Chevy Cruze Thermostat Replacement GM 1.4L Coolant Leak / No Heat

Подписаться 581 тыс.

Просмотров 196 тыс.

50% 1

On Amazon:
*THERMOSTAT/HOUSING: amzn.to/33ghUmJ
*COOLANT OUTLET HOUSING: amzn.to/33PTBwu
*E TORX SOCKETS: amzn.to/32zR0qC
*HOSE REMOVAL PICKS: amzn.to/2MyTAas
*MILWAUKEE M12 RATCHET: amzn.to/2Silnwk
*HOSE CLAMP PLIERS: amzn.to/32JyYC0
*OBD 2 SCANNER: amzn.to/2LuGQQ8
*MECHANICS TOOL SET: amzn.to/2NctGIC
*COOLANT PRESSURE TESTER KIT: amzn.to/2DeX1hd
Quick instructions on how to replace the thermostat on this 2016 Chevy Cruze 1.4L turbo engine. `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: ru-vid.com...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com/cgi-bin/webscr...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy
~Sailing Doodles: / @sailingdoodles

Авто/Мото

Опубликовано:

16 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 247

@NoNonsenseKnowHow 4 года назад

*THERMOSTAT/HOUSING: amzn.to/33ghUmJ *COOLANT OUTLET HOUSING: amzn.to/33PTBwu *E TORX SOCKETS: amzn.to/32zR0qC *HOSE REMOVAL PICKS: amzn.to/2MyTAas *MILWAUKEE M12 RATCHET: amzn.to/2Silnwk *HOSE CLAMP PLIERS: amzn.to/32JyYC0 *OBD 2 SCANNER: amzn.to/2LuGQQ8 *MECHANICS TOOL SET: amzn.to/2NctGIC *COOLANT PRESSURE TESTER KIT: amzn.to/2DeX1hd

@dancurrier6421 3 года назад

how come no antifreeze coming out of the hose you pulled of and when you take of the housing there should be antifreeze coming out of there too please explain

@NoNonsenseKnowHow 3 года назад

@@dancurrier6421 without going back to view the video. My first guess is probably because I drained the coolant?

@dancurrier6421 3 года назад

hello I like watching your videos I just started to watch them. Trying to figure out my problem on my 2015 Chevy Cruze 1.4 tubro Eco LT takes for ever to heat up in cold weather

@NoNonsenseKnowHow 3 года назад

@@dancurrier6421 thanks man appreciate you checking the channel out. If it takes long to warm up you could have a faulty thermostat that is partially stuck open or opening too soon. Or if the coolant level is too low sometimes that will cause you to have intermittent heat because the heater core will only be partially full of coolant

@christalbeckley4275 3 года назад

You never lied. Always replacing something with the coolant department. Hoses thermostat heater hose etc

@d-247infantry9 3 года назад

For real.. I replaced every part thinking its the upper pump, lower, inlet hose ect like wtf and now a therm all in 2 weeks😵

@ballhawk387 4 месяца назад

Indeed! In my case, this simple fix corrected the dreaded P0299 and P00B6 codes as well as the P0128 code that clued me into this relatively quick, inexpensive, and easy (but for that atrocious brittle plastic hose breaking) fix. Could save somebody from being buffaloed into an unnecessary turbocharger repair that costs a king's ransom.

@donaldduck6414 3 года назад

Straight to the point, I love it. Too many of the same videos are 12 to 25 minutes long and explain the same thing. I appreciate the video immensely. AWESOME!

@TheBikeWizardAus Месяц назад

Just said how much I enjoy your channel yesterday watching the El Camino series. Today I was replacing the thermostat on my son’s Holden Cruze, we search RU-vid for some hot tips, how happy was I when I heard your voice! Thanks for the help Chris you made it easier for us!🇦🇺

@kobusvanniekerk2635 Год назад

Great video. Two things I would do different. One, I would not splash the motor with water just after the job because if there are any leaks, after the job, you won't know it is leaking because everything is wet. Leave the cleaning for much later once you are happy there are no leaks. Two, first loosen all three bolts and then it would be easier to remove that clamp with some pliers.

@angelineurysty4385 2 года назад

Thank you! My thermostat gasket was leaking like a sieve on my 2014 Buick Encore after a short road trip - had a big tear in it (how that happened, we don’t know). Found this video very helpful, and with a good deal of help from my boyfriend (he had the tools and the strength to loosen bolts and clamps) I got a new thermostat and gasket put on, and it’s all working perfectly now. There were a few differences between the cars (most notably a bloody steel line that was still in the way of one of the bolts), but we got it figured out. Wouldn’t have had the courage to try, but your video made it look at least doable. Saved me a chunk of money by not having to take it to the shop. I appreciate the time you took to do the video.

@NoNonsenseKnowHow 2 года назад

Thank you for sharing your experience and glad to hear the video was helpful!

@azarellediaz4892 Год назад

The reason that gasket was ruined in a short period of time is due to pressurized water and steam being pushed trough the leak, it acts like a knife that can slice rubber very easily. I’m glad you got it done.

@ballhawk387 4 месяца назад

Exceptionally well done, the best, most concise description of this job from start to finish I've seen here. In my case, the corrugated hose and its squeeze clip *both* broke, and I found the thermostat to have *no* gasket. It also kicked out 2 other codes, including the dreaded P0299. I patched the corrugated hose with rubber hose sections and self-sealing tape, the parts place not having a replacement for that brittle, engineering atrocity of a plastic hose. All codes were gone, much appreciation for this concise fix for an issue anyone with these vehicles will *inevitably* reckon with.

@jamesbramblett3346 2 года назад

This is a guy I would let work on my car 🙌🏻 you can tell he is skilled and cares

@PharaohMoan Год назад

My mom’s Chevy Sonic needs a new thermostat, but I’m not paying $500 dollars to have it done. And this is the first video I found that explains the pinch snap that I was worried about breaking. Thanks man! I found a Venmo for you, but it hasn’t had any activity since 2020. Send me some info so I can make a contribution.

@DrizzySinceTime 3 года назад

Your channel is a god-send bro. Thank you so much for the information. Gonna be doing a thermostat housing and hose replacement tomorrow morning. Liked, commented & subscribed. Im in!

@NoNonsenseKnowHow 3 года назад

Thanks man I appreciate the feedback and support! Good luck on the job

@hawkdsl Год назад

He is correct... you will be replacing these items. The water pump, the thermo, and the outlet housing on the drivers side. The coolant reservoir (they crack). Heater hoses, and all the water hoses for that matter, are actually pretty good quality, so that part is rare. I would recommend using your favorite auto parts store brand for replacements. If you have a floor jack and a good set of inverse torx, it is easy as pie to do all these jobs.

@joegonz3864 6 месяцев назад

Thanks for the video. The purge at the end of the video really helped me out and it’s way easier than do the bleed screw. Thanks👍🏼

@andyquick5839 4 года назад

More than once I have had to put the car up on ramps in order to get all of the air out of the system. Sometimes you need to make sure that your coolant reservoir tank or radiator cap are the highest point in the system in order for all of the air to bleed up to the top. Sometimes just running the engine at a high rpm doesn’t work. Just a tip for those who may do this procedure and still not get any heat out of the heating ducts.

@NoNonsenseKnowHow 4 года назад

Yeah totally agree with you on that! These are pretty good about burping out really fast

@ricklange1567 Год назад

It might be worth mentioning at the beginning that different Chevy Cruze engines will have different placement and configurations of the thermostat and housing, My wife's 2012 Cruze has it on the right side of the engine next to the battery!

@kevinnorris3183 3 года назад

Thank you very much you really cut that down and didn't sit there in profile like every 5 seconds and Hawking some product Love the video short and sweet thank you very much

@GNOBNX 16 дней назад

Dude, you’re a no nonsense guy. I love it! Thx 🙏🏽 …

@buildfixcars Год назад

Man you are awesome! Great step by step instructions!

@kaitletson898 2 года назад

I took my car to the mechanic last year and this is what was wrong with it. Cost me almost 400$. I’ll do it this time. I do have a question though. Is it okay if you drive it while the thermostat is broke? Or will it mess up the car even more. Thanks for the video you’re a lifesaver!

@ivanbarbosa3132 2 года назад

Thank you so much!! My cruze takes about 30 min to warm up. Should I replace the thermostat?

@justinv3080 4 года назад

I have the trifecta advantage tune on mine, turns the boost upto a little over 20 Psi max, a nice jump in power plus it comes with some cooling systems recalibration which turns the fans on low at 195 and full at 220, I basically never see more than 209F now where before it would hover between 222-229F all the time, hoping that helps with some of the plastic fatigue on the cooling system parts too.

@NoNonsenseKnowHow 4 года назад

Nice. Sounds like a good upgrade! Good to keep it cool

@justinv3080 4 года назад

@@NoNonsenseKnowHow yeah not bad for only $300

@bobfisher1909 3 года назад

I believe specs for torque is 8Nm or 71 inch pounds same as water pump, cheers.

@GusMahn Год назад

Well done vid. Might as well change the surge tank and the hose to the outlet as well as the outlet at the same time. All kinds of cooling problems on this engine, but the outlet is the most common failure.

@amyrackley6833 2 года назад

Thank you so much for this video. It helped alot replacing the thermostat housing.

@williamshaw667 Год назад

Thanks for the video you make it look easy, other videos make this job look hard.

@thomasbradley4868 2 года назад

Thank you your video has one thing that the other is that you show the remove one screw and you can drain the radiator without having to remove the bottom hose because I am at that point and I can't get the bottom hose off so now I know what going to do.

@PlagueXKill3R Год назад

Put in a brand new thermostat and housing and my check engine light is still on and cooling system fan is running constantly. Even though bad thermostat came up on the scan, brand new thermostat didn't fix the problem??? How does this make sense? *Edit* Just had to unplug the battery to reset the computer and light went off

@eddieweigel9490 2 года назад

Same setup Chris as my wife’s 17 trax I just thermostat she had no heat thermostat was stuck open seems like an on going problem for the Cruz trax encore

@Keep711 Год назад

Thank you! Excellent video. Perfect instructions.

@donaldlajeret299 2 года назад

You are absolutely right cooling system nightmare 😲

@0gaven Год назад

Great Video thank you! Was very helpful I did like how the car went from Chevy to Buick at the end . 😂

@jerrymaushard3835 3 года назад

What is the sensor at the thermostat housing? What does that control? I have a Chevy Sonic and am troubleshooting a radiator fan not running issue.

@pauljohn5554 4 года назад

Thanks. That helped out a lot

@thedads5 3 года назад

Great video. Thanks for being right to the point.

@NoNonsenseKnowHow 3 года назад

Thanks. And no problem

@nicktheamsoilguy 3 года назад

Great video, thanks for posting it. 💪🏻

@NoNonsenseKnowHow 3 года назад

Thanks bud and no problem

@Axxion1981 Месяц назад

The lower smaller hose, my hose clamp slid all the way down to where I can't reach it. Think I can just buy a new clamp or do I need to find a way to fetch it?

@shaunsfrench1942 9 месяцев назад

I have a 2012 cruze and a hose on top that goes to radiator is suctioned in when the ran comes on and Im attempting to replace t stat.. hopefully thats it. 1 person says I might have a blown head gasket, but I dont know.

@GNUTTY816 3 года назад

I found the leak and this video helped me out so much to get the repairs done. Thanks

@NoNonsenseKnowHow 3 года назад

Sweet, great to hear!

@jessesalcido2562 4 года назад

Sweet nice clean work!!!

@NoNonsenseKnowHow 4 года назад

Thanks man! Elementary job but I'm sure it will end up helping out a few DIYers!

@benrutt8940 2 года назад

Did you leave the reservoir cap off when bleeding?

@chrismechanic6164 5 месяцев назад

My understanding after much research is that the sensor in the housing isn't a sensor at all but a heating element that is controlled by the computer. Any time the engine is under heavy load the computer turns element on to aid in opening the thermostat earlier to allow for more cooling. The continuous operation of the element if the car sees hard driving contributes to both early failure of the thermostat itself and or leaking of seal or cracking of plastic housing. Additionally if the unit fails or burns out the temp Guage will show cold constantly while the fans may run continuously on high with dash warning tells you engine is hot (even when not) and AC is shut down. Driving with a system leak without immediate repair and continuously adding coolant can also lead to early failure of the element requiring thermostat and housing replacement since it comes as a unit only.

@carlos14on 3 года назад

Great job, very clear, Thanks NoNonsenseKnowHow, Kudos!

@NoNonsenseKnowHow 3 года назад

Thanks Carlos I appreciate the feedback

@spooniecamper 4 года назад

Another great video!

@NoNonsenseKnowHow 4 года назад

Thanks!

@jakubchodilek6882 2 года назад

My chevy cruze 2012 doesn't heat only on passenger side. Do you think I can fix this problem same as you and change termostat?

@darrellbanks6190 Год назад

Great info.... nice camera work

@sancheztorres35 2 года назад

Wow excelente video very well explained thanks

@chivas5665 2 года назад

exactly what i needed thank you

@NoNonsenseKnowHow 2 года назад

No prob

@customercervice3322 10 месяцев назад

Appreciate the video. Quick and easy and no bullshit mumbo-jumbo on the side. Lol

@abelmorales4303 2 года назад

Do you drain the coolant before replacing the thermostat????

@balkenkreuz2063 3 года назад

Thank you for your videos. I'm working on my 2012 sonic (1.4 manual) which has a crack water outlet. And just for good measure I might as well change the thermostat just in case. I mean, it only has 50K miles but I have had it for 10 years now. My only question would be: should I go for acdelco/OEM or a cheaper brand would do?

@jedeshchandrasegaran6689 2 года назад

I went with advance auto parts motorad which had one year warranty. Failed 8 months later and got it replaced with same one again. Water pump I went with the car quest because it comes with lifetime warranty. I never had issues with advance auto store parts except this thermostat.

@gabesfam915 Год назад

6/5 stars great video thanks!

@raymorley8241 Год назад

Is this housing available in aluminum? I know the coolant distribution housing on the other side of the engine is.

@MrTonlo 11 месяцев назад

I've seen some aluminum housings, would you recommend it for a 2012 chevy cruze 1.4l turbo

@ataz0th218 Год назад

What’s the sensor on the top of the housing you disconnected?

@augustosaviatto1673 2 года назад

Great video. Thanks for sharing.

@chrisc3901 7 месяцев назад

Thx for the video bro ,it helped me alot

@lukedunlap4760 4 года назад

Nice video!! GM SHOULD be forced to recall & upgrade the 1.4L Turbo PCV check valve system...and the crappy plastic coolant elbow on the Dr side of Engine block! WHY does GM always cheap-out on the little things, and in this case, wreck what is fundamentally a decent engine!??!

@justinv3080 4 года назад

I have the cruzekits.com pcv fix v2 on mine for over 30,000 miles. Great upgrade and the new v3 kit is even easier to install

@albertleroux1407 3 года назад

Excellent info.

@actuallywicked4228 2 года назад

hey, my dads cruze 1.6 lt is throwing up a code 89. some say its a service oil light and some say it is a thermostat. do you know if this is correct. Im in the Uk by the way.

@emr7956 Год назад

What a damn good video.. Thanks for posting

@MiniWhale81 Год назад

Is the procedure same for the 2012 LS model

@40mrpanther 8 месяцев назад

Just found out mine was leaking from this housing. I found a metal one I ordered and going to replace it with it. I don’t like all of this hot coolant going through all these plastic components

@MegaKenoi 3 года назад

The was very helpful, thank you so much

@NoNonsenseKnowHow 3 года назад

No problem in great to hear it helped out

@cesardeluna4560 2 года назад

Good thanks for your effort and information

@NoNonsenseKnowHow 2 года назад

No problem!

@Yuhhhhhhhhhhhhhhhh 2 года назад

Mines stuck closed, thanks for the video

@Gj-xp7ht Месяц назад

Will this help if my car is running hot with the ac on sir?

@johnasap777 4 года назад

Good job 👍✌️

@2bnax 26 дней назад

THE HOSE AT 3:10 , CAN IT BE REPLACED FROM WHERE YOU ARE WORKING. I CAN FEEL THE OTHER CLAMP BUT THE CLAMP IS SO TIGHT?? ALSO, CAN GASKET SEALANT HELP??

@brandonduncan943 Год назад

It’s crazy these cars have cooling problems like this especially it having a turbo. But I guess that’s what happens. I don’t know about dumping water on that though… that won’t damage the belt or anything?

@miab82 3 месяца назад

You were 10000% correct about the "coolant system nightmare" in these crappy vehicles. Nothing but coolant catastrophies 🙄

@ipreferlovethanhate7855 Год назад

Why these 2 thermostat were different with each other they don’t look the same would that work???

@ashwinreddy6702 2 года назад

Hey man, great video! I have a question if you can answer... about a month back i made the mistake of mixing regular coolant and dexcool coolant in my chevy cruze. Then fast forward to this month, I started smelling burning coolant, then one day i got the engine overheated warning, i immediately stopped the car, and found the coolant completely gone... filled coolant up, and took it directly to the mechanic. He basically said the thermostat is stuck and needs to be replaced... along with a coolant flush. Does this sound like the right diagnosis? Someone else said the water pump could be leaking. Anyway just wanted to get your two cents :)

@ashwinreddy6702 2 года назад

At one point the heat was also weak

@MichaelCowden 2 года назад

Doesn’t petroleum degrade rubber gaskets over time? Seems like your dielectric grease would be a better choice for gaskets and such rather than oil or grease. Also the torque on those bolts is just a touch under 6 lb ft but I set it for 6 and no leaks. Thanks for the video.

@NoNonsenseKnowHow 2 года назад

I don't believe they're rubber. And cool thanks for adding the info

@thelastosirus 2 года назад

Correct, petrolatum degrades rubber. But he's prob right that those gaskets are nitrile and not rubber. Better just to be in the habit of using silicone grease anyway on packings.

@user-ev3mx8kx6p 9 месяцев назад

What hoses come of the thermostat

@esewey7955 3 года назад

Thank You for the video! The hose with the clip that connects to the thermostat now has a small leak.. does this hose go bad over time? Maybe the O ring in there? Any tips would be appreciated thanks. 5:35

@NoNonsenseKnowHow 3 года назад

Yes there is an O-ring inside. It may have got a little tear on it. You should be able to replace it. Might be hard finding one the right size though. Or take it back off and check it for Tears. If it looks okay, coat it with grease and put it back together

@esewey7955 3 года назад

@@NoNonsenseKnowHow Thank You My man!

@NoNonsenseKnowHow 3 года назад

@@esewey7955 no prob!

@DavidHernandez-ue4fz Год назад

@@NoNonsenseKnowHow if I can't find the o ring,can I use a regular hose and clamps?

@christopherbreyfogle806 3 года назад

Hey man, you know if these motors are the same that are in say a Buick Encore 2013? I appreciate it!

@NoNonsenseKnowHow 3 года назад

If you have the 1.4L then yes

@sandyturner4029 10 месяцев назад

yes s I agrea like the 2015 chevrolete trax from sandy Turner turbo gaskets thermostat housing valve cover gasket turbo gasket it and oil filter housing ? fan belt tensnnore the alttenatar is at the back orginally its suppose too be at the front ?

@sandyturner4029 10 месяцев назад

there should off been recalls ?

@scottwilliam1530 2 года назад

Can you replace just the thermostat?? Do you have to replace the housing or can you put a new thermostat in the existing housing after you remove it? I locked my keys in the car with it running haven't had any problems with it until that point now the radiator fan runs constantly and the gauge does not ever come off of cold obviously I burned out the thermostat. But do I have to replace the whole thing or can I just remove the housing replace the thermostat and then re-install the entire unit??

@birddog3130 Месяц назад

No. Replace the Whole unit...its a newer, better version on Amazon $49.

@vienvu1687 Год назад

Does this line have to be flushed with water?

@jimaddis81 3 года назад

Great video

@NoNonsenseKnowHow 3 года назад

thx james

@daquannelloms7821 3 месяца назад

Does this work for the 1.8L Chevy Cruze LS 2014?

@Zeek800 13 дней назад

Another leak point on these engines is the coolant reservoir itself. Where the larger of the two hoses connects, the GM reservoirs are notorious for the plastic “ pipe “ that the hose connects to cracking. Is this case a Dorman reservoir has a metal sleeve over that plastic “;stem pipe “ that should strengthen it.

@aaronwood3540 4 года назад

Ok so mine has this big spring that was up inside the aluminum housing when I took mine apart and did not have a spring on the thermostat side. The new one did not come with the big spring but does have one on the thermostat. So do I need to put in the big spring on leave it out?

@NoNonsenseKnowHow 4 года назад

It's hard to give you a reliable answer without actually seeing it. But I assume the Big Spring you're talkin about was the thermostats spring. So no you do not need that

@aaronwood3540 4 года назад

@@NoNonsenseKnowHow awesome I think the new part was redesigned and I kind of came up with that assumption and I tried it and it's working fine so thank you

@user-vn1dk4rn2j 19 дней назад

Nice thank you

@CookyCutter 4 года назад

Mine is leaking where the housing meets the water pump, is there a new gasket in the set?

@NoNonsenseKnowHow 4 года назад

Yes it comes with the gasket. Or you could just replace only the gasket more than likely. But for how cheap the entire part is might as well replace it

@dado8117 4 месяца назад

Thank you sir!!!!

@faresmohammad8724 3 года назад

great job thank you

@ashrafsiddiquee3190 3 года назад

Do u HAVE TO drain the coolent first to replace the thermostat ?? Can I replace the thermostat without drain the coolent from underneath the vehicle. Please let me know so I can start the process. Thanks in advance

@NoNonsenseKnowHow 3 года назад

Yes you can. Just make sure to put a pin underneath to catch the coolant that's going to come out when you take the housing off. And also make sure the engine is cold and system is depressurized

@ashrafsiddiquee3190 3 года назад

@@NoNonsenseKnowHow thanks a million brother. Bless you. Happy Ramadan to you and your family 👪 ❤

@Marco49511 5 месяцев назад

Does anyone know where can we buy these parts from other than plastic?

@joseywales8442 3 года назад

thanks brother ..👍👍

@wilfredomaldonado3349 4 месяца назад

Thank you

@whitemumbaskate 2 года назад

Do you put the coolant cap back on after filling the coolant or do you let the car rev with the cap off

@NoNonsenseKnowHow 2 года назад

Let the car run with the cap off to allow the air bubbles to escape

@781FishingAndOutdoors 10 месяцев назад

Thanks buddy!

@paulhager1281 26 дней назад

I pulled the sensor out ..the first clip.and there r wires hanging out of it..on urs their was no wires...my thermostat is zero..it just went out on the road

@zzoinks 9 месяцев назад

Does this car have an electronically controlled thermostat? It's kinda hard to find info about it online but I came across one forum post saying it's electronically controlled with a grid controlled electronic wax pellet type. It is a post on Cruze Talk called Electronic control of thermostat temperature 1.4T and I would post a link except RU-vid nukes all comments with links.

@zzoinks 9 месяцев назад

But no product listings mention electronic control, which is surely a feature they'd mention if it was present right?

@irenechavez9598 3 года назад

Good job thanks

@NoNonsenseKnowHow 3 года назад

thanks and no prob!

@f1refigh7er 2 года назад

Would this s be the repair for code p0597?

@Phillies1red Год назад

After you burp it... do you put the cap back on while the car is running or do you stop the car shut it off and then put the cap on?

@birddog3130 Месяц назад

Doesn't make any difference.

@thebardock6785 2 года назад

Just replaced mine last year, and a tear later having to do it again

@Manuelboii 2 года назад

Anyone have trouble with the O ring falling out of the lower coolant hose. Mine was like over sized and needed it replaced some reason having issues finding the right size to fit in there! Hes the only one who even mention that Lil Oring!!!

@dykema_dark_market5628 Год назад

Ask part store clerk to go in back to find the o- ring. I do it all time especially autozone.

@DavidHernandez-ue4fz Год назад

@@dykema_dark_market5628 do you know if they have the o ring for sale?

@dykema_dark_market5628 Год назад

@David Hernandez they do just ask them for o ring from back drawer. They'll walk you back there to find your size they are like $2-$5. Just make sure you bring old one in to compare. They do have size of every ring.