Budget 2JZ Part 4: Accessories and Transmission 

I was researching NA-T builds and alternate transmissions for my 1994 NA Supra, and I came across your channel a while back, I have to say, I really appreciate the content. Especially this one. Most swaps are the cd009, like you said and that is starting to get out of my price range for a budget build.

love this series man

Excellent detailed breakdown of everything you did, well done and thanks, really helpful 👍🏽 You're the real hero 🙂

Let’s get some more videos! I’m loving this series!!

loved the series!

good to see back.. great video

Love the video and love the car!!!

this is the exact build that's been on my mind for a long time, good content brother, I'll probably do the exact same build, keep uploading these videos.

Incredible info mate! I have a 2jz-ge vvti that I’m going to rebuild and turbo and put in a 116d hatchback 1 series haha cheers for the info!! I’ll be following the process!!

Super interesting build! I have a 98 Z31 (3.0 VVTI) Automatic Soarer that I'll be going NA-T with once I'm stateside again. Keeping the automatic and having it built to handle power. Going for 450HP with high compression and low boost so I can work within the limitations of the stock oil system, and I'm essentially just upgrading to stronger rods and forged pistons. Been watching every NA-T conversion video and lurking every thread on the internet and your series was seriously helpful with the small stuff like the tools and bits that will be needed as well as showing every little piece coming apart so we can see the seals, etc. Appreciate you man! Sick, Sick build. You're taking the best of BMW and Toyota and putting them together amazingly, which BMW and Toyota couldn't manage themselves haha!

Love this project bro

great video👍🏽

love this ⭐

I saw your 2JZ GE comparison vid earlier this year. I knew I'd need another 2jz engine to build it right. Wasnt til months later on a whim went out of state. Got a non vvti decent mileage. Days before 2022 totaled the vvti daily. here I am watching your every step on your journey so that I can pull vvti head and everything to later build a beast!

I've been watching all of your videos. By any chance, would you make another engine like this, on sale? Either way, great content.

Can’t wait for the wiring and ecu. That’s the last piece of my puzzle

i would love to have all part list

not a lot of good budget 2jz info keep it up this was very helpfull. Ill be turbo'ing my factory manual sc300 in the coming months

Looks like a gs6-53dz, first and second are pretty short, hope your diff matches them well.

Yo thank god i found this everyone keeps telling me there barely any sapport for the zf trans and im a broke boy and was hoping to figure out how i can swap my lexus gs 300 to a manual with one of them and building my. Vvti out just like you did ima be warchin all your vids homie.

RAD industry makes a adapter to mount the gte top half of the intake to the ge bottom it's 250$ but its billet and rad dan makes quality stuff.

PRO TIP! Use red grease when putting seals in, will help a lot with install!! once installed, wipe excess grease.

Hello! Doing a manual swap transmission, i’ve read that some people used a bmw dual mass flywheel that just bolt into the 2jz but dont know if its true… can someone put some light on ? And for the tranny im using a e46 320d 6speed on my gs300 96’

Where can I get that intake manifold !!! 😃 awesome channel bro!!

We are waiting for new videos bro! 👍😃😃👍👍

It's crazy that I have an almost identical 2j build down to the purple valve cover

hello man nice videos i have a question what transmission exactly are u using , because i am going for a simillar buid , its a bmw zf from e36 m3 ? bmw zf from 225 ?

If you run across what driveshaft to use for an is300 with this transmission can you link it?

I’m trying to find that same trans but I don’t know a lot about them do you have like a code and model car it came in

Weld a aluminum tube that has a 90 plus weld the an fitting to the other end

Can I ask what motor mounts you have? And what the measurements between mounting holes. Thanks

What year bmw did you get the trans out of? Doing a gen coupe NA-T swap and am looking for affordable transmissions.

Hey dude what A/r housing your using for the turbo s366?

Will there be new videos man? Appreciate it

Please ask me. Is the connecting rod 2jz ge no vvti the same as the turbo?

Which head flows better? VVTI or non VVTI? Old Supra forums were no help so many biased opinions

What is the model number for your bmw transmission? Like what models carry it so I can yank one myself

What size throttle body you going with??

Can you share A link for your exhaust manifold??? Id love to purchase the same one. I'm currently doing the exact same thing as you. (inspired by you lol)

What zf transmission are you running?

you are not supposed to use the outside spacer on the flex plate. the website says so. I don't know if you caught this or not..

What other options did you look into for this build? And what car is this off of?

Would this transmission fit in a is300?

I think a problem I’m going to be running into is with the transmission. Since the short block is from a 94 gs300, it was used with the a340 transmission where as my current 1999 gs300 uses the six speed a650e trans. Being honest I do not know how to drive manual, so I was looking to stay automatic for now until I learn. Should I get the a340 4speed or would I be able to use the trans I already have? Upgrading it of course to handle more power. Not sure where to go at that point. If you might have an idea I’d love to hear it!

Do they still sell the adapter plate

Do you have a spread sheet with the costs?

What's the difference between an Amazon turbo kit and an Ebay turbo kit?

How much hp can a the is300 auto trans hold ?

Updates?

New video soon?

Midsump?

Hey man, I loved the video! I plan to build a 2jz na t mainly like yours and I had a some questions, so I was wondering if you had an instagram or something and was willing to answer a few? :)