Cheap Fix For The Most Expensive Weight Tree In The World

Подписаться 232 тыс.

Просмотров 34 тыс.

50% 1

Today we take a look at the money pit which is my Rogue Fitness Weight Tree. I keep sinking more money into this thing and it keeps getting better. However, there is one glaring issue which I wasn't able to address until recently.
Get the spacers here: bit.ly/3fglE1o
Get the weight tree here: bit.ly/2Pxboqo
Get Strength Co plates here: bit.ly/3cxxocU
Instagram: / basementbrandon
Getting new gear? Use the links and/or code BASEMENT below if my videos have helped:
Rogue Fitness: bit.ly/39gM0NA
Pioneer Belts/Wraps: bit.ly/3cRiTjJ
REP Fitness: bit.ly/3cHNXm2
Strength Co: bit.ly/3eCVEg2
Stoic: bit.ly/2ONiMgZ
Bells of Steel/StrongArm: bit.ly/3eyJS6u
BearFoot Athletics: bit.ly/3p2MZWc
LuXiaoJun: bit.ly/39LqVJR
Synergee: bit.ly/3qGa5CF
Titan Fitness: bit.ly/3cKyEsz
Got a home gym question, product idea, or want to work together?
Email me here: brandoncampbellfitness@gmail.com
0:00 Intro
0:31 Wheels
1:11 Barbell Storage
2:06 Change Plate Storage
2:34 Real Cost
3:30 Barbells
4:21 Mini Barbell
4:50 Humidity Sensor
5:05 Final Cost
5:39 Biggest Issue
6:00 Solution
6:45 Other Applications
8:10 Other Products
10:10 Scuffing and Closing Thoughts

Спорт

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 255

@randomOAS7 3 года назад

Here's a vote for what to do to prevent the powdercoat chipping off. I'm interested!

@BasementBrandon 3 года назад

Will see if I can dig through my dms

@reggiewery3610 3 года назад

I bought clear/transparent sticker paper and placed it over the post arms where the weights go. And my irons weight slide onto the post arms, no longer destroying the powder coat. It looks a little off, but it protects it!

@StonedRambo01 3 года назад

You change weight plates more than I change my undies

@BasementBrandon 3 года назад

I’m not sure which is worse here

@PBlaik 3 года назад

@@BasementBrandon after seemingly trying all available weight plate options I'd love to know your final recap.... if you were to do it again would you end up again with Strength Co. or would you go back to any of your prior choices? I know its a big question, but who else has tried them all!!!

@BasementBrandon 3 года назад

@@PBlaik I love the SC plates... but then again I also really liked a lot of the other plates I've owned. I will say I have no rergets about going from the shooters to these though.

@stewartvaldez4154 3 года назад

The Strength Co. plates look damn near perfect. I look forward to hearing about your thoughts on them. Thank you for the weight tree hacks!

@BasementBrandon 3 года назад

Thanks dude, hope to do that video next!

@bobqzzi 3 года назад

Your OCD attention to detail is awesome. I enjoy these reviews immensely.

@BasementBrandon 3 года назад

Thanks Bob!

@Fig_PNW 3 года назад

I like the new style of filming. Quick snap shots are working for you. Great job!!

@BasementBrandon 3 года назад

Thanks, I filmed it in one take first but it was too static/boring lol

@JohnSlaughter9000 3 года назад

EPIC video! Fantastic practical and fun ideas. Every BB video is excellent yet somehow he has exceeded himself. Well done, sir

@BasementBrandon 3 года назад

Thanks John

@michaelirani1053 3 года назад

Spacer idea is great! I was just at Lowes and bought a 2" black pvc coupler. Works perfectly!

@BasementBrandon 3 года назад

nice fix!

@JoshuaHMatos 3 года назад

Really appreciate all the gear reviews. Definitely keep these things in mind as I would like to build an epic home gym in the future.

@BasementBrandon 3 года назад

Thanks Jin and/or Josh.

@JoshuaHMatos 3 года назад

@@BasementBrandon :)

@troylapointe6288 3 года назад

Looking forward to seeing your reviee on the plates they look awesome. I orgered the rogue deep dish like a month ago . Waiting patiently ..

@BasementBrandon 3 года назад

will have it today more than likely.

@raymondsanders225 3 года назад

I was literally just thinking about several of these suggestions. Great post man

@BasementBrandon 3 года назад

I'm in yo head!

@brianj5770 3 года назад

I just got this tree last week. I also have a similar humidity sensor from the same company so now I have a good place to put it lol. Thanks!

@BasementBrandon 3 года назад

Haha awesome.

@mizouse02 3 года назад

I've been using my old amazon collars to put my plates further out on the sleeve so i don't smack them on the uprights anymore.

@BasementBrandon 3 года назад

Def a cheaper alternative if you have multiple pairs!

@brandonhoover2120 3 года назад

Why does the most expensive weight tree in the world need fixed 😂🤣 You crack me up fellow Brandon.

@BasementBrandon 3 года назад

that's what i'm sayin!!

@temptingfate759 3 года назад

Great video!!! I have that tree with the wheels but I was looking for a way to store a curl bar...space is an issue for me. Using that infinity holder bolted on solves my problem. Thanks!

@BasementBrandon 3 года назад

Just wish it was about half the price lol.

@ClintGoble86 3 года назад

Just used your discount code and got some caps for my safety spotter arms. Appreciate the link!

@BasementBrandon 3 года назад

Awesome thank you!

@ultimaetsolder 3 года назад

I have this tree. Bought it used, then bought 4 heavy duty casters, $25 each. I also upgraded to stainless steel washers - beautiful shine. Love it.

@BasementBrandon 3 года назад

Sounds great!

@moisesojeda5647 2 года назад

Link for heavy duty casters?

@ultimaetsolder 2 года назад

@@moisesojeda5647 local supply store. You need the type with the centre single threaded rod, which is less common in heavy duty situations.

@KevinBrowder 3 года назад

ooooh so many more ideas for my Voron 3d printer. Been using some printed PETG plate wedges for a while and they work great

@BasementBrandon 3 года назад

Lots of gym hacks you can do with that thing!

@kozmo7 3 года назад

Hey Brandon, definitely interested in seeing how to better protect or replace the weight tree arms. I live, unfortunately, in humid ass Florida so I’m very concerned of the powder coat wearing away and rusting the metal underneath.

@BasementBrandon 3 года назад

gotcha!

@mdjak3686 3 года назад

Nice Brandon. Just used that code for the spotter arm protector ends. Ty.

@BasementBrandon 3 года назад

No problem!

@vicsophios5892 3 года назад

Sure the extras such as barbell holders, spacers, wheels etc add up but you are getting full 'bang for buck' for getting the most out of it and for me the most important part is the amount of space you save by not having to mount a gun rack to store barbells. Who knows maybe Rogue will update this weight tree to include some of the extras you have mentioned at a reduced price instead of having to buy them as add ons. Good video Brandon thanks.

@BasementBrandon 3 года назад

Thanks Vic!

@ketoketoketo 3 года назад

Thanks for the spacers link. Just added 4 infinity pegs to the Bottom H. You're awesome. Ordered before I saw your promo code.

@BasementBrandon 3 года назад

Oh one upping me...

@ketoketoketo 3 года назад

@@BasementBrandon would a matador light fit with room for the plates?

@BasementBrandon 3 года назад

@@ketoketoketo don't believe so.

@overandover4783 3 года назад

Just a thought. You can make DIY spacers easy if you don’t care about the color by buying the cheapest length of 2” pvc pipe at your local hardware store and a few minutes with a hacksaw and sandpaper and you’re done. Well under a couple bucks and takes maybe an hour including an average trip to the hardware store. If you do want color you can always paint them or wrap with colored electrical tape too.

@SirSketchable 3 года назад

Could probably a nice black rubber gasket for plumbing that would give you a bumper backstop for the plate

@BasementBrandon 3 года назад

Ah I’m sure there are cheaper and maybe even easier options! Good tips

@the_grinch_life1187 11 месяцев назад

First off, great video. I went to Aperture and dropped some $$ mid video. Any thoughts on caster swap outs to work better on the stall mats? That’s my only issue, I occasionally want to move the tree a little and they don’t move well. And I don’t have even close to the amount of weight you do.

@BasementBrandon 11 месяцев назад

Some have mentioned it may help, but I've found none of them work great for me when you have a loaded down tree on stall mats due to the compression.

@jamestonbellajo 3 года назад

Hey Brandon. For the spacers, you go with 30mm for the bottom rung? What did you pick for the top and what’s the measurement for the custom ones in the middle? Thanks!

@BasementBrandon 3 года назад

I just went with the standard size that Greg lists on his site for Rogue for the top and bottom rungs. For the middle I went 2".

@reginaldchesterfield8110 3 года назад

I like the new video transitions ha ha, it just feels like a higher production quality LOL

@BasementBrandon 3 года назад

Need to catch up to coop

@reginaldchesterfield8110 3 года назад

@@BasementBrandon ha! Everyone has their own style. Youre more “Campbell Fitness” AND gym equipment review. You actually use your stuff. He’s just reviewing (or so it seems haha). Besides, thats his day time job, we still have our 9-5s haha.

@maclindsay8803 3 года назад

Hey Brandon, made my "quarantine basement" home gym a few weeks ago after watching almost all your videos. I was curious what you thought of your peloton in the corner? Thanks!

@BasementBrandon 3 года назад

I love it. A bit too much TBH, but have found a nice balance where it doesn't impede my training.

@briando6193 3 года назад

Would like to see a video of what you have seen people do with the powder coated sleeves that eventually gets chipped off. Parts of the powder coat on my sleeves eventually chipped off after a few months of using the rogue weight trees. I have the rogue calibrated plates

@BasementBrandon 3 года назад

I'll see if I can get something together at some point

@rayjbb1494 Год назад

Would you be able to use the barbell storage holders for trap bars or safety squat bars?

@BasementBrandon Год назад

Depends on bar. Obviously where the handles and things end up may need to be shifted to avoid hitting weight plates.

@candleankle1805 3 года назад

Brandon, what’s ur deadlift platform flooring? Stall mats on top of wood? The rogue squares?....was wondering because it looks so flush with the frame. I’ve done wood under stall mats and the rogue squares, also done without wood. Was never able to get my platform looking smooth like yours

@BasementBrandon 3 года назад

wood between slats and then just the 1.5" squares!

@GeorgeZimmermen 3 года назад

Got my kabuki kadillac bar about 3 weeks ago. Pretty sweet. Waited 3 months for it

@BasementBrandon 3 года назад

Yeah their lead times are bonkers!

@DanesinTexas 3 года назад

Love the 3D spacers of different sizes 👌👌👌

@BasementBrandon 3 года назад

Lots of good uses!

@LuisVega-iz1zd 3 года назад

@@BasementBrandon the homie already said lol, thanks for the 3D spacers I was just thinking what I could do to fix that.

@phuturephred 3 года назад

What size were the one you got for the middle, the ones to allow the change plates to fit. I want to order some while the code is still good.

@BasementBrandon 3 года назад

Hmm I don't recall off hand. What I did was set up the weights where I wanted them and then just measured the distance.

@mrdreyco6527 Год назад

What size spacers did you get for the bottom and middle row ?

@BasementBrandon Год назад

40mm. If you look at the product page FAQs it talks about sizing suggested which was not there when I made this video.

@ascendedvegeta 3 года назад

As I'm watching the part of the vid when you showed the adjustable dumbell it popped in my head, have you come across any dumbells or barbells that have a screw style securing system on the inside of the sleeves of the bar rather than on the outside or having to waste a couple inches at the end of each side for a lock jaw type or spring type collar? I hope all that makes sense. Conversely, let me know if you think that wouldn't be a good idea for a bar

@BasementBrandon 3 года назад

There are several, most notably IronMaster, Pepin, and BaadAss.

@briando6193 3 года назад

Also was it the single rogue infinity plate storage for $28 that you purchased for your change plates?

@BasementBrandon 3 года назад

It's called bolt on double change plate storage. But you could do the single if you want.

@strawberryyogurt0 3 года назад

@2:45 - Unrelated to the topic but more of a curiosity (because I’ve decided to start back from square one for my front squat [no rack to do back squat] and sumo deadlift to fix my form so my torso angle remains the same from start to end) ... have you always squatted using the same form where the hip drives up while your torso starts to leans over ... because it sort of looks like a mini-semi-good morning squat?

@BasementBrandon 3 года назад

Low bar squats will have a less vertical torso angle due to the placement of the bar and mechanics needed to keep the weight over the mid-foot.

@strawberryyogurt0 3 года назад

@@BasementBrandon ... I do realize that low bar squats have a less vertical angle, and maybe it’s just me, but I think having the hips and shoulders rise at the same time "might" be "better" even for low bar squats. @2:45 point, it looks like your hips shoots up first, causing your torso to dip downwards. Anyways, you’ve got more in the bar than I’ll ever lift in the squat, so you’re doing something right.

@BasementBrandon 3 года назад

@@strawberryyogurt0 I'm not worried about it TBH, I learned a long time ago that hyperfocusing on some of the minutiae of form does more harm than good. Nothing here that's putting me at risk of being hurt or impeding my progress.

@rysharp1286 3 года назад

Any reason you did not get the rouge deep dish plates? They seem to be the go to Made in USA iron plates.

@BasementBrandon 3 года назад

the 45s are almost 2" wide (1.97"), not very practical IMO. Strength CO are 1.25". I'll talk about it in my plate video.

@brianjerszynski1338 2 года назад

Any idea which Titan Fitness barbell holders are comparable to the Rogue ones?

@BasementBrandon 2 года назад

The t3/x3 ones

@brianjerszynski1338 2 года назад

@@BasementBrandon thanks man! Keep up the great work with the content.

@kadijaish 3 года назад

Hey Brandon, did you ever had issues with spine discs bulge/herniation and if you did can you address that in a video? Thanks

@BasementBrandon 3 года назад

I have bone spurs on my lower spine that limit my mobility

@popeil51 3 года назад

I have the Rogue deep dish plates and the powder coating is getting beat to hell. Would UHMW tape be a solution here?

@BasementBrandon 3 года назад

You could def do that!

@jasonlanpher9397 3 года назад

Brandon, would you share the length you chose for each spacer?

@BasementBrandon 3 года назад

Shoot me an email or a DM and I'll remember to go measure.

@Simon-zu2rb 2 года назад

Where did you get that dumbbell holder?

@BasementBrandon 2 года назад

It's called the barbell butler I believe.

@nickgomes2901 3 года назад

I got the Bells of Steel plate tree, that thing is a monster, comes with 4 bar holders, wheels and was ~$350 CAD shipped.

@BasementBrandon 3 года назад

Nice!

@joeyhitchcock5550 2 года назад

How sturdy is this? Does it sway back and forth at all?

@BasementBrandon 2 года назад

No, it's a tank!

@dannybosch7756 3 года назад

Great video! Do you or anyone in the comments have a favorite j cup for a 3x3 1in rack? Been looking around and can’t really find a comprehensive review on them compared to each other. Right now I’m between the rep sandwich, rogue j cups, and ghost roller 2.0. Any opinions would be greatly appreciated!

@BasementBrandon 3 года назад

Out of those listed I end up using my 1" sandwich cups the most for a lot of things.

@dannybosch7756 3 года назад

@@BasementBrandon appreciate the reply

@jasonburns6411 3 года назад

What MM width did you go with on the spacers?

@BasementBrandon 3 года назад

I went with mostly the standard ones for Rogue (1.9")

@brycem3010 2 года назад

The chalk bowl Is back in stock and dose it fit on it weight tree

@BasementBrandon 2 года назад

They only have the monster version available now, which won't work as is on this tree.

@angelbaez6751 2 года назад

I’m looking for a weight tree but not sure if I need the wheels

@BasementBrandon 2 года назад

I never used mine, but it was nice it lifted the weights up higher.

@Michael_Elias 3 года назад

Where do you sell your old plates? Local looking to upgrade my fitness gear set!

@BasementBrandon 3 года назад

FB marketplace usually

@Michael_Elias 3 года назад

@@BasementBrandon I’ll keep an eye out for them

@calvinchen6326 3 года назад

how about when the storage pegs scratching the paint finish of calibrated plates?

@BasementBrandon 3 года назад

unless you have like a urethane pin it's pretty much inevitable... like Thanos.

@calvinchen6326 3 года назад

@@BasementBrandon oh cuz I thinking of using UHMW tape or scotch tape to prevent it

@reginaldchesterfield8110 3 года назад

Well i got to the end of the video and yes, i would like to see the inventive things people are doing to protect the powdercoat hahahahhah

@BasementBrandon 3 года назад

I’ll have to dig through my dms

@JakeVasapolli 3 года назад

Video coming on those dumbbell handles?

@BasementBrandon 3 года назад

Maybe. I only have one lol

@MrJkillahoe415 3 года назад

How much did you get the kabuki bar for? Found one in market place but they’re asking $575

@BasementBrandon 3 года назад

I bought mine for $475.

@MrJkillahoe415 3 года назад

@@BasementBrandon thanks!

@drethebarber 3 года назад

Is possible for you to do a video of the Rep I'm no rack or the PR 5000 with the Rogue trolley 50 Cal. ISO arms? Showing the compatibility and the fit onto the PR’s uprights.also maybe a hack to get them to fit a little bit more snug.

@BasementBrandon 3 года назад

I don't have them :(

@drethebarber 3 года назад

@@BasementBrandon the Rogue 50 Cal lever arms came and they fit good there is a little bit of a wobble but nothing serious. I'm happy with my purchase. Thank you for your videos I watch them a lot.

@BasementBrandon 3 года назад

Thanks for the feedback. I get asked this a lot!

@roymclean4763 3 года назад

Love this but would find all plates lying on the floor everyone I took my turn in the family gym 🤣😅

@BasementBrandon 3 года назад

Lol

@80yr.oldpowerlifter 3 года назад

I need one of these really bad. All my plates are on the floor. Stimulus check here we go.

@BasementBrandon 3 года назад

Might have to pool a few together for this bad boy

@CVNTGETENOUGH 3 года назад

Aesthetics is extremely important!

@BasementBrandon 3 года назад

agreed

@Brian-kl9tc 3 года назад

Dang is it really that hard to move with wheels? Kinda sucks, was hoping to be able to roll it around a bit. The reviews on the tree on the rogue website definitely made it seem like it'd roll around better. Guess I may have to rethink my layout a bit once my tree finally arrives.

@BasementBrandon 3 года назад

If it's on mats it's tough with the stock wheels, but you might be able to swap for beefier ones. if you're on concrete it will be easier to move regardless.

@ryanttorres3071 3 года назад

Why didn’t you go for the rogue deep dish plates?

@gimmethatcake 3 года назад

I wondered the same thing 🤔

@BasementBrandon 3 года назад

I'll cover this in the video, but the 45s are almost 3/4" wider per plate than the StrengthCo. Not a fan.

@reginaldchesterfield8110 3 года назад

Hey Brandon, what humidity level do you try to keep it at? And what do you use to control the humidity? I bought a dehumidifier from Costco, just curious about your method.

@BasementBrandon 3 года назад

That’s where I got mine! I set it to manual and usually put it anywhere from 50-65%. It does a great job.

@rockman7503 3 года назад

Can't weight to see the strength co plates review!

@BasementBrandon 3 года назад

Hoping to do it next week!

@MeepMeep88 3 года назад

They should have chromed the pegs so it's slippier and easy to put on/off.. Like a barbell

@BasementBrandon 3 года назад

I have some other pegs that are smoother and I don’t like how easy the plates come off tbh. Always feel like I’m gonna drop one on my toe lol

@Rocket4ce 3 года назад

Just bookmarked that website. Looks legit.

@BasementBrandon 3 года назад

Lot of nice hacks.

@OldStyle2005 3 года назад

I heard kids playing in the background of the video, thought it was my kids at first when watching this 😂

@BasementBrandon 3 года назад

Man I had to use some different takes b/c they were going ham upstairs right before nap time lol.

@MrJaycobsen 3 года назад

You could change the bolt or cut it also

@BasementBrandon 3 года назад

Def could but that wouldn't help with the other 2 tiers!

@kevinjackson4192 3 года назад

Is that a roobox plyo box? I just order one.

@BasementBrandon 3 года назад

Good eye.

@KonCity22 3 года назад

Do you have the link to that 3d printed piece?

@BasementBrandon 3 года назад

in description!

@KonCity22 3 года назад

@@BasementBrandon they must be out of the ones that hold the barbell to clean it bc i am not seeing it

@BasementBrandon 3 года назад

@@KonCity22 ah that's from a different company

@PaceWC 3 года назад

Time to make it even more expensive and put some larger turf wheels on it!

@BasementBrandon 3 года назад

Just put some skis and make it a sled

@Zx2Nick 3 года назад

Why didn't you just buy a shorter bolt?

@BasementBrandon 3 года назад

You could do that, but would still want the spacers for the other uses.

@hankutah6716 3 года назад

I've got limited space and attached a landmine to mine. It fits(if you use wheels)

@BasementBrandon 3 года назад

nice!!!

@AnonymousHippo5 3 года назад

Why not chrome the plate horns?

@BasementBrandon 3 года назад

Don't like the look

@richards6431 3 года назад

Hmm, i just checked the Strength Co. Website, they don't sell 35s...I assume Brandon got a pair or two of pre-release plates lol.

@BasementBrandon 3 года назад

Rogue deep dish 35s 😂

@maxmil2224 3 года назад

Great video as always. When reviewing the kaddy, could you show re-racking on both the rep and the rogue racks to show the amount of clearance between the kaddy and the uprights? I know it's tight, but would love to see the clearance on the tighter rep rack. Thanks!

@BasementBrandon 3 года назад

That's a good idea. I hope I remember lol.

@benbarnett1076 3 года назад

If we’re counting the plates it’s holding efren’s weight tree is hard to beat lol

@BasementBrandon 3 года назад

This is true. He has more 35s than I do as well.

@calebmccabe5326 3 года назад

Why not have have the pegs with a 1" diameter so your plates go on and off easier? I'm always annoyed at gyms when weights are hard to get on and off the tree when theirs no reason for it

@BasementBrandon 3 года назад

No one likes a big sloppy hole with a small peg in it :)

@jordansjone5507 3 года назад

Humidity sensor, to keep from upkeep, even though I just continually sell the old and buy new equipment, lol :-)

@BasementBrandon 3 года назад

Stuff sells for more when it's in better shape!!

@jordansjone5507 3 года назад

@@BasementBrandon What is the longest time you have kept a power rack?

@BasementBrandon 3 года назад

@@jordansjone5507 I've only had 2 main racks in the 6 years I've had a home gym. I only sold the first one b/c I was moving and it wouldn't have fit. So I'd say 4.5 years?

@raveevar7836 3 года назад

Are you going to do a review on your rep plates? FIFO my friend.

@BasementBrandon 3 года назад

I've been thinking I'd do an update to the first impressions video I did on them.

@raveevar7836 3 года назад

@@BasementBrandon yeah I would glady appreciate it! I want to get them. I would rather get the rogue six shooters urethane version but they are never in stock.

@CaptCanuck4444 3 года назад

Eleiko: Hold my champagne.

@BasementBrandon 3 года назад

true

@gregors00 3 года назад

Do I spy a Kaddilac bar? Did I miss a review on this little scamp or is there one on the way?

@gregors00 3 года назад

That’s what I get for commenting before the video is finished haha

@gregors00 3 года назад

Oh and you fuckin got me with the late “woooo”…. I thought it was gone haha

@BasementBrandon 3 года назад

Hah yes that and transformer on the way

@Gnoll-1337 11 месяцев назад

Brandon has never heard of oak club if he thinks this is the most expensive weight tree 😂

@BasementBrandon 11 месяцев назад

Check out my custom Ghost weight tree I have now... 1 of 1 😅

@Gnoll-1337 11 месяцев назад

@@BasementBrandon very jealous!!! I don’t know what that set you back but I think you can hit 2k with the oak club tree pretty easily with some add one and shipping 😂. I’m looking for some type of bumper plate storage solution but cannot find anything on the market that appeals to me.Ghost used to have a bumper storage rack which would be perfect, but it looks like rogue discontinued it 😢.

@GarageGym411 3 года назад

A-PEX... A-PEX... A-PEX... SOR-I-NEX... A-PEX... A-PEX... A-PEX... SOR-I-NEX... Seriously, though - when you gonna put some 'outriggers' on your 6-post Monster rack and create some APEX-like plate storage? That's my plan for my Rogue RML-490c - first turn it into a RML-690c then add 'outriggers' employing 2 addt'l 90" uprights and 4, 24" crossmembers - I'll put the plate storage posts on those 2 'outer' uprights (unlike the Sorinex Apex rack design that dedicates a crossmember FOR EACH plate post!) It doesn't get more convenient than having the plates right there on each side of the power rack. Am I right? Eh? Eh? I loved my 4 Hammer Strength Plate Trees, but they were sold once I decided to place plate storage on each side of my rack, against the wall.

@BasementBrandon 3 года назад

I don't think I'd like that tbh

@Bearded360 3 года назад

That’s quadzilla!

@BasementBrandon 3 года назад

Just a good angle with a wide lens. Camera tricks lol

@Bearded360 3 года назад

Or your freaking quads are swole!

@bmstylee 3 года назад

Actually the best way to avoid smacking your plates into the rack is to clean up your walkout.

@BasementBrandon 3 года назад

You know what I actually mentioned that in another take but couldn’t use it bc my kids were screaming bloody murder lol

@SimonLi 3 года назад

It rude I sold my wheels cuz I couldn’t move it at all with the weights and it just made the tree taller than I needed it to be 🥲

@BasementBrandon 3 года назад

Haha taller the better! Less bending over!

@markhalstead2386 3 года назад

@@BasementBrandon Do you mean squatting down?

@BasementBrandon 3 года назад

I don’t know anyone that squats down to get plates off a tree tbh

@markhalstead2386 3 года назад

@@BasementBrandon I squat for lower weights as it is better on the back.

@a.f.s.3004 3 года назад

If the wheels were larger in diameter....that rack would cruise over the stall mats. The wheels are way too small

@BasementBrandon 3 года назад

Could be!

@fiftyfiftyone 2 года назад

Just buy some pvc or abs pipe for spacers

@BasementBrandon 2 года назад

Could go that route

@satinderjit4 3 года назад

$880 for a weight tree? Hell no

@BasementBrandon 3 года назад

180

@RogueCylon Год назад

The base tree is $255 now, and wheels are $25.

@BasementBrandon Год назад

Right on

@adammontoya8329 3 года назад

Why did I just watch this whole video...damn you Brandon and your silky smooth voice!

@BasementBrandon 3 года назад

ooooooh yeah

@CaliGhost 2 года назад

This weight tree went to $220 in 2022 without the $25 wheels add on, pain

@BasementBrandon 2 года назад

@ArcticAstrophysics 2 года назад

$9 for wheels? The tree is $220 now with $25 extra for wheels!

@BasementBrandon 2 года назад

Times they are a changin!

@ArcticAstrophysics 2 года назад

@@BasementBrandon 4 months of research and planning, finally bit the bullet and bought a rogue gym, your videos helped on a lot of my decisions thank you

@BasementBrandon 2 года назад

@@ArcticAstrophysics Congrats!

@user-hb1ve6mc6f 3 года назад

@idw85 3 года назад

Guys I just bought this weight tree! Now....Just need to buy...weights, bench , rack, dumbells, bars, bands, platform,...overall a entire gym. But the empty rack looks great! Lol (joke)

@BasementBrandon 3 года назад

It's a good start :)

@antoninb.6735 3 года назад

The BULL plate tree is above 600$

@BasementBrandon 3 года назад

Nice.

@BW-pw4rl 3 года назад

sooooo....where's the transformer?

@BasementBrandon 3 года назад

Should be here next week!

@pawadventures5544 3 года назад

White, the plainest color is the proudest uniform. 🤣 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5dD9xdNIS2o.html Good tip/lead on the Aperture spacers. 👍🏻

@g.thandi824 3 года назад

maaaan, you gave up the 35's - a new era.

@BasementBrandon 3 года назад

They’re on there too ;)

@g.thandi824 3 года назад

@@BasementBrandon ah, I thought I saw them in the video, and then checked their site, but didn’t see them - the man has the hookup! Excellent. I ordered revolvers, with 35’s, which for some reason offends many people lol. Anyway, looking forward to your review - your new plates are beauties.