No video :(

Citroen C1 Indicator stalk replacement, Same as 107 & Aygo

Подписаться 58 тыс.

Просмотров 27 тыс.

50% 1

Indicators and hazard lights not working. Step by step guide on how to replace the Indicator switch on a Citroen C1 / Peugeot 107 / Toyota Aygo
Check out the diagnostic machine I use - diydaly.co.uk/...
Check Euro Car parts for stalk (use discount codes on site) - tidd.ly/3b6f0bx
Budget Indicator stalk on eBay - ebay.us/LrwDut
Budget Indicator stalk on Amazon - amzn.to/3kz16BE
Tools used : Amazon / eBay links
Long Reach torx bits - amzn.to/382unjk
Socket Set - amzn.to/2O6BUmM
1/2 Dewalt impact driver - amzn.to/3e2Uff2
3/8 Drive Mini Impact driver - amzn.to/3iFCZ30
Torx bit set - amzn.to/2Di0JtH
Copper hammer - amzn.to/2Z9bdUU
Screwdriver set - amzn.to/3kAttPW
Small snap on flat blade screwdriver - ebay.us/S62oNB
Needle nose pliers - amzn.to/3b3RZWu
Check out my other C1 / 107 / Aygo videos :
Front wheel bearing replacement - • Citroen C1 Front Wheel...
Front Brake discs and pads replacement - • How to replace front b...
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. www.youtube.co...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@diydaly 3 года назад

Check Euro Car parts for stalk (use discount codes on site) - tidd.ly/3b6f0bx Check "Car parts for less" for stalk (use discount codes on site) - tidd.ly/3uJ7vir Budget Indicator stalk on eBay - ebay.us/LrwDut Budget Indicator stalk on Amazon - amzn.to/3kz16BE Tools used : Amazon / eBay links Long Reach torx bits - amzn.to/382unjk Socket Set - amzn.to/2O6BUmM 1/2 Dewalt impact driver - amzn.to/3e2Uff2 3/8 Drive Mini Impact driver - amzn.to/3iFCZ30 Torx bit set - amzn.to/2Di0JtH Copper hammer - amzn.to/2Z9bdUU Screwdriver set - amzn.to/3kAttPW Small snap on flat blade screwdriver - ebay.us/S62oNB

@chrissainton-clark3043 Месяц назад

This video is brilliant. I am known in my family for being utterly inept at anything mechanical or car related and am always joked about. I carefully followed this video step by step took my car out for a spin and I’m still very much alive!

@diydaly Месяц назад

👍👍

@recrafteduk 2 года назад

Copied the video to the letter. Job done! Simple, well shot, easy to follow and refreshingly, not about the ego of the person for once. Well done Gav and thanks 👍

@diydaly 2 года назад

Nice one! Thanks for the comment! 👌👍👍

@pauldyson5562 3 месяца назад

Absolutely brilliant video! Started teaching my daughter to drive and then the indicators stopped working (typical). This saved me an expensive trip to the mechanic. Clear instructions from beginning to end, job done, and a happy daughter looking forward to her next lesson! Thanks so much 😊

@whatsmining9917 Месяц назад

Same for my son first time out managed to fix the switch removed the back & clean the tracks works perfectly now he got a driving lesson & a fixing your own vehicle 😂

@scottnelmes7137 2 года назад

This is the best tutorial I’ve watch! Thank you for making it so clear. My other half and daughter have the problem with the indicators at the same time on their cars and I have managed to do both by watching this. Brilliant thank you. Scott

@diydaly 2 года назад

Glad it helped! thanks for the comments, feedback is always appreciated! 😃👌👍

@jonathanbignall1198 2 месяца назад

Thanks a lot for this, my step daughters' C1 had a failing indicator stalk, it was just getting temperamental.and needed jiggling to make the indicators come on. I did have some trouble getting the old stalk assembly off the steering shaft, it didn't want to budge despite pinching the metal clip with pliers. In the end I had to use a screwdriver as a lever behind the stalks to break them free. All came together in the end though, thanks for the clear instructions!

@russmoore1433 5 месяцев назад

Brilliant video, thank you so much. Managed to get the job done in an afternoon today. The steering wheel was a sod to get off but I finally achieved it by use of brute force, ignorance and a big hammer. I did find getting the bottom cover difficult to undo as I'm not as bendy as I used to be and the eyesight isn't so good peering up a very small tunnel to try and spot a screw at the far end. However, taking the steering wheel off first gave me the necessary wriggle room. I put the column covers back on before reattaching the steering wheel for the same reason. Reconnected battery and everything worked. Cost of part under £20, no specialist tools required. Saved me a fortune!

@diydaly 5 месяцев назад

👍👍 glad to hear it

@chrisburtle9883 7 месяцев назад

Excellent video! I'll give most things a go but there was a couple of stages during this task that I could have fell foul of without watching this video through first. Took two hours from start to finish with the help of this video, thank you!

@diydaly 7 месяцев назад

Nice one! Glad to hear it 👍👍

@miacaff99ify 2 года назад

Saved us £246. Such clear instructions would not have been able to do this with instruction manual. Thank you sooo much 😘

@diydaly 2 года назад

You're welcome! glad it helped! thanks fir the comments 👍👌😃

@robertf2715 2 года назад

Just changed my sister's indicator stalk after watching this video, and it's spot on. Everything I needed to know was covered, nice one.

@diydaly 2 года назад

glad you got it sorted! thanks for the comment 👍👌

@johnmacgregor6544 2 года назад

Brilliant video many thanks, far easier than flicking back and forth in the Haynes Manual, nothing missed out, and all back together and working again.

@diydaly 2 года назад

Thanks for the comment , much appreciated 👌👍

@martynguest2892 2 года назад

Great Tutorial. Thumbs up to you. I'm quite confident with some car repairs, but it always nice to get a refresher every now and then. I repaired a friends car in about an hour. The local garage wanted £180 to fix it, but it only cost me £30. That was for the indicator stalk and a pair of long nose pliers. Keep up the good work.

@diydaly 2 года назад

Nice one, thanks for the comments! much appreciated as a small YT channel 😃👍👌 there will be plenty more to follow

@nutrocker60 2 года назад

A no nonsense video, straight to the point and job done good work mate

@diydaly 2 года назад

Thanks for the comment, much appreciated 👍👌

@garybeecroft4565 4 месяца назад

Quality video. Very precise and well filmed.

@diydaly 4 месяца назад

Thank you very much!

@dangreasley7934 Год назад

Top video and thanks. Have followed this to the letter to replace the indicator stalk on my daughters C1. Perfect job completed in an hour or so. Cheers,

@diydaly Год назад

nice one, glad it helped 👍

@leighglenglen5495 3 месяца назад

Thank you very much. With replaying your video after every setting. It took 2 hours. But thank you for your help.

@paulskelly7389 2 года назад

Great video, really well explained. Just finished doing it and it's all working fine. One suggestion, the bottom cowling is a pain to get on while the steering wheel is in place. Possibly put it on first before putting the steering wheel on.

@diydaly 2 года назад

thanks for the comment, much appreciated 👍 Ill take note of that for next time 👌

@leonmartinville7628 4 месяца назад

Thank you my friend for this precious helping hand and for your very clear explanation. Have a nice day

@diydaly 4 месяца назад

Thank you! You too!

@fremenondesand3896 2 года назад

Did it, wouldn't have been possible without a guide. Didn't have a mallet, so I wedged up some cardboard between the steering column and my hammer as not to damage anything. I was still able to re-thread the nut on. Didn't have a 19mm socket (or whatever it takes) but I do have a 3/4" which fit. Now I've got to figure out the cowling, but I don't need that to drive.

@diydaly 2 года назад

👍 what ever works , at least you got it done 👌

@DavidR_192 2 месяца назад

Cracking video mate. Doing this tomorrow and this was a huge help 👌👍

@diydaly 2 месяца назад

Glad it helped 👍👍

@on_your_yoga_mat 2 года назад

Really clear video thanks- managed to do it though the steering wheel was an absolute nightmare to pull off! 👍👍

@diydaly 2 года назад

Nice one , thanks for the comment! Yeah they can be abit tight some times 😬

@richardshomemechanics5566 Год назад

Great little video thank you 😄

@diydaly Год назад

👍👍

@barrywoodcock5857 4 месяца назад

Thanks just changed mine Part £25 Labour £0 😊

@diydaly 4 месяца назад

👍👍

@mictaylor9531 Год назад

great little video - thanks! just did my lads in 25 mins with your help

@diydaly Год назад

nice one, glad it helped

@ikusny Год назад

Very good video, but only tool you need to sort it out is Electrical cleaner, spray it from side where are the indicators and play with them for 5 min. I had 5 of these c1/107 and this method always work and cost you £3 and 5-10 min job 👍

@diydaly Год назад

thanks 👍, ive done the before but find it doesn't last very long mate

@stevemcloughlin6901 2 года назад

Excellent video and clear explanation. As others have commented, followed your intstructions and replacement was made very easy. Thanks.

@diydaly 2 года назад

Nice to hear it! Thanks for the comment 👍👍

@KN-yc8wu Год назад

Look fairly easy so I'm going to give it a go. Just need to get T30 long enough as I think mine won't fit in the recesses in the airbag part. I'll try to remember to post again when I've done the job. Cheers.

@diydaly Год назад

👍 yeah no bad to do mate

@KN-yc8wu Год назад

Brilliant video! just changed the switch on my son's C1 and all went exactly as per the video - thanks.

@diydaly Год назад

You're welcome! glad it helped

@KN-yc8wu Год назад

@@diydaly My son just texted me, the air bag light has come on. Was ok yesterday when he drove home. Any ideas?

@diydaly Год назад

@@KN-yc8wu most likely due to the squib, was it disturbed ? The need to be kept in exactly the same position mate

@KN-yc8wu Год назад

@@diydaly not disturbed as shown in your video. Horn works for all steering wheel positions, and fault appeared about 10min after my son set off home. I'll check connectors when I get chance but was wondering if fault would be logged on ecu?

@diydaly Год назад

@@KN-yc8wu yeahs that odd , could just be the connection onto the squib it’s self , it will have stored the fault in the airbag ecu so hopefully that will point you in the right direction , only other possibility is the under seat pretensioner connections , I presume you’ve move the seat abit while doing the job, this might of disturbed the connection.. sometimes just simply disconnecting/re connecting and clearing the fault code will work.. if not you may need to hardwire the connection..

@edturnbull5362 Год назад

Fantastic stuff! Made the process so straight forward cheers.

@diydaly Год назад

nice one . glad it helped 👍

@GG-pq2gh 9 месяцев назад

Cheers for filming this 👌👌👌

@diydaly 8 месяцев назад

Glad to help

@valentinoricey 10 месяцев назад

Brilliant video,took me all of 20mins👍🏻

@diydaly 10 месяцев назад

Great to hear!

@alessandrotubero Год назад

very useful video, clear and easy to follow. Thanks!

@diydaly Год назад

👍👍

@philcousins3764 2 года назад

Excellent video, clear instructions, just did mine using your guide, thank you 👍👍

@diydaly 2 года назад

Glad to help Phil , thanks for the comment 👌👍

@tonimahoni4714 Год назад

Nice clear video mate.... Very good!😊

@diydaly Год назад

Thanks a lot! 👍👍

@razzledazdazzle Год назад

Thanks, made the job easy!

@diydaly Год назад

👍👍 glad to help

@chrisedd8602 Год назад

Excellent video. Thanks

@diydaly Год назад

Glad to help 👍👌

@mrrobnash 3 года назад

Brilliant, worked a treat.

@diydaly 3 года назад

Glad you got it done , thanks for the comment, much appreciated 👌👍

@aleksandrzinkevics1253 3 года назад

outstanding car. have done cruise control on it. happy days😀

@diydaly 3 года назад

👌👍👍

@whatsmining9917 Месяц назад

You can fix it for free you just need to clean track's inside the switch it's because the grease goes old and forms a dark none conductive layer on the tracks you just need to split the switch & clean the tracks with a scourer pad

@kaj661 3 месяца назад

Changed mine, went great thanks to your video but the indicator doesn't self cancel. The stalk was admittedly quite cheap. Could the self-cancel issue be something i did wrong or just a cheap indicator stalk?

@diydaly 3 месяца назад

I’d say it’s more likely the stalk at fault tbh , there’s isn’t too much to get wrong

@stonegeko4792 3 года назад

Graat vid. Followed it and repair no problem. Many thanks

@diydaly 3 года назад

Nice one, thanks for the comment 👌👍

@vomanvoman9538 Год назад

Excellent. Would you please help me to change? Thanks a lot

@jamestrueman3462 Год назад

Thanks for this - everything has gone like a dream right up to the spring clip behind the indicator - despite squeezing it together there is no movement on the indicator assembly? I can't work out why it's not coming off - any ideas? cheers

@jamestrueman3462 Год назад

sorted it - found the plastic retaining clip and released that

@diydaly Год назад

👍👍 nice one 🙌

@MatteoMagnani01 6 месяцев назад

Hi! So far everything smooth but now I’m having the same problem - despite squeezing the clip and loosening the metal ring, the indicator doesn’t come out. Could you explain what needs to be released? What’s the plastic retaining clip and where is it? Thank you so much! 🙏🏼

@leighwaters9805 Год назад

Is it necessary to put keys back in whilst doing it after removing cowling.

@diydaly Год назад

no you can leave out 👍

@leighwaters9805 Год назад

@DIYDaly Thank You, 100%too marks video was as said, even down to screw type and size of hex screw. Brilliant. Defo saved a few Bob today Took total of 10mins watching 5mins getting tools ready, 25mins , job done ✔️ 👏just edited my typo errors

@diydaly Год назад

@@leighwaters9805 Nice one! glad it helped 👍👍