenance with the motorcycle clean, it gives a better impression and avoids the contamination of the new product.

Fantastic vídeo . The best I’ve ever seen. Could you describe the greases you utilized? Thanks

Brilliant. 🏍🏍🏍👏👏👏

Complimenti per la scrupolosa manutenzione 👍

안녕하세요 영상보고 댓글 남겨요 일단 정말 정비실력이 대단하신거 같아요^^ 이거말고도 다른영상도 많이봤는데 볼때마다 참 깔끔하시고 정확하신거 같아요. 영상에서 기어에 녹제거 하실때 쓰신 공구 이름이 뭔가요? 에어로 연결해서 쓰는건가요?

Hello Sir, een excellent job you did do, to see a mechanic working instead of a amateur is good to see, I just have one question if you do not mind, why you put the Staburags grease just on the boots and not on the splines. As far as I know Staburags npt 30 is more suitable for splines then the castrol TA grease, also the Castrol MP3 grease is better for the job I think. I am sure you have a good reason not to put the Staurags on the splines, can you tell me and enlighten me? Keep up the good work.. :)

you are the best

Hi! I thinking about paralevel bolt, what do you thing to tight it down after we put bike on wheels and sit on it? It is a rubber bushing inside it? When we tight it when the bike is on central stand, we make „0” position on stand, not on wheel, so they can damege quickly. What You think?

Great video Hand. Please tell us what is the grease gray and the white you add to the bots. Also what is the screwdriver doing in the front boot holding what?. Congratulations for such a clean job.

Great video Hans. I have a 2016 R1200GSA it appears that the FD does not drop down so I can grease the shaft and the FD. All bolts are removed and the boot released. Have you any suggestions how to release it so I can clean and grease ?

Thorough!

Awesome

Why chain? - they asked - it requires maintenance Driveshaft however is maintenance free - they said

The Best Salu2 de vuestro más fiel infiel Pako

Your like Bob Ross with that grease 🤣

Does propshaft joins require greese? They work hard with every rotation.

Excellent, dont have BMW but very watchable :-)

Молодец!!!

The best.

I watched in order to see the drive shwft un and install. Couldn't see the front install. ,I'm still wishing that.

wow very good job , very impress , what country are you from ? should show this video to all the service center of bmw

a very delicate and complicated motorcycle, I would be afraid to travel far with it

👍

great video and very interesting. I wanted to know, if possible, what acronym does the castrol you use have to buy it?

Oh wow, now that’s a master at work. Is this your bike?

What is that you are applying at 10.09?

J'aimerais bien que tu sois mon colegue 🇫🇷👍👍👍

nice job man, did this last week, bike has 70k km, maintained by a official bmw dealer, i was shocked when see the inside, even the final drive oil never changed

FYI for spline grease... "If you let a dealer or shop change your rear tire, be certain they are using Moly-60 paste or Krytox, or you're going to be needing new drive splines in about 50,000 miles. Guaranteed. I recommend you remove and replace your own wheels, leaving the spline cleaning and lubrication up to you. If you want nothing to do with this, then I recommend you have a talk with your favorite mechanic before tires come up, and buy your own tube of lubricant if necessary. Moly greases with 60% + molybdenum disulfide content: Honda Moly 60 paste, $9 for 3oz, pn 08734-0001 at your Honda dealer, or $8 from Kim Leong, STOC 3073, California Sport Touring. LocTite Moly paste, 65% molybdenum disulfide. $20 for an 8oz tube from Enco, part #505-1197, 800-873-3626 TS-70 Moly Paste, 4 oz. ctg. $14 from TSMoly. (800) 508-5545 An alternative to moly is the new poly-flourinated lubricants made by DuPont called Krytox Teflon Bearing Grease. These chemicals are simply magic. They have almost no known solvents, are chemically inert, and don't burn at any temperature, even in a pure oxygen atmosphere. This is pretty clearly the only grease to use. See this article. Nascar mechanics have found that Krytox grease can reduce the temperature of spline joints on drive shafts by 150°. Also, this stuff lasts forever. It is, unfortunately, quite expensive." motorcycleinfo.calsci.com/Shaft.html

Hans what kind of grease do you use for the drive shaft, Castrol? I mean the white coloured grease. Could you inform about brand and type of grease please? Thank you for the great video!

10:12 장비가 다 하이엔드급이시네요ㄷㄷ 혹시 이 부분에서 바르고 계시는게 뭔지 알 수 있을까요 ?

Very profesional

la spazzola per pulire e di metallo???

Hallo. Sehr genaue und liebevolle Arbeit.!!! Welches Fett benutzen Sie da genau???? L. G.

안녕하세요 ..한스님.. 대전에 사는 구독자입니다.. 영상은 틈틈히 리플하며 잘보고 있습니다.. 궁금한것이있어 댓글올림니다.. 제가 99년식 에보 헤리티지를 타고있는데요.. 타이어교체 시기가 되어 원래 출고될때 규격으로 교체하려 하는데요 .. 월래 출고사이즈 제원좀 알수있을까요..? 아님 할리코리아에 문의해야하나요? 기존 타이어 프론트 130-90-16, 리어150-80-16 으로 장착되어 있었습니다.. 답글부탁드림니다...

quanti km eseguito questa manutenzione?

Hi what a professional video !! I'm a owner from taiwan. Could you tell me which rubber boot grease you used ? Thank you so much.

Dont know about anyone else, but I felt the urge to smoke a cigarette after watching this.

Nice. I have a GS1250 with 8000 km on it. Rarely drive in rain and never in dirt. I tried to service the final drive as I learnt about the fact that BMW does not lube this from the factory. Mine is seized on the spline at the rear. I can't get it off. I saw yours comme of with the drive shaft and was hoping to see it come off but you edited. How does one get the drive shaft off from the spline when its seized on?

Superb! Couple questions/comments: - Are R1200gs driveshafts balanced, and would it benefit to mark original position of spline rotation before removing it, as well as spline position at rear hub (to keep matched from factory when reinstalling)? - Would a stiffer and slightly wider brush (just as fine) to apply Castrol and rubber boot seal pastes help to improve penetration and coverage in less time? - Would a metal brushed tapered pipe cleaner remove the gear oil sludge from the drain plug faster and better than the screw driver? - When using a torque wrench, should one attempt to push downward at the 3 o'clock position for most consistent and accurate settings? - Would it be advisable to spray the rear brake caliper and surrounding areas with brake cleaner prior to doing the work? - Should the rear tire and assembly be tested for trueness and wobble before commencing the work as well as you did after? - When using solvents coming in contact with your hands, should you be wearing gloves at all times? These are nit picky comments, considering your amazing attention to detail. Well done!

When Europe meets Asia, this is how it must be done this work .

can i use mp3 paste on the cardan shaft? is it recommended rather "castrol ta"

고무부트 구리스랑 샤프트 구리스 어떤거 사용하는지 알수 있을까요??

Excellent workmanship. Throughly processed. My BMW r1200r 2018 7000miles drive shaft failed. 1st bmw service performed at 7000m, one week later shaft splines failed. Rusted, worn out. Fortunately BMW carried out total restoration on warranty. Question is... why did it happen. Watch out shaft driver riders. Lubrication schedule doesn't appear in handbook or manuals. "Its essential "

I wonder what grease he's using...thought it was anti-seize at first, but he put it on everything just the same...

thank you for video, how many time or how many kilometric this work is necessary? which greases did you use?

What sort of grease was used?

Hallo very nice job, I want to do it on my bike as well. I want to ask how often must this service been done, how many km or years so the bike will stay in good condition?

👍♥️🇫🇷

r시리즈 정비성이 s시리즈보다 편한가요?

What year is this GS?

Nice to watch some one doing a proper professional job un like some of the others on utube that shouldn't be allowed near a tool box. Keep the vids coming, Ian.

캐스트롤 구리스롤 당최 구할수가 없네요.. 어디서 구할수 있나요?

All BMW 1200 HAVE CORROSION / RUST PROBLEMS on drive shaft spline junction.

Id be using paint tape and sealing off those roller bearings. All that rust debris is not good for them

how many thousands km has your GS?

What kind of grease is the one you are applying at 14:15?