** NOTE: Bleeder torque is ONLY 3 foot lbs or 40 inch pounds!!! **
Also:
(1) Be VERY careful when loosening the clutch bleeder. If you apply too much force too quickly, you will snap off the head!
(2) The factory shop manual specifies a tightening torque of 40 inch-pounds which is just over 3 foot lbs. Don't over tighten or it could break next time you work on the clutch.
***
In this episode of Motorvate’s DIY Garage, we will show you how to change the clutch fluid on your 370z or G37 Sport.
Presented by spurgear.ca
Please subscribe!
22 авг 2024