CHEAP Transfercase Mod!! Jeep T-case In A Chevy. OnX Offroad Build Challenge Part: 6

Подписаться 564 тыс.

Просмотров 89 тыс.

50% 1

We have shown you how to rebuild NP 231 transfer cases before but we haven't shown you that you can double them up to get the cheapest low range gear set of any t-case. At the time of this video the doubler kit cost $485 and the install isn't very challenging. This DIY video should make your gears spin.
Rad Snap Ring Pliers: amzn.to/3WSjYP9
Doubler Kit: froehlichsuspension-com.3dcar...
Don't forget to vote for us:
www.onxmaps.com/offroad/app/b...
*********************************
Like this video? Check out these:
ONX Build Challenge Part 1: • The Vehicle You Never ...
ONX Build Challenge Part 2: • Did we BUY THE RIGHT T...
ONX Build Challenge Part 3: • How To Build A Junkyar...
ONX Build Challenge Part 4: • Jeep Suspension On A C...
ONX Build Challenge Part 5: • Steering and Wheel SEC...
*ONX Build Challenge Part 6: • CHEAP Transfercase Mod...
ONX Build Challenge Part 7: • IT ROLLS!!!! Rear Susp...
ONX Build Challenge Part 8: • Matt Shows Up to Help ...
ONX Build Challenge Part 9: • HELP!!! It's Going Ou...
ONX Build Challenge Part 10: • Just Call Me Bob! How-...
ONX Build Challenge Part 11: • Bend & Flex. We Build...
ONX Build Challenge Part 12: • Is This The End Of The...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discou...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RU-vid: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Авто/Мото

Опубликовано:

2 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 271

@rusallen7 Год назад

Best off-road content on the internet. I feel like this was a video version of an old pirate 4x4 thread. Don’t ever stop.

@jackc6299 Год назад

Your knowledge of all these old school/alternative/pirate way to make an offroader is impressive! I cant wait to see how this S10 performs. I watch Rudy and Holly and they seem like they are winging it. But axles and suspension might be all that Ram needs. The Dumpster Fire guy is doing a lot of body work, and relying on mostly stock running gear. Great work!

@jimsdimideas5383 Год назад

Thank you for taking the time to explain your thought process with the shackle reversal scenario for the YJ front springs

@colbysheppard3682 Год назад

Really love the cheap Jeep/ off-road stuff! Learning a ton and good to see ways to keep it cheap! Your knowledge of 4x4 stuff is immense! Keep it up Colt love the channel so much

@darrenchamp8832 Год назад

Don’t forget you also get a 2wd single low option with this setup! Awesome stuff!

@rickbown6871 Год назад

Thank you Colt for this step by step how to. You really bring great content to Bleepin Jeep!

@richardnichols1532 Год назад

That was awesome. The 4 pinion planetary already has the holes, you could make your own 6. It was a fun project for me and my son.

@AndrewAMartin Год назад

It looked like the carrier was the same for all 3 configurations -- makes sense.

@richardnichols1532 Год назад

@Andrew Martin there's a how to video. It was intimidating at first but we successfully made a 3 pinion into a pinion🤘💪

@dirtyfingersgarage Год назад

Great video Colt. I have to take apart my 231 and some of the pointers you show help even the more skilled tech's Cheers and good luck in the challenge.

@thisisatest2576 Год назад

Just a suggestion - put the 6-pinion planet in the rear 231J t-case - it can see 2.72x the torque that it normally would from the output of the front doubler when the front doubler section is in low. The front doubler should be fine with the OE planet gears as it should be designed to hold the torque output of the 4.3L-700R4. Not that putting a 6 pinon planet in the front doubler is a bad idea but if you are on a budget and only have access to (1) 6-pinion planet set... If you need extra 6 pinion planet sets, NP241C/243C cases are a good source and cheap at a u-pull if you pull the gears out of it at the yard... If you are into the 231J rear case you can upgrade the chain and drive gears to the wider chain and drive gears found in NP231D (Dodge truck) t-cases.

@KC-7mm 11 месяцев назад

Would it be just as easy to run the dodge 231 t case and the source a 6 gear planetary to put your stock 231 in front of it or is it not compatible im just curious you seem to have knowledge and I’m trying to learn. I might be doing something similar soon on a build

@thisisatest2576 11 месяцев назад

@@KC-7mm The 231D has a few advantages over the 231J: It has the wide chain and sprockets (same width as the 241/243 cases, 1-1/4" width vs. 1" on the 231J IIRC), the two 231Ds that I have had apart also used a double roller bearing on the input gear. I've had several 231Js apart and you only get the single roller bearing on the input gear. The 231D also has a 32 spline slip yoke for the rear output, the 231J is 27spline? slip yoke OEM. Maybe not as important as a slip yoke eliminator is the better option than retaining the slip yoke, but if your on a budget... The 231Ds I've had apart also have steel retainer for the spring loaded shift rail that rests on the back half of the case, this prevents the spring from eating into the back case half over time, haven't seen this feature in the 231J. Makes sense, a fullsize 1/2 ton truck that came with a 5.9L V8 probably needs a heavier duty tcase than a 4.0L Cherokee... When swapping in a 6-pinion planet gear from say a 241/243C keep in mind that sometime in '94 (I think) the sun, planet and ring gear cut was changed so that the gear tooth profile was less square and more "pointy". So use a 6-pinion planet from a year range that matches your 231. The old vs. new gear cuts will physically assemble if mixed but it will make bunch of metal shavings in your case and probably ruin it. There are different length input gear stickouts as well, don't remember all the details now... 231J 23 spline input gears varied based on whether the tcase was behind an AX15, NV3550 and the AW automatic, there may be other variations as well. Not sure if the 231D cases used different length 23 spline input gears, but I ran a 231D input gear in a 231J behind an AX15, then changed it to the longer 23 spline input gear when I moved to an NV3550 (took the input gear from the donor Liberty 231J) in the Comanche I used to have.

@sherylryan7038 Год назад

Probably one of the best technical demo I have watched excellent 👍 👌 👏 😀 😎 🙌 from Australia 🇦🇺

@timoldenburg2249 Год назад

You seem like such a chill guy, love your attitude 👍🤘

@theslab6441 Год назад

This was the best episode so far. Very interesting and a product that most of us are considering on a Bucket List 4x4

@thephilosopher13 Год назад

Watching you move the welder off the trailer… “oh, 4 wheels and stuck? Rock it!” 😂 solid. 💯

@treywilliams755 Год назад

Colt just wanted to say you are without a doubt one of the best teachers on RU-vid. Legit MVP of bleepinjeep i always learn something watching you build.

@bleepinjeep Год назад

Thank you Trey!

@marklowe330 Год назад

I bought and installed the D&D kit 12 years ago. Great upgrade for my XJ. 4.0, auto, dual 231's, front 3 link, rear 4 link, 60's, 5.13's, locked, with 40's. High steer with hydro assist. Front and rear 8000 lb winches.

@1a1u0g9t4s2u Год назад

Without a doubt learning more about the T-case than I will ever use. Glad you are doing this. Thanks for sharing.

@cameron339 Год назад

Colt, as a fellow South Dakotan thanks for creating all this great content! I love seeing the Black Hills in the background of your videos!

@snowfreak207 9 месяцев назад

The way you explain everything is great man. Got me on marketplace looking for something to build on the cheap.

@King_Bob_The_Third Год назад

I think your friend got fed up with you coming around using his stuff so he sold you a welder. 🤣🤣🤣 And each time I see those wheels you painted they look like they were anodised, really nice job. Really looking forward to seeing the finished product and I am sure that you are to.

@cadilakisrodcustom Год назад

Thank you Colt for keeping this channel alive.. the content here is wonderful! I've done a bunch of mods to my xj that I learned here.

@jefferyhuffman8282 Год назад

Yes on tig welding lessons and great video!

@Crewsy Год назад

So does the fact that he sold you an old TIG welder mean the same as he doesn’t want you to come around anymore? 😉 Loved this episode. Definitely more of a how to than a let’s see if this works type of build. 👍🏻👍🏻👍🏻

@northpeak4x4 Год назад

Good old D and D machine. They were hard to get a hold of. But my doubler I bought in 2006 is still going strong in my Ford Ranger.

@userANAKIN Год назад

Hearing all the bad customer service stories kept me away for so long. Now that D&D has a new owner I might just give them a shot.

@DuanDao 11 месяцев назад

I dont even own a JEEP (own a 100 series LC) but really enjoy the explanation that you do that makes this pleb understand.

@muddiver91 Год назад

Love the channel, yes please on the tig video.

@jamescarroll1224 Год назад

Yes on the Tig welding lesson..

@vavendano2000 Год назад

awesome. Ive wanted a 231/231 doubler for years now......and now that in building my lj I definitely need one now.

@BPDRacing1 Год назад

So rad! I am new to Jeeps and 4 wheelin' but not new to the wrenching scene by any means. I love seeing cool ways to use stock stuff and save a bundle while having a blast. Thanks Colt

@jonaathansimons7938 Год назад

'89 XJ 4.0L, manual shift AW4 with Box4Rox 231/231 doubler...love the 2wd lo, & double lo/1st gear is 94:1 thru 4.56 finals! Good to see this being done again. I did add 6 pinion planetary & wide chain (231C) to *rear case* since the torque is tripled to it. Put 4 pinion in front range box. Been runnin' it for years. Do wish I had the sight glass your kit from Froelich came with. JBFab provided my twinsticks (years b4 Josh's WJ!) Wavin' atcha from nearby 57701

@marklowe330 Год назад

I did the 231 doubler 12 years ago, and run XJ 4.0, auto, 5.13 locked 60's. Also 3 link front, 4 link rear with 40's. Crawls and climbs like boss. It's a hell of an upgrade.

@macattack1392 Год назад

Wow colt! Thanks for the info. Never thought of the "pressure test" just blowing behind the area. I figured to run a small bead of gasket maker on inside to really make sure.

@CounterproductiveproductionDIY 11 месяцев назад

I love the 231 doubler. Your work proved it self on OnX challenge. Thank you for the off road education. I like to think of you as Einstein from the south. 👍👍👍👍👍👍

@sickjohnson Год назад

That was super cool Colt!

@robink2563 Год назад

Great information and I love that you showed the build.

@dezfan Год назад

Your videos are always so informative and I really enjoy watching them. 😎

@mclarenscca Год назад

Learned a lot in this video! Who'da thunk you could make a double out of another T-case.

@mendallhaynes7340 Год назад

Yes do a video on Tig welding .

@alanmohn4146 Год назад

Your videos are the most informative out there. Great Job.

@JamisonOutdoorAdventures Год назад

Thanks for the design explanations! Learning a lot watching your videos, that’s why I ask about the shackle orientation, I just wanted to learn. My vote is for bleepinJeep!

@tracykooken2606 Год назад

that amigo, was a labor of LOVE !!!!! wow....😊

@thelonewrangler1008 Год назад

Thatnks for the dana 300 info becaise i was watching you do this mod saying how great and affordable it was while remembering that i have a TJ with 3" drive shaft😂

@abnpthfdr2934 Год назад

This double transfer case build was both unexpected and awesome!!! I've seen them in use, but I've never seen it built from beginning to end like we did here. Thanks!!!🤙

@oneshotpete6.591 Год назад

you sir are the man !!!

@rainwatercold1507 Год назад

I really enjoyed this video ❤

@autotek7930 Год назад

I didn't even make it past the ads before I liked the video. Good morning ya'll

@bleepinjeep Год назад

Awesome thanks!!

@markgordon6971 Год назад

Very interesting things you do. Nice RU-vid video. True about vandalized

@humech 7 месяцев назад

I'm looking to do this with ranger bw1350/1354 but really glad to have this info in video form too! Build is in my head anyway so far lol, not in a hurry i have a '23 bronco lol

@taylormade710 Год назад

Great content to building a doubler

@fogstain Год назад

This is a good one ,bud. Getting better all the time!

@davidboisvert617 Год назад

Great video Colt Hope the S10 is the winner. Glad viewers' are voting. after your last two videos Bleeping Jeeps back in the lead. Remember you can vote everyday to keep them in the lead. VOTE, VOTE, VOTE. :)

@jrcook927 Год назад

Voting for you guys every day!

@bleepinjeep Год назад

Thank you JR!

@rb16sk8 Год назад

Very similar to the d and d kit. I have heard that d and d went out of business due to his passing. Good job with this video

@leewelbanks6366 Год назад

With your limited shop space got get yourself a Miller Multimatic 220 welder. One welder that does everything, mig, tig, stick in a compact package.

@samwalker3441 Год назад

Very informative. Thanks for posting, Colt.

@GetCampingOz Год назад

Thanks Colt! Really well explained on how the doubler works! Such an awesome mod!

@tonyb2086 Год назад

Cool show! great info there Bleepin' Jeep is going to be a contender for sure👍

@bennelson3724 Год назад

Your content is so inspiring to beginner builders. Thanks for all the knowledge and keep it up!

@lestaylor3641 Год назад

That was a super cool money saver and gear getter video Colt.

@bleepinjeep Год назад

Thanks 👍

@j.j.clingman4083 Год назад

Awesome video Colt!!! Heck I didn’t even know that they made doublers for anything other then the 205/203 doublers!!! That is definitely good to know!!!! Remember to keep up all the hard work buddy!!!!

@doug9418 Год назад

Finally 🎉you guys are ahead, hail to Colt & Matt .

@alankatterheinrich8660 Год назад

I love this channel. 99.9% of what I've learned from here, I will probably never do anything with but it is interesting to me. Unfortunately I dont have any friends that off road or that can help me with my Xj and Im the type of guy that alway does shit the wrong way first. It takes many RU-vid videos and FB info to feel comfortable enough to do slightly technical things. I need to change my pinion gear and new bearings in my rear axle as well as new shift solenoids in my transmission.

@mh-qq2hj Год назад

Colt, I’ve learned a lot from your videos! Thank you for sharing your experience!

@larryflanigan2761 Год назад

great break down on how-to 241 doubler plus the S-10 is amazing project, Thank You

@jamesbigham9036 Год назад

Colt in my opinion that unique transfercase is really going to be a big improvement for sure

@ggalland1 Год назад

Really cool video Colt! Awesome detail in your explanations! Can't wait to see this S-10 on the road/trail

@jimtee9804 Год назад

Colt, I have to smile when I watch you work because I work alone as well.

@Blackcloud_Garage Год назад

Good stuff. I love seeing this kind of second hand, blue collar project.

@jaystax8370 Год назад

That was awesome! I had never seen that process before. Thank you!

@craigclark3279 Год назад

I really like these lessons you give. It's going to be put to good use. Thanks again.

@coreydemarce4652 Год назад

Great tip on pressure testing, thank you for sharing that. Keep up the awesome videos!

@loganstaal3162 Год назад

One quick thing a note is the VSS, this is crucial if you’re running an LS, or a.m., 4L 60 in front of it, do you need to take the mount housing and it will basically bolt on to the back of the 460 four-wheel-drive version, you’ll need no adapters, but the VSS sensor can you get a Dakota Digital SGI 100 BT and it will adapt the jeep versus signal to the Chevy pulse per mile requirement, put it in your cab so that you don’t have to worry about water damage

@SammyTheDitchDoctor Год назад

Loved the pirate 4x4 reference. Brought back memories.

@danbenjamin9917 Год назад

Great video Colt!

@jokerzwildpowers385 Год назад

Thanks for the info truly enjoy watching your stuff and learning new things

@littleoldlady1863 Год назад

Hi I really love your show you do a great job keep up the good work I will praying 🙏 for you and your family ok love Lorilee xoxoxoxox

@bleepinjeep Год назад

Thanks Lorilee

@MissionRestomod Год назад

Liquid Iron Industries leaf spring sliders are the answer to shackle reversal woes. I used them on my spring over, shackle reversed 79 Wagoneer.

@granitesand78 Год назад

So cool. I’ve never seen that before. I love all the tricks you’re using to really make a true unique rig

@katreniaclark Год назад

Very kewl Colt.

@pomnichowski Год назад

so worth the viewing... thnx, looking to see what comes next...

@hotshtsr20 Год назад

The full 231 will be loaded more than the solo range box, best spot for the 6 pinion is in the full 231

@RCRitterFPV Год назад

Although I don't have an Off road vehicle... I appreciate feeling as though I could follow along and do the repair myself... maybe next year....

@driver-xx2pl Год назад

I enjoyed it all, thanks much.

@MacsSpecialitiesMotorsports Год назад

10:21 Now you have to do a TIG welding vid because you have your own TIG welder now!!

@apexedmedia Год назад

Love a good doubler! I run a 205 with strong box!

@geriatricginger Год назад

I know Pat is a class-act guy, because of the can of JB80 @9:30 ;)

@maryannherrschaft8842 Год назад

Thanks I've been thinking about this for awhile.

@oldschoolmoto Год назад

Good info. you guys are in the lead for onx👍

@josephmcclure6229 Год назад

Great video!

@joeym2675 Год назад

Thanks for all the detailed information about this process!!! Really enjoying this build and all the cheap but Awesome upgrades your doing!!! Great Job!

@bleepinjeep Год назад

Thank you Joey!

@redfred9913 Год назад

Great training video, thanks.

@farreltucker7466 Год назад

Sweet, I`ve always wondered about that but had no idea that someone was making this stuff. Lots of good info, THANKS !

@garychaiken808 Год назад

Ingenious your a wealth of knowledge and information. Thank you 😊

@MattBrownbill 10 месяцев назад

Nice job!

@rowlinstoned3715 Год назад

I love watchin u cause u remind me so much of one of my favorite cousins i grew up with. I hope u get to go on the ultimate adventure!

@DarkHawk666 Год назад

Nice score with that Tig welder, cant wait to see you put it to work.

@_S1mba Год назад

cant wait to see the s10 done such a cool unique build

@Frontyardfab69 10 месяцев назад

Hey colt, one year ago I purchased a midnight metalworks Dana 300 rock box because of your awesome review. He has lost all contact with me within the last 6 months. I just want my transfer case man.

@s7courier Год назад

Great job and thanks..

@anthonyvirgadamo898 Год назад

You really know your stuff. Thank you

@bigmakgarage7283 Год назад

Dude!!! I remember this kit. I went looking for it on pirate a couple years ago and it wasn’t available anymore. Was super bummed. I’m sooo excited to see it’s still around! Question 🙋‍♂️ what’s the overall length of the doubler? Good work on this build I’m loving the old school tech you bring to the channel!