Carbon Cub S2 Landing gear fix - alternative landing gear solution

Подписаться 1,2 тыс.

Просмотров 7 тыс.

50% 1

After many flights with the Horizon Hobby Carbon Cub S2 I realized the landing gear wasn't up to the job for my STOL attempts. Here is what I did to improve mine, utilizing the Valiant landing gear solution. It worked out well for me. Here I am showing you what I did. Perhaps it will inspire you, but no guarantees for anyone else :) Try at your own risk.
If you'd like to show your appreciation / assist the channel, you can buy me a coffee here :) www.buymeacoffee.com/captainl...
Links on my website
captainleo.aero
Buy 3D printed parts on Etsy :
www.etsy.com/shop/3drcplanes
If you'd like to show your appreciation / assist the channel, you can buy me a coffee here :)
www.buymeacoffee.com/captainl...
Part mentioned in video Landing Gear Set:
Valiant 1.3
EFL4955

Авто/Мото

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@anonymousasusual9413 4 месяца назад

Absolutely fantastic upgrade. I did this and it should have been how they did this from the start. One 1 thing… I didn’t have the stock landing gear guides broke. I also need them for my floats. So I cut a channel for the guides to fit through the new gear strut and it worked beautifully. Also added to a little structure, besides the screws to the modification. I really appreciate this video 👍it was a great help!!

@rogerhartzell544 Месяц назад

How much heavier is that aluminum bracket than the original metal rod? I ordered the bracket but it’s on back order and I have not gotten it yet. Was just wondering if it’s pretty lite or if it’s a heavier piece of aluminum?

@briank1671 9 месяцев назад

Great upgrade, I just bought this Cub for my grandson, I think I will do this before I give it to him.

@CaptainLeo 9 месяцев назад

Have fun! Lucky grandson :)

@boxlessthinker1973 3 месяца назад

My landing gear area has been a combination of hot glue and craft sticks for months. This is a much appreciated solution! (Think right wheel would tighten)

@waynebendelow282 9 месяцев назад

I got the part number from your video. Just needed a 2nd cup of coffee.

@deanedeane4318 9 месяцев назад

That is absolutely brilliant !!! Great job Captain Leo !!! Left wheel locks 😉😎

@CaptainLeo 9 месяцев назад

Thank you so much 😀

@mitchsouthern3815 8 месяцев назад

Thank you so much for the detailed video. Definitely going to do that mod on mine looks very impressive.!!!!!

@ArturdasNevesJulio 3 месяца назад

very nice update I just have buy the bat, holder

@CaptainLeo 3 месяца назад

Great, I see you got the one to fit the Gen 1 battery. It's printing now.

@ArturdasNevesJulio 2 месяца назад

today I have receved the Carbon Cub S2 Battery tray 3D Printed PLA+. verry fast xxx

@CaptainLeo 2 месяца назад

Happy to hear that, and I appreciate your feedback. :)

@candytrains Месяц назад

HI where is the part for the landing gear

@rogerhartzell544 Месяц назад

I am going to do the exact same thing on my Corbin cub S2, but I was going to put the 4 inch Kavon wheel using your inserts I was going to use a four MM stainless steel bolt so they work do you think they will be too heavy for the S2 cub

@weseehowcommiegoogleis3770 Месяц назад

front or back spin / Counter clock wise or Clockwise?? Cute.

@rogerhartzell544 Месяц назад

Do you think the Kavan wheels will be OK on the carbon cub S2 I went with the 4 inch and I also ordered your inserts and a battery tray from your webpage. I’m hoping the Kavan wheels are not too heavy for that plane. What are your thoughts?

@CaptainLeo Месяц назад

I only have the Kavan wheels on the FMS cub, the inserts are designed for that, they might work out on the carbon cub if you have bolts to fit. Let me know how it works out!

@AngelLopez-xg7wt 9 месяцев назад

Good video , my experience you need to run a rod thru the whole landing gear . It bend like that. Know 5 months with valiant 1.3 landing gears no problems. Also you may wanna, take the whole baterry compartment were landing gear goes take it out and glue with gorilla hot glue , it also come off after a few landings

@CaptainLeo 9 месяцев назад

Thanks for the tip! That's why I used stainless steel bolts and not mild steel ones. It seems to work well for me, however a stainless steel rod would probably be stronger than a bolt of the same size for sure.

@rogerhartzell544 3 месяца назад

I would think a straight rod going through. Both tires would be more prone to chopping down the grass. It would add a lot more drag to the plane in landing in grass and it would be more prone to nose tip just my opinion though where with no straight rod, the grass could pass through the tires a lot easier.

@rogerhartzell544 3 месяца назад

How much more weight would that add to the plane with the stainless steel bolts and the aluminum landing gear? It would be nice to see the difference in weight

@rogerhartzell544 2 месяца назад

Does it have the same stance as the original landing gear or is it sitting higher in the nose that’s going to make a big difference on landing and flying looks like it’s sitting higher in the nose than the factory landing gear. I just ordered the carbon cup S2 and I like the idea of doing this, but just have a few questions, does it sit higher in the front or does it have the same as the original?

@SteveKeeler 2 месяца назад

I dont see the part number anywhere. can you supply the number please. Thanks in advance.

@CaptainLeo 2 месяца назад

It's in the video description :) Valiant 1.3 EFL4955

@waynebendelow282 9 месяцев назад

Very nice modification! Can you provide information on the "Viper" part you used?

@AngelLopez-xg7wt 9 месяцев назад

It’s landing gear from valiant 1.3, it’s goons Bend like he did it you need to run a rod thru it the whole length, that’s how is in mine for 5 months know

@rogerhartzell544 Месяц назад

@CaptainLeo Месяц назад

Thats a very interesting customization! I don’t know what the weight difference would be, but the Carbon Cub can handle floats and a camera, so there is a good chance.

@danb.4571 8 месяцев назад

Very informative, and a nice upgrade. Obviously heavier than the stock wire gear. Did it change the CG of the plane much? Any different flight characteristics? Nice video, thanks.

@CaptainLeo 8 месяцев назад

I didn't notice any difference flying it. Originally the Carbon Cub came with a gps unit, now removed, and no longer shipped with the plane, so I wasn't concerned with the minimal extra weight. I didn't even need any trim change.

@danb.4571 8 месяцев назад

@@CaptainLeo Thank you, I will be doing this mod.

@CaptainLeo 8 месяцев назад

@@danb.4571 let me know how it works out 😆.

@BrGoBu Месяц назад

@@CaptainLeo Why did you remove the GPS?

@CaptainLeo Месяц назад

@@BrGoBu I have one cub with GPS and one without. I used it a few times to test it for fun, but in the end I never use it.

@victyber 9 месяцев назад

I turned on Closed Captions so that I can take a screen shot to find out the Viper landing gear. I use the Valiant landing gear for the Timber and other models. Is the Viper landing gear different than the Valiant landing gear? Thanks……Vic

@CaptainLeo 9 месяцев назад

Here is the part I am using : Landing Gear Set: Valiant 1.3 : Part number : EFL4955

@rogerhartzell544 Месяц назад

Does it sit the same as it did with the original landing gear or does it sit a bit higher in the nose now?

@CaptainLeo Месяц назад

Its almost the same, I didn’t notice a difference