Build the Star Trek Enterprise NCC-1701-D - Pack 1 - Stages 1 and 2 

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

Hurray! I was missing this build. It has it's problems but nevertheless it was my favourite of your builds. Was gutted when EagleMoss failed and it stopped. Glad you decided to start over Wayne!

Absolutely spot on Wayne I hope you have better luck with this Enterprise D build than the last. ⭐️⭐️⭐️⭐️⭐️

I'm loving this build, wished they did NCC1701A build. Great video from The World of Wayne very tutorial for beginners like me

Fellow Wayne here. Ordered my 1st pack and will be following this channel.

Glad you're starting over. Was loving the build before the problems.

Really happy to see you starting this back up. I held on to my original build, and resumed it as soon as it released from fanhome. I just finished adding issue 22 on Friday.

I am so happy to see you making this from start to finish following the magazine. It was your first run of this which introduced me to your amazing channel. Keep up the amazing work. Much Love.

So happy you are redoing this with Fanhome. Enjoyed getting to meet you at Wonderfest this summer. Keep up the good work.

Oh, man! I loved that Q special effect at the beginning! Thanks for that! Don’t stop with the special Q effects.

because of the rebuild... i am now ahead of you in one of these finally! all jokes aside i am looking forward to continuing and it's really awesome of you to start over for newer viewers. best of luck!

A very nice restart to this model. And with your previous model building skills you should be able to get a hopefully better build this time. Stay safe all.

Just ordered this kit/subscription. Will reference your videos. Glad you shared. 👍🏻

Thank you for stating up the Enterprise D build again.

I've received two shipments from the re-start from Fanhome, just finished Issue 15, finishing off the upper saucer and starting the lower side. Surprised the hell out of me when all the lights on the upper side lit up like they were supposed to! I'm doing the UV resin mod for the windows, looks MUCH better than the individual clear and black plastic windows.

glad to see u doing the enterprise again

Wow. That's going to be a big model. Look's brilliant too. I like!!

Good to see 👀👀 this back ,let's hope it gets finished👍👍

going to enjoy this build, missed the first one...

I remember watching your first release of these videos. And you been infront of myself by 10 magazine's. Irony I'm now 10 infront of you. But I still do love this ship despite its flaws. And can see the changes you have made in your presentation of the new version of videos.

awesome build

Glad 2 see this bk, good job m8

You know what would be awesome? Build the Jupiter Mining Corporation Red Dwarf!

Looks better than the last one

Seems like Fanhome replicated some issues that Eaglemoss had with their design, such as that grille on the topside of the command section, where there was a lit grille that doesn't exist on the ship (should be black like its opposing grille). I also see that in order to do an accurate build of the ship, you have to incorporate those mods from before, such as the clear dome over the bridge and using that defunct LED light from the grille to light it up. It's nice to see this model getting a redo, and I may have to re-subscribe to finish mine!

I am glad to be continuing this build, warts and all. however, I didn't get the corrected orange bussard part with issue 12 that people who were on that stage before fanhome took over got. so even though I wasnt going to paint anything, outside of blacking out some parts to fight light bleed, but now I think I may have to repaint those orange parts.

That’s a good idea using oil 😊

I love this eaglemoss set

I work in the aviation industry and our big problem is getting hard to get screws ( stripped out or nearly stripped) out of aircraft panels. We have a compound we use that's a bit on the expensive side. It can be used to install screws without stripping out the head of the screw, just put a little of this on the tip of your screwdriver and it creates an incredible grip no matter what type of screwdriver, even with the poor screwdriver that comes with this step. The paste is Clover compound Grade D - 180 grit. Been using it on my model build.

Well, Mr. Wayne, I thought you did a nice job of this first build, so please continue, until its all built? It is a very large kit, with all of the lights ... not sure how much yet, but just to have one of these! Bob from San Francisco, Ca USA

I have completely given up on my after... the unpleasantness... I think I damaged a panel beyond finishing and just feel so burned over the situation. So I am glad you are doing yours so I can see how it should all look in the end.

Decided to do this one despite all the issues you and others had. I noticed that you connected the blue/red wire for B to left vent but my instructions indicate to use yellow/green of B. Then you connected yellow/green of B to front left where mine says to use yellow/green of A wire.

I hate being a student and having no money...I want to build this so badly! I'll settle for watching your videos and pretending I'm building it until I win the lottery :P I hope this one goes well!

Thanks!

I got pack 22 Saturday just starting to put together lower portion of battle section

I miss the Q power effects. I know ypu want to build this basically stock but the painting you did on the warp nacelles was great.

I have to say I am impressed and if it wasn't for the fact I've run out of area space in my home. I would be very tempted to buy the one space I have is for the thunderbird 2 when I find one ready built as you know sadly the one you did is not available anymore but I will watch this. You never know I might win the lotto 😂😂😂😂😂😂😂😂

I just finished the stages had the same problem when I didn’t over tight.. couple of screws going round and round. I did use 1 cm that worked instead of ap..

The front end of the nacelle is called Bussard collecter.

I’m glad to see you starting from the beginning again. It was your channel that got me interested in building this particular model and staying to its original instead of drilling the holes and putting resin and all that so then I made my own channel to promote the build because I missed your videos, if you would like you can stop by my channel the Thompson model shop

So glad to see you starting this build (AGAIN). Glad they finally came back. Are you building from new packs or is this the old packs deconstructed? I think I saw the magazine still said Hero Collector, so that begs the question did Fan Home make any adjustments or corrections to the build (we know there were some coloring mistakes before with the nav light on the engine and the EM field piece)? Still think the individual windows are a bit silly. Don’t know why they didn’t do solid acrylic pieces like we had seen on the neck previously and here in the bridge section. I know the goal is to show how to build it “as intended” but I know you had made some pretty good progress on making the UV resin windows, and that seemed somewhat easier then the time consuming window placement. Was there any thought of going back to that method? Do you plan on customizing again as you go (the copper grills, beacon light, escape pod detail stickers, etc)? Anywho, great to see some Enterprise D. I look forward to this build and glad I caught up on the old videos once you provided them to me! Keep up the great work Wayne!

Hey Wayne, glad to see you starting over. I watched your first build and started it myself until EagleMoss stopped. I have picked up from where i left off with Fanhpme at stage 56. Just waiting for the subscription to start. Are you going to be using the lifeboat transfers on this build? good Luck! I'll be following along for an insider tips. I also started the Millennium Falcon build, 1st packs arrived last week.

I'm so happy to see you are building it again I can't believe they kept clear on one side are you not going to paint gray and side ports red

After getting about halfway through stage one I paused because I have 100% decided that I will be gluing plastic parts (windows and such). I just don't like how easy it is to push on the plastic pieces and make them move after they've been screwed in place.

Are you starting another "D"? I was able to pick-up, with Fanhome, where Eaglemoss left off. Helping Hands are an invaluable tool for working on small stuff. I get mine from Harbor Freight. These work great with my N-Scale trains (:160) 🙂

I was hoping fanhome was going to do some improvements to the model before re-releasing this build.

I'm having serious Deja vue here lol. I'll just bet you're looking forward to all of those pesky escape pods again. 😉

Glad to see this back after the problems you had with the previous. Are you doing it fully vanilla or putting on any mods?

Great video again!! Is this a complete do-over then? Not sure if I have mentioned this before during your old build is that I wish the windows were molded onto the reflector panel. After each saucer panel was completed and tested to determine if there is a light leak at the blackened windows. Still would put the individual escape hatches in as before. Are you still going to use Mike Lane’s accurate escape hatch transfers or vinyl stickers? Is the amber colored piece between the Bussard Collector and Warp Grilles the corrected piece? I am not sure what I should do with my Enterprise D build. The two battery compartments don’t work anymore, got a broken wire for the Nacelle and a cracked panel (original during the build and replacement). Think I may start over with it when I am either halfway or three quarters of the way through the BTTF DeLorean.

So did they pick up the design for the Eaglemoss model or is it a totally new one? You should do a comparison. Did you see my tweet to build a custom dry dock with the old unfinished model with the Enterprise under construction? I think that would be an awesome series.

Great to see the D back, but is this just a re-release from E.M? Did they fix up the light leaks and simplify the wiring monstrosity? Plus are you going to be doing your UV window mod? That was awesome and looked so much better on the other one! 😊

I wish this was available in Australia. Looks partly inaccurate but il would still get it. So I’ve decided to make that same ship out of lego :)

I'm really surprised you're building the Enterprise D again after last time.

Nice one Wayne, did they fix the light bleed problems?

Probably a good idea to make all first section videos, thinking, it is a persons first build.

still trying to find a model kit that more closely resembles the 4t studio model (in particular the deflector dish area) as used in filming the later series of the TNG episodes and the odyssey battle in ds9 where you see it more clearly. I haven't found a single model kit that accurately reproduces this.

With mine, when it comes to the individual windows I used clear super glue for the clear windows and black super glue for the black windows, it cut out most of the light bleed

Did you check the lights are in the right place, think you took one from the vent to the forward deck?

I cannot finish this build anymore due to my circumstances changing. If anyone in the comments wants to pick up where I left off I’d be more than happy to sell what I’ve got at a discounted price. I made it to stage 21 before they went out of business.

Will you also do the mods you have done to the previous Enterprise D like that blinking light on the bridge section, the copper paintjob on the nacelle grills or that transfer sheets for the escape pods?

Anyone else feel like its Groundhog Day? I feel like we've been here before... lol So far it doesnt look like they made any improvements to the model, either. Still an absolute mess of wires on PCBs.

Like video

Will you be continuing your modified build also? And will new builders be made aware of some of the problems we’ve encountered up until now (during the time it was an eaglemoss product)?

Hopefully you will have fewer or no problems with this huge kit? I have been following this kit for some time now ...

Surprised you didn't apply, or mention Mike Lanes Lifeboat transfers. And are you going to improve the lightning of the Nacelles?

is this worth a redo or continue from where we left off?

Wayne, to me its like you have done a time warp back in time starting this again. Will you be doing all the mods like you did on the other one?

Are the instructions on line. I have just decided to build the Enterprise. My first pack should be here soon.

It’s cool your restarting this with Fanhome now but what happened to the Enterprise that you was already doing?

I got the 200 ML size bottles as you suggested hope thats the right size ? And where did you get that cool shirt ?

This is a dream build of mine, I grew up watching the series with my dad and would love to do this, however I am a perfectionist and the raised edge on the top of the saucer section where it meets the Stardrive section is stopping me from subscribing to the build. Any thoughts on this, other than me being extremely picky lol.

Where did you get that Robbie the Robot I see on your bench? Is he still available? So very cool!

Do you still have your Eaglemoss one? How do you feel this compares, is there any difference, or are they basically the same? Or is it too early to tell? I know EM had some issues with things like seam gaps.

Wishing you the best of luck with this. You know how I feel about this thing. I see they didn't fix the vent that's not supposed to light up and they still have the wrong color of that band near the bussard collector which should be yellow not orange. I'm still curious how the saucer connects to the neck.

I thought you were doing your own build on this? Are you going by the magizines again now?

So does this mean you are not resuming your previous build of this when you originally started it, with your customisation of it as you were doing it? I've noticed the playlist for the previous Build the Ent-D model is gone.....?

Is this rebuild of the one you already started or the fanhome one from scratch Wayne?

It’s Groundhog Day at WOW! 😂

Can you point out the similarities and differences between this and the other Enterprise you were doing?

I was really hoping to see the continuation of your previous enterprise D not a complete do over

what oil do use to help the screws?

Wayne, is this a reboot of your Enterprise D project? If I recall, you were tried building this before. Am I correct?

sadly my country is not on the list of country fanhome is covering at least for the moment

So with you not going to carry on, to now taking it up again, along with build as is. Is the video backed by Fanhome? Meaning the known issues that definitely haven’t been addressed will just be there

A bit hard to get in Australia

Them windows put me off still

I’m confused, is FanHome picking up where Eaglemoss left off, or is this a totally new build?

What happened to your first build of the Enterprise-D? Weren't you modding it?

It’s Buzzard Collectors Wayne not Bozzard 😂😂

Why couldn't you continue the other build Wayne or is this a more superior model than the last one as it had flaws ?

I stop my subscription with Eaglemoss because of all the problems and the way over the top lighting light leaks has Fanhome made any changes to or is this just a continuation of the Eaglemoss build with the old Eaglemoss inventory

Hallo my Dear, do you upgrade this Lady too?

Is this the eaglemoss kit that evaporated into thin air a year or so ago?

I still fancy doing this but is £1300± really worth it so expensive

I was looking forward to seeing you carry on where you left off, not start again.

R u still building the other one Wayne

I thought you already built this?

What screw driver do you use for the Optimus prime?

honest question, why do you need oil?

How many issues is this? I can’t see from the website. It says each ‘package’ contains several stages but doesn’t say how many packages there are, unless I’m missing it. I went to the site and saw the millennium falcon is about to be released so…