Search “Honda NC750X Main Centre Stand Easy Install” exactly like that with centre spelled that way. It’s on “Nicks Episode” channel. So much better than the strength pull the spring back or the ratchet strap to the rim. It does require a bit of strength to align the stand to the holes for the shaft to get taped in but nothing like the strength required to pull the spring back with the stand installed full into position. Truly the single best way to install this.
Big thanks for the tip for fitting the spring. I was thinking how on earth to get this in place until i found your video👍👍 I used a thick steel wire instead of the shoestring. Now my Aprilia Tuareg 660 has a nice center stand.
I bought a Motion Pro Heavy Duty Spring Puller for $16. Mounted the stand on the bike first, then springs. The springs took about 10 seconds for the narrow one first, and then about 30 seconds for the second fat spring (it took me two pulls to get it hooked on). It's amazing what having the right tool for the job can do. 🙄
Many people who put on center stands only put on enough grease to warrant putting the stand down once a day or so. I think maybe you nailed the amount necessary to put the stand down 10k times a second.
