Budget 2JZ Part 3: Detailed Assembly

Подписаться 4,5 тыс.

Просмотров 52 тыс.

50% 1

In this video I take apart the head, clean parts for an eternity, and get the 2jz na-t assembled. Hope you guys enjoy the video. Don't forget to like and subscribe, and leave me feedback in the comments!
Follow me on Instagram @Teysik
Thanks for watching!
2JZ Service Manual: www.2jzgarage.com/wp-content/...
Valve removal tool: www.amazon.com/gp/product/B08...
Intake Manifold: www.amazon.com/Rev9power-IM-0...
Turbo: eliteracefab.com/products/bor...
Misc 2jz Parts and turbo Manifold: driftmotion.com
Music by Ripjaw: / ripjawband
Parts List
docs.google.com/spreadsheets/...

Авто/Мото

Опубликовано:

30 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 224

@benlovefield6949 3 года назад

Thanks you for the video! I just pulled a 2jz-ge vvti out today. Your videos give me hope. lol

@Teysik 3 года назад

Thanks for watching, hope I can help lol

@MrTanker12 2 года назад

Thanks for your time and effort it was great to watch and your delivery is so smooth and easy to listen to no extra sales pitches just good information great video keep up the work

@Teysik 2 года назад

Thanks man I appreciate that!

@midwesttony3414 3 года назад

Super informative, I’m geeked to start working on mine💪🏾💙💯

@Teysik 3 года назад

Thanks!

@M12JZ 7 месяцев назад

Getting my engine to peices soon (2jz ge) and I will be watching all bro! Thanks for making it all proper clear with clear instruction!! Legend!

@Teysik 7 месяцев назад

Thanks! ❤️

@kuwoHasArrived Год назад

Thank God for this video, almost forgot a ton of stuff

@malarieventura1964 3 года назад

I was broke an hopeless but now I’m broke with hope and picking up a 2j from the junk yard tomorrow

@Teysik 3 года назад

Haha hell yah. We all broke 😂

@krismcleod272 3 года назад

Very detailed and easy to follow lad 👍 Best of luck with the channel

@Teysik 3 года назад

Thanks bud!

@SirYenko_ 3 года назад

Nice! great work so far!

@ybdizz 2 года назад

This is awesome information and a great video. You made it look so easy👍🏼💯

@Teysik 2 года назад

Thanks!

@basho774 3 года назад

Great project doing well with everything

@Teysik 3 года назад

Thanks!

@jayb391 2 года назад

I use a good amount of grease on the end of a screw driver to hold the keepers on the end at the correct angle to install them

@Teysik 2 года назад

Good tip

@adambond8988 3 года назад

Awesome bro can’t wait to see you get this finished. Gonna be awesome!!

@Teysik 3 года назад

Thanks dude. Cant wait to drive with you. What’s the first event you plan on going to?

@adambond8988 3 года назад

@@Teysik not 100% sure yet still gotta couple things to do to the car but it’s getting close. Main thing I gotta do is order a new driveshaft next week turns out mine is out of round or unbalanced somewhere it keeps shredding guibos even with a new csb. Once I get that though I’ll be really close! That short shifter though is phenomenal I’m about to post a vid about that later tonight. Extremely short notchy throw. Can’t wait to drive with you too brother and get some sick footage!

@boostedwheelie9058 3 года назад

@@Teysik also let me know if you ever need an extra hand on anything I'm always down to help and hang out in the shop!

@Teysik 3 года назад

@@boostedwheelie9058 thanks bud!

@mrkloss8379 3 года назад

Please keep making videos. U deserve 1m views for this typa stuff

@Teysik 3 года назад

Thank you! 🙏

@kelseygittings5830 3 года назад

I agree, I like the purple on the roll cage better💜

@Teysik 3 года назад

Notice half way through the video the valve cover color changes 😂

@kelseygittings5830 3 года назад

@@Teysik I didn't even notice😅 that's funny!

@DyerAutoMotive 2 года назад

saving this for when I attempt to build my Gs300 GE

@Teysik 2 года назад

Do it!

@DyerAutoMotive 2 года назад

@@Teysik she’s my daily beater until my genesis coupe is turbod with forged internals so it’s gonna be a little bit, but eventually I’m gonna send the 2j to the moon and blow out the frame then swap it in my 944 shell

@Teysik 2 года назад

@@DyerAutoMotive haha sounds like a good plan

@seifkeef2735 3 года назад

awesome video man! im going to be doing the same build on my sc300 and the videos will be a great help!

@Teysik 3 года назад

Thanks! Glad to help

@seifkeef2735 3 года назад

@@Teysik what ecu will you be running?

@Teysik 3 года назад

@@seifkeef2735 hopefully Link. Still working on that

@jicez6649 3 года назад

Great video! I'm going to be doing this build for my is300 as an engine refresh and getting it ready for boost. Your videos are going to be great reference once I get in the garage and start breaking down the engines and combining them.

@Teysik 3 года назад

Sweet! Glad I could help and thanks for the support!

@jicez6649 3 года назад

@@Teysik couple of quick questions, did you do anything to the cylinder walls to prep them, did you reuse the vvti engine oil pump and what brand/kind of engine prep solution did you use when putting the camshafts back in? Thank you for the insight!

@Teysik 3 года назад

@@jicez6649 I cleaned up the cylinder walls with a scotch brite pad and some wd40, I reused the vvti pump, and permatex ultra slick

@jicez6649 3 года назад

@@Teysik thank you!

@Teysik 3 года назад

@@jicez6649 no problem!

@CaRLoS-ys2ip 2 года назад

nice video bro! Thanks for hepl

@carsonmein4330 3 года назад

This is sick! Keep it up

@Teysik 3 года назад

Thanks!

@Stage123 2 года назад

Nice work

@ZaidCobian 3 года назад

just subscribed! keep them coming

@Teysik 3 года назад

Thanks!

@SoWellGarage 3 года назад

Hey man! Not sure if the timing is different since you based it off the harmonic dampener but for VVTI it's supposed to be the line, not the dots. With the VVTI gear you rotate it clock wise fully till the line is aligned to the mark. Just trying to make sure all your hard work doesn't end in disaster 😂

@Teysik 3 года назад

You can use the lines on the gears if you used the main timing mark on the dampener and not the sub timing mark. If I turn it to the main timing mark, the gear lines line up. Either way works, I just did it the way the service manual shows

@SoWellGarage 3 года назад

@@Teysik I assumed you probably did use the manual, keep up the good work man! I'm doing an NA-T build in a 99 Tacoma so I love seeing others doing the same stuff. I just finished my turbo oil lines, gotta finish all the electrical 😂

@SoWellGarage 3 года назад

@@Teysik I also lined mine from the trigger wheel on the crank, not the balancer. That's why I thought you may be right. Just wanted to make sure, don't want your hard work going to waste man

@Teysik 3 года назад

@@SoWellGarage nice! You’re on to the fun part now 😂

@SoWellGarage 3 года назад

@@Teysik yeah, thank God I actually enjoy wiring! I'm an ET in the navy so it's kinda what I do 😂 let me know if you need anything boss! Probably not by the looks of it though!

@motabikeboy 3 года назад

The cross over intake tube is actually a functional component as it dramatically increases torque.

@rustedratchetgarage6788 2 года назад

Only in NA boosted its not really needed and adds restrictions

@motabikeboy 2 года назад

@@rustedratchetgarage6788 not true, the same fluid dynamics apply to boost as it does NA. The cross over tube is efficient up to 650-700hp.

@Struckplant941 11 месяцев назад

@@motabikeboy5

@tomh2053 3 года назад

Hey man, great video series and always good to see more NA-T content on RU-vid. I'm curious, what exhaust manifold is that, and how much was it if you don't mind me asking, and finally what engine management do you plan on using with this build?

@Teysik 3 года назад

Drift motion manifold, got it from a friend for cheap but I think they’re $250-300. The goal is to use link ecu but don’t know if the budget will allow for it

@peoplesambassadordm8279 Год назад

Its motivation .. got a 2j ge..

@72Dexter72Manley72 4 месяца назад

I did this with my turbo n/a 2J build. Running 15psi on the waste gate. I put it in my 74 Datsun 260Z. I have a 92 Supra intercooler on it all blacked out. From the outside of the car the only thing that may give it away is the 2 1/2 exhaust with a flow master on it. On the inside the only thing people see is a deleted radio and a boost gauge where the clock is. Car pulls like crazy on the freeway when you get on the gas pedal above 70mph and i downshift to 4th. 💪🏾💪🏾

@Teysik 4 месяца назад

Sounds like a sweet project

@72Dexter72Manley72 4 месяца назад

@@Teysik Thanks Man. Yeah my daughter and I will break it free out of storage in the spring. 👍🏾

@TakingDownNubs 3 года назад

Nice!!

@TheNexus40000 2 года назад

Can’t wait to start mine :), video was wicked keep up the content, love the detail :), any chance your thinking of doing a coil on plug set up for the vvti GE head? Or cam sensors

@Teysik 2 года назад

Vvti has coil on plug already, it just uses one coil for two plugs. I’ll be using the stock spark system and stock cam and crank sensors

@TheNexus40000 2 года назад

@@Teysik okie perfect:) thanks for clarifying just trying to wrap my head around it all before I get started on mine :) definitely going to keep rewatching your videos to help me along with my build and budgeting it all out :) thanks for the quick reply

@danthomas86 2 года назад

Very good content, considering taking this on myself... Couple of questions if anyone can help, share their knowledge... Should the head be skimmed or is it fine not to, and also will the piston rings gaps be OK for the higher temps ran in a turbo application

@Teysik 2 года назад

You can use a straight edge to get an idea if the head is warped or not. It has to be pretty bad for the head gasket to not seal. Gapping the rings a little looser would definitely be beneficial, but not necessary for 500hp

@lucass3566 3 года назад

Great video dude! You're not getting the views you deserve yet but I hope you do! Pls do a total cost video if you can because I'm very curious. Also I recently found out that my grandfather worked at BorgWarner, and he was a centrifugal pump designer, so I'm 90% sure he designed turbos at BorgWarner.

@Teysik 3 года назад

That’s sick! I will be going over the cost eventually

@BjornFSE 3 года назад

good stuff

@Teysik 3 года назад

Thanks!

@JasonSmith-nt6rl 8 месяцев назад

What exhaust manifold are you using again? great build!!!

@Teysik 8 месяцев назад

Drift motion

@iamsamanthatrainer 3 года назад

Dammm 🔥

@henryborrero4612 2 года назад

Please do a parts and cost list video with part numbers.

@Teysik 2 года назад

I will at the end of the build

@turboimport95 Год назад

from experience I highly recommend anyone doing this to take the head to machine shop and let them do the valve job and resurface the head and install guide seals. They will also blast the head and it will look brand new. usually 2-300$ bucks but saves so much time and energy and piece of mind. Because what if the junkyard motor had a warped head etc from running hot and they junked the car..

@Teysik Год назад

Always a good idea if you have the budget for it. I’ll definitely do that when I do a fully built engine

@Diabetic_Deity Год назад

Finally got the crank bolt removed and I was wondering about the head going onto the non vvti block, the pistons and rods work just fine with the cams and everything in the vvti head? And also, when replacing the water pump or anything for the non vvti block are you using parts specified for that block? Because I know on drift motion they have let’s say water pumps specified for vvti and non vvti engines so I didn’t know what the main difference with some of those parts were

@Teysik Год назад

Yes everything works. I use parts that match the block. You will need a special oil line for the vvti solenoid, everything else should bolt right together

@fadeenanaa4495 2 года назад

great work bro! I have the n55 135i planing to swap to 2jz of course the 2jz gte is crazy expensive i found ge vvti but Im planning to get forged roads etc…. because my goal is around 800-1000 hp do you think ge vvti with forged pistons etc…. can make that power or I need gte vvti? im a bmw new to the 2jz world :)

@Teysik 2 года назад

The block is basically identical between the two. With forged internals you’ll be fine. Sounds like a sick build!

@ferasyassin8355 3 года назад

I was your 1000th sub :)

@Teysik 3 года назад

Thank you!!!!!!! ❤️

@miikaeatsbagels7320 2 года назад

Quick question on the Turbo NA-T, did you have to put a cam position sensor in for the Turbo set up in the head?

@Teysik 2 года назад

The Ge vvti engines already have one cam sensor in the head, which will suffice

@angeljuarvez3826 2 года назад

Apply a little Vaseline on the keepers or Lucas it works really easy

@Teysik 2 года назад

Definitely gunna try that next time, thanks!

@craigvanheerden8943 3 года назад

Hey, did you check the bottom end? Check bearings, hone and new rings? Or are you just running it as is?

@Teysik 3 года назад

As is. I did a visual inspection and listened for any bad noise while spinning the crank

@rq7684 2 года назад

Hey man, just one more question, what did you do with the oil pump? Did you use the one from the vvti engine or got another one I've heard the non vvti does not have the hole for the crank shaft sensor.

@Teysik 2 года назад

You are correct, you need the vvti oil pump. I used the stock one

@turbyturbo1 3 года назад

siiick

@Nick15Green Год назад

With your swap, did you get new oem sensors for the block? All mine were cut and not sure if they're in working order.

@Teysik Год назад

Nah I reused the old stuff. You can try to test them to see if they’re functional, but most of those sensors don’t go bad very often

@foxxul 2 года назад

I was looking at your parts list and was wondering if those are all required to purchase seperately or if some come already on the engine?

@Teysik 2 года назад

None of the parts listed other than the engines themselves came with the engines.

@kelsiquicksall Год назад

What size an fittings did you use for valve cover

@Teysik Год назад

I didn’t use AN for valve covers. Just used factory nipples with Rubber hoses and hoseclamps. I’ll probably upgrade to AN in the future, but that’s more for aesthetics

@exoticus_gaming 3 года назад

Hey, did you get the block hot tanked or did you just use oven cleaner for the deck and block? Did you get the deck or head milled?

@Teysik 3 года назад

No machining, and just degreaser and a lot of elbow grease for cleaning. Wire wheel on the block

@onizuka186 2 года назад

The lack of oil squiter on the ge is it really a problem? Or it will be as good as the gte?

@Teysik 2 года назад

Oil squirters are a luxury. Lots of racing teams prefer the ge block because you have more consistent oil pressure without the squirters

@dailydriftclips6128 2 года назад

what did you end up doing about the crank position sensors considering the non vvti has a distributor that looks like you removed?

@Teysik 2 года назад

The distributor is on the non vvti head which I’m not using. Swap the vvti oil pump onto non vvti block and you have your crank sensor. Cam sensors are on the vvti head

@anthonyrivera807 2 года назад

Great build bro what was your budget if you don’t mind me asking?😎

@Teysik 2 года назад

Ideally no more than $7k for the whole swap

@ThatTURK1 2 года назад

When your lining up the cam gears for the timing belt, how do you know what the allignment is in relation to the cams are, do the cams also have an indicator as to where they have to be set before install?

@Teysik 2 года назад

Yes they do, your best bet is to find the engine service manual on google and follow that

@ThatTURK1 2 года назад

@@Teysik gotchu👍🏼

@timelesssteelgarage Год назад

Are you running a stock ge fuel rail? Did you just add a banjo to AN conversion fitting. One fuel line to rail with no return? Then, just have the regulator you added return fuel to tank ?

@Teysik Год назад

Stock rail drilled with a AN return fitting welded on.

@timelesssteelgarage Год назад

@Teysik awesome Man you have been a big help for my build. Love your videos. Thanks !

@Teysik Год назад

@@timelesssteelgarage glad to help!

@andrwnguyn 2 года назад

am i doing a non vvti block with a vvti head myself and had a question. i’m confused on how the whole crank position sensor works? i’ve been seeing i need a trigger wheel and tt oil pump so i can run the sensor? and how do i install the trigger wheel if i do need it?

@Teysik 2 года назад

You just take the oil pump and trigger wheel from the vvti engine. You basically want to use all vvti parts except the block and internals

@Diabetic_Deity Год назад

Did you use the oil pump with the hole for the crank sensor? The non vvti engines oil pump that I’m disassembling doesn’t have a hole for the crank sensor so should I switch to a vvti oil pump

@Teysik Год назад

Yes, you need the vvti oil pump

@Lopernator 3 года назад

Did you open up the non vvti bottom end? Or did you just throw the vvti head on there?

@Teysik 3 года назад

I had the oil pan off to swap it and inspected the internals at that time, but that’s it.

@ryanmartinez3020 2 года назад

How are you going to give the VVTI cam gear Oil pressure?

@Teysik 2 года назад

It will be in my next video, but drift motion sells a line that feeds it off the oil pressure sensor port

@javidrumrodriguez2788 Год назад

I would have lubed up those valve seals before installing

@JAH_FAB 2 года назад

How are you going about feeding oil to the vvti solenoid

@Teysik 2 года назад

Drift motion makes a line that connects it to the stock oil pressure sensor. Then I’ll use a port on the oil filter sandwich plate for oil pressure

@generaldart6567 2 года назад

question what ecu/engine harness did you use?

@Teysik 2 года назад

JDM aristo 2jz-gte factory ecu, built from scratch harness

@HollowMon100 2 года назад

Should do a purple camo valve cover.... wouldn't have to repaint the whole thing and it will be original

@Teysik 2 года назад

That would be cool, but not my style

@Morm1175 2 года назад

Nice build man,but I check you part list for this build and is like $ 10k for all the parts with out the transmission with all the work involved I think is easy to buy a 2jz gte engine and only add single turbo kit

@Teysik 2 года назад

A 2jz gte is $6k or more. And you still need almost every other part on my list. No way you’re doing it for less than $14k unless you use stock auto transmission

@jvinclarence3977 2 года назад

How did you get the 13mm arp headstud bolts on. My 13mm socket is too wide for that opening

@Teysik 2 года назад

Need a thin wall socket

@yosifbohlega868 3 года назад

Is the transmission bmw hp30 v12 great with this engine bro ?

@Teysik 3 года назад

No idea never heard of that trans

@HaggisXS 2 года назад

Are you running the stock pistons and rods from the non vvti engine?

@Teysik 2 года назад

Yes, they’ve been used up to 700hp without issue

@andrewsandoval2517 2 года назад

So did you use a sc block or the is300 one

@Teysik 2 года назад

Non vvti sc or gs block

@ironfitter619 3 года назад

Hey bro what turbo manifold did you do with ?

@Teysik 3 года назад

Drift motion

@DLANM57 2 года назад

Is that a drift motion exhaust manifold?

@Teysik 2 года назад

Yes

@Diabetic_Deity Год назад

So I got my donor engine for the bottom half of the 2jz: 1994 Lexus gs300 my question that I can’t seem to find an answer for is would the transmission in my current 1999 gs300 be compatible with the bottom end of the donor engine? Current trans is the a650e 6 speed automatic and the donor car had a 4 or 5 speed I believe? Are the interchangeable or would I need a different trans? I don’t want to do the manual swap yet

@Diabetic_Deity Год назад

Maybe you can pm me about it or if someone has an answer to the question

@Teysik Год назад

@@Diabetic_Deity should be the same exact bolt pattern. As far as the torque converter/flywheel goes, I’m not 100% sure but I think it would be the same

@BoostedVQUR 3 года назад

Turbo specs? Cast wheel, standard bearing, .91 AR? Cheers 🍻

@Teysik 3 года назад

.91 ar, journal bearing, and I assume cast wheel. Borg Warner part number is 177275

@dronetrucker 3 года назад

Check out supra vworld, he has a similar build, used parts from GTE, and GE to build a NAT non vvti. He also sells parts, thanks.

@Kawichris636 3 года назад

What did you do to clean the Surface on the block ? To get a good seal for block and head ?

@Teysik 3 года назад

Razor blade, scotch brite pad, and lots of brake clean

@Kawichris636 3 года назад

@@Teysik awesome brother thanks

@Teysik 3 года назад

@@Kawichris636 no problem

@riodowhatever3842 2 года назад

i have a dumb question. is that a rear sump or mid sump. i am trying to swap my e36 and i wanna know which oil pan i need

@Teysik 2 года назад

Technically I believe it is a mid sump. The GEs came with either front or mid, and mid is the one you need

@frankzane7326 3 года назад

Ita gte or ge oil pump?

@Teysik 3 года назад

Stock ge pump for now

@sanjosonny2503 3 года назад

Great content bro. Question tho, what transmission you using with your 2jz?

@Teysik 3 года назад

Bmw ZF 5 speed

@sanjosonny2503 3 года назад

@@Teysik I got my gs300, was trying to see what the options were with my ge, like what you did bro. Still trying to figure out what route I take.

@Teysik 3 года назад

@@sanjosonny2503 the ZF is really small and fits in pretty much everything lol. Downside is the $1000 adapter kit

@sanjosonny2503 3 года назад

@@Teysik what do you think about the cd0009, 008?

@Teysik 3 года назад

@@sanjosonny2503 they’ve gotten expensive and they’re humongous

@walterguzman2337 2 года назад

1998 SC300 has no distributor on the side. Is that still a good strong bottomend Engine??

@Teysik 2 года назад

No, they switched to vvti in 98, that would have the weaker rods

@walterguzman2337 2 года назад

@@Teysik thanks for all the great info.

@Teysik 2 года назад

@@walterguzman2337 no problem

@williamgates392 3 года назад

Why isn't it on the normal timing mark? you didn't mention.

@Teysik 3 года назад

Because that’s the way the service manual says to do it

@giljs4290 3 года назад

The video series is very good, all very well detailed, good luck with the project. 21:55 It is better to use the top cover, if any stone or something falls on the belt it can cause a problem.

@Teysik 3 года назад

Thanks! I’m thinking of running the top cover and painting it purple but leaving the front covers black

@cookie-hf5ww 3 месяца назад

what you do about the vvti solenoid oil line. isnt this the ge block

@Teysik 3 месяца назад

Yes. Buy a $50 line from drift motion that feeds the solenoid from the stock oil pressure sensor hole in the block. Then get an oil filter sandwich plate with an 1/8npt bung and put your pressure sensor there

@cookie-hf5ww 3 месяца назад

@@Teysik thanks makes sense . is motor going strong?

@Teysik 3 месяца назад

@@cookie-hf5ww absolutely. Watch some of my newer videos and you can see it in action

@cookie-hf5ww 3 месяца назад

@@Teysik sorry another question for turbo feed should i use the sandwich plate aswell? also does the non vvti have crank sensor?

@Teysik 3 месяца назад

@@cookie-hf5ww I actually can’t remember where my turbo feed comes from. Non vvti has cam and crank, but you’ll want to use the sensors and crank pulley from the vvti engine

@pleasure.jp. 3 года назад

u can never have too much purple. doooooooo it

@Teysik 3 года назад

😂 I’m really tempted

@alexismontealegre1845 2 года назад

You didnt replace the rods?

@Teysik 2 года назад

No sir, the rods in the non vvti ge can hold close to 700hp

@alexismontealegre1845 2 года назад

@@Teysik ohhh i thought you were going vvti ge block. Anyways, did you replace any bearings?. Ill be doing mine soon but not sure where or how to start. I have ge vvti engine and ge non vvti rods…. Problem with the rods is that im not sure if the caps matches the rods. I bought them used from someone

@Teysik 2 года назад

@@alexismontealegre1845 if I were replacing the rods I would do new bearings at the same time. I didn’t touch the non vvti bottom end. Just did valve seals on the head, new head gasket, and slapped it on. But I did clean the tops of the pistons first